[Concepts] The Sometimes-Serious-Concept-Drawings Thread
Forum rules
Before posting your Resource, please make sure you can answer YES to any of the following questions:
Consult the Resource/Request Posting Guidelines for more information.
Please don't put requests here! They have their own forum --> here. Thank you!
Before posting your Resource, please make sure you can answer YES to any of the following questions:
- Is the resource ENTIRELY my own work?
- If no to the previous one, do I have permission from the original author?
- If no to the previous one, did I put a reasonable amount of work into the resource myself, such that the changes are noticeably different from the source that I could take credit for them?
Consult the Resource/Request Posting Guidelines for more information.
Please don't put requests here! They have their own forum --> here. Thank you!
-
- Posts: 1048
- Joined: Sun Aug 02, 2015 1:20 am
- Graphics Processor: ATI/AMD (Modern GZDoom)
- Location: Czech Republic
Re: [Concepts] The Sometimes-Serious-Concept-Drawings Thread
I've created a gun sketch in Paint, so this is a full-auto handgun, with a clip on top of the gun (Side view). It doesn't have a name yet.
You do not have the required permissions to view the files attached to this post.
-
-
- Posts: 16891
- Joined: Tue Oct 02, 2012 2:20 am
- Location: An ancient Escape Shuttle(No longer active here anymore)
Re: [Concepts] The Sometimes-Serious-Concept-Drawings Thread
That gun resembles some unique design. Now what we need for this gun is improvement.
-
- Posts: 653
- Joined: Tue Jun 12, 2012 10:24 am
- Location: South Lake Hills
Re: [Concepts] The Sometimes-Serious-Concept-Drawings Thread
How in the world does that work?Oberron wrote:I've created a gun sketch in Paint, so this is a full-auto handgun, with a clip on top of the gun (Side view). It doesn't have a name yet.
Some guns. I drew three but the top one's the one I wanna talk about. It's a local made automatic rifle, chambered for 5.56/.223, takes STANAG magazines. It's a handy rifle, although it's less reliable than your average military rifle. The barrels are scavenged from existing .223 rifles, the available tooling isn't precise enough to create a decent barrel. Has an adjustable gas block, considered a standard feature in most of the craft rifles, since the craft made ammo tends to not be the the most reliable.
-
- Posts: 1048
- Joined: Sun Aug 02, 2015 1:20 am
- Graphics Processor: ATI/AMD (Modern GZDoom)
- Location: Czech Republic
Re: [Concepts] The Sometimes-Serious-Concept-Drawings Thread
Also, how does it work? You press the magazine release button and it releases the magazine, and you insert a new one.
-
-
- Posts: 16891
- Joined: Tue Oct 02, 2012 2:20 am
- Location: An ancient Escape Shuttle(No longer active here anymore)
Re: [Concepts] The Sometimes-Serious-Concept-Drawings Thread
It works just the same as existing Assault rifle, i guess?
-
- ... in rememberance ...
- Posts: 2121
- Joined: Tue Oct 19, 2010 7:01 am
- Location: Window office.
-
-
- Posts: 16891
- Joined: Tue Oct 02, 2012 2:20 am
- Location: An ancient Escape Shuttle(No longer active here anymore)
Re: [Concepts] The Sometimes-Serious-Concept-Drawings Thread
Don't tell me, the next scene would be gushing robot tentacles out his arm like akira?
-
- Posts: 186
- Joined: Sun Nov 01, 2015 6:50 pm
Re: [Concepts] The Sometimes-Serious-Concept-Drawings Thread
Big freakin' 20mm autocannon for big pseudo-mechas a la Evangelion from an alternate 1928. For those who care about how it would work, it's a short stroke piston action with a conventional double stack 30 round magazine. The charging handle is reciprocating and it does not have any sort of bolt hold open on an empty magazine. It's intended to be a general purpose weapon, and though it has a rifled barrel, it can use a few different ammo types (no minemgeschoss though).
Done in MS Paint.
Done in MS Paint.
-
- Posts: 1556
- Joined: Mon Jul 08, 2013 10:08 pm
Re: [Concepts] The Sometimes-Serious-Concept-Drawings Thread
20mm seems kinda small for something you're describing as an Evangelion-like pseudo-mecha - I assume it's nowhere near as large as one?Deii wrote:Big freakin' 20mm autocannon for big pseudo-mechas a la Evangelion from an alternate 1928. For those who care about how it would work, it's a short stroke piston action with a conventional double stack 30 round magazine. The charging handle is reciprocating and it does not have any sort of bolt hold open on an empty magazine. It's intended to be a general purpose weapon, and though it has a rifled barrel, it can use a few different ammo types (no minemgeschoss though).
Done in MS Paint.
-
- Posts: 186
- Joined: Sun Nov 01, 2015 6:50 pm
Re: [Concepts] The Sometimes-Serious-Concept-Drawings Thread
Nope, if I recall correctly an Evangelion is around 60 meters tall - the ones that would use this wouldn't pass 18-20 meters in height and would be somewhat similar to Muv-Luv's MiG-21 Balalaika in overall design and performance (minus being flight capable).TheRailgunner wrote:20mm seems kinda small for something you're describing as an Evangelion-like pseudo-mecha - I assume it's nowhere near as large as one?Deii wrote: [big bootleg G3]
Spoiler:I used the Evangelion-like bit just to signal the fact that they're actually giant flesh golems contained within armor that use appropriately sized weapons and are controlled by having a pilot psychically synchronize with them. Since they're going up against regular foes roughly on par with 1940s militaries, they're more than OP - specially considering the fact they're well armored and still manage to be agile enough to sprint like a human. Oh, and they can scream too.
...I like to call them baby vanjalions.
-
- ... in rememberance ...
- Posts: 2121
- Joined: Tue Oct 19, 2010 7:01 am
- Location: Window office.
Re: [Concepts] The Sometimes-Serious-Concept-Drawings Thread
Spoiler: Shik-ka-PMMMF
-
- Posts: 1556
- Joined: Mon Jul 08, 2013 10:08 pm
Re: [Concepts] The Sometimes-Serious-Concept-Drawings Thread
So, this thing is a railgun revolver, mostly because shooty guns - the Lemniscate Series, Model "A":
It has eight spitzer rounds, a decently large glass battery in the center of the cylinder (glass batteries are, by far, shaping up to be more capable than previous designs of battery in just about every way, particularly charge transfer rate and potential user hazard - they may also have higher charge capacity, which would be preferable with regards to firing eight bullets accurately up to somewhere around 100 to 200 meters), and an inline trigger-barrel axis similar to that of the Vector/Kross submachine gun. It is reloaded via a break-open latch on the top released by a button on the lower right of the cylinder mount, as opposed to the swing-out cylinder employed by most modern revolvers - this is because the magazine's outer rim is too large to swing out comfortably, as well as removing the additional parts and potential open space around the cylinder and barrel assembly, allowing a more rigid construction that can withstand the stress of a railgun's operation. The mag holds an inner ring containing the bullets that rotates independently while the outer rim remains stationary.
The cocking lever is really more of a vestigiality - as the glass battery also rotates the cylinder after firing, its only function is to manually rotate in the event that, for whatever reason, there are empty spaces between rounds, and thus doesn't need to be engaged in order to fire immediately after reloading. It can, however, be used as an auditory cue (a signal that, well, you're about to shoot, for whatever reason).
I felt like including automatic fire as an option; while there isn't really a practical reason for it, it seems like something that could be easily achieved, more or less just programming or even something that could be incorporated into the basic circuitry itself as opposed to the significant amount of machinery it takes to create an automatic firearm.
Obviously, it wouldn't be much more powerful than contemporary revolvers and handguns (if at all), but I think such a design could realistically produced at least in the next ten to fifteen years (if not much sooner).
It has eight spitzer rounds, a decently large glass battery in the center of the cylinder (glass batteries are, by far, shaping up to be more capable than previous designs of battery in just about every way, particularly charge transfer rate and potential user hazard - they may also have higher charge capacity, which would be preferable with regards to firing eight bullets accurately up to somewhere around 100 to 200 meters), and an inline trigger-barrel axis similar to that of the Vector/Kross submachine gun. It is reloaded via a break-open latch on the top released by a button on the lower right of the cylinder mount, as opposed to the swing-out cylinder employed by most modern revolvers - this is because the magazine's outer rim is too large to swing out comfortably, as well as removing the additional parts and potential open space around the cylinder and barrel assembly, allowing a more rigid construction that can withstand the stress of a railgun's operation. The mag holds an inner ring containing the bullets that rotates independently while the outer rim remains stationary.
The cocking lever is really more of a vestigiality - as the glass battery also rotates the cylinder after firing, its only function is to manually rotate in the event that, for whatever reason, there are empty spaces between rounds, and thus doesn't need to be engaged in order to fire immediately after reloading. It can, however, be used as an auditory cue (a signal that, well, you're about to shoot, for whatever reason).
I felt like including automatic fire as an option; while there isn't really a practical reason for it, it seems like something that could be easily achieved, more or less just programming or even something that could be incorporated into the basic circuitry itself as opposed to the significant amount of machinery it takes to create an automatic firearm.
Obviously, it wouldn't be much more powerful than contemporary revolvers and handguns (if at all), but I think such a design could realistically produced at least in the next ten to fifteen years (if not much sooner).
-
-
- Posts: 16891
- Joined: Tue Oct 02, 2012 2:20 am
- Location: An ancient Escape Shuttle(No longer active here anymore)
Re: [Concepts] The Sometimes-Serious-Concept-Drawings Thread
Gotta, really gotta love the cylinder's patterns!
-
- Posts: 186
- Joined: Sun Nov 01, 2015 6:50 pm
Re: [Concepts] The Sometimes-Serious-Concept-Drawings Thread
That's pretty good but the overall shape of the cylinder bugs me a little bit (the norm is that cylinders don't taper towards the projectile of the round they're containing, it seems) but I quite like the idea too.
-
- Posts: 1556
- Joined: Mon Jul 08, 2013 10:08 pm
Re: [Concepts] The Sometimes-Serious-Concept-Drawings Thread
It's because the actual cylinder ends before the taper - the magazine containing the battery and projectiles is separate from the "cylinder", which is fixed to the frame of the weapon. The magazine itself is also fixed, as the only moving part is the bullet ring inside - think of it like a moon clip you leave in the gun when you load it. The cylinder is relatively short because it contains no casing or propellant apart from the centralized battery (relatively being the key word - spitzer rounds are generally longer - for example, a .308/7.62x51mm bullet is similar in length to a 9mm cartridge, bullet, casing, and all).Deii wrote:That's pretty good but the overall shape of the cylinder bugs me a little bit (the norm is that cylinders don't taper towards the projectile of the round they're containing, it seems) but I quite like the idea too.
The taper is, for the most part, where the beginning of the barrel assembly is.