[SPRITES] Spriting Carnival!!
- Sgt. Shivers
- Posts: 1743
- Joined: Fri Jun 22, 2012 5:39 am
Re: [SPRITES] Spriting Carnival!!
Lookin good Carbine, just add some highlights and a touch of colour and it'll look great!
- Carbine Dioxide
- Posts: 1927
- Joined: Thu Jun 12, 2014 3:16 pm
- Location: Anywhere.
Re: [SPRITES] Spriting Carnival!!
Something like this? Tried adding some scratches too.
- Attachments
-
- SHADING PROTO.png (5.13 KiB) Viewed 1293 times
- Captain J
-
- Posts: 16890
- Joined: Tue Oct 02, 2012 2:20 am
- Location: An ancient Escape Shuttle(No longer active here anymore)
- Contact:
Re: [SPRITES] Spriting Carnival!!
seems that cylinder got attached to the gun.
- Slax
- ... in rememberance ...
- Posts: 2121
- Joined: Tue Oct 19, 2010 7:01 am
- Location: Window office.
- Contact:
Re: [SPRITES] Spriting Carnival!!
Here's something for you, Carbine.
https://www.youtube.com/watch?v=YwHNOdDjxak
Guns. How do they work?!
https://www.youtube.com/watch?v=YwHNOdDjxak
Guns. How do they work?!
- Carbine Dioxide
- Posts: 1927
- Joined: Thu Jun 12, 2014 3:16 pm
- Location: Anywhere.
Re: [SPRITES] Spriting Carnival!!
Crap, I forgot about the cylinder!
Moved it a little, is this better? I tried following Doom Nukem's tutorial.
Moved it a little, is this better? I tried following Doom Nukem's tutorial.
- Attachments
-
- PROTO SHADE.png (5.48 KiB) Viewed 1046 times
- MarlboroMike2100
- Posts: 144
- Joined: Sun May 22, 2011 4:55 am
- Location: Somewheres in PA.
Re: [SPRITES] Spriting Carnival!!
Ok day and a half worth of work. Not sure why but felt like making a modernized trench shotgun.
if used give credit, if edited co credit.
if used give credit, if edited co credit.
Re: [SPRITES] Spriting Carnival!!
Much better. but let's start with a scratch. Here's 1940's colt revolver.Carbine Dioxide wrote:Crap, I forgot about the cylinder!
Moved it a little, is this better? I tried following Doom Nukem's tutorial.
See anything missing on your single sprite you, so desperately cling to?
Well, it is missing good chunk of the back side, iron sight is kinda weird, and is it me or revolver is undersized (hand feels kinda small)
Let's try it against this model i made a few years ago:
First thing first - let's check where hand should reside (basing on original sprite i end up with this position)
Now, setup camera to 75 degrees fov, adjust position of thegun in the scene to match hand position:
You can already see adjusted hand grip matching up with gun. but this render is a no-go, because nothing is setup properly. First, let's adjust lighting to match stock doom lighting on pistol:
Nothng special. But still requires some adjustments on the scene. Dim enviromental skylight and add designated lightsources. While at it - turn off any aliasing completely to produce hard edged picture and also play with materials to add doom pistols oily gun metal (which in original were phong/glance plastic toy they used for sprites, but it looks simmilar)
This is what i end up with.
Rest is just as i described before - check jagged edges, adjust color, keep it simple first and complex later, additionally it needs small green'ish lit from the top (probably partial light reflection by doomguy's armor).
This is what i end up with (after few adjustments, applying doom palette with 25% diffusion dithering)
But wait, there is more! Edit hand to properly reflect grip.
- Carbine Dioxide
- Posts: 1927
- Joined: Thu Jun 12, 2014 3:16 pm
- Location: Anywhere.
Re: [SPRITES] Spriting Carnival!!
I like yours, but It doesn't have that Eriance style I have been looking for. I cling on to it because I cant perspective. The base was actually made by Torrid Gristle if you didn't know.
The gun is based off of this too.
The gun is based off of this too.
- YukiHerz
- Global Moderator
- Posts: 1503
- Joined: Mon Dec 02, 2013 6:01 pm
- Graphics Processor: Intel (Modern GZDoom)
- Location: Where corruption is redefined daily.
Re: [SPRITES] Spriting Carnival!!
I have this if you'd like to use it as a reference.
- Carbine Dioxide
- Posts: 1927
- Joined: Thu Jun 12, 2014 3:16 pm
- Location: Anywhere.
Re: [SPRITES] Spriting Carnival!!
I think I will hold off on custom spriting for while. Here is a very messy screenshot rip.
- Attachments
-
- SGRIP.png (13.53 KiB) Viewed 904 times
- raymoohawk
- Posts: 1153
- Joined: Fri Jan 17, 2014 7:16 pm
Re: [SPRITES] Spriting Carnival!!
i tried editing one of marlboros sprite, it didnt go as i hoped
- Captain J
-
- Posts: 16890
- Joined: Tue Oct 02, 2012 2:20 am
- Location: An ancient Escape Shuttle(No longer active here anymore)
- Contact:
Re: [SPRITES] Spriting Carnival!!
cocking frames seems shorty bitsy than idle one, through.MarlboroMike2100 wrote:Ok day and a half worth of work. Not sure why but felt like making a modernized trench shotgun.
if used give credit, if edited co credit.
- zrrion the insect
- Posts: 2411
- Joined: Thu Jun 25, 2009 1:58 pm
- Location: Time Station 1: Moon of Glendale
Re: [SPRITES] Spriting Carnival!!
That's pretty good! While like it. (The base is also a good sprite.)raymoohawk wrote:i tried editing one of marlboros sprite, it didnt go as i hoped
- jdredalert
- Posts: 1668
- Joined: Sat Jul 13, 2013 10:13 pm
- Contact:
Re: [SPRITES] Spriting Carnival!!
smoke_th wrote: nice and friendly tutorial
I liked that, smoke! Although i'm not a sprite artist myself, i think i've just learned one thing or two.
- raymoohawk
- Posts: 1153
- Joined: Fri Jan 17, 2014 7:16 pm
Re: [SPRITES] Spriting Carnival!!
tapwaev, you can grab the idividual frames of the tentacled monster from this wad that fraggle put together, however the animation needs a lot of correction from some angles, so you may want to wait until i improve it
https://soulsphere.org/random/rmhserp.wad
https://soulsphere.org/random/rmhserp.wad