[SPRITES] Spriting Carnival!!
-
- Posts: 73
- Joined: Mon Apr 19, 2021 12:58 pm
Re: [SPRITES] Spriting Carnival!!
Might as well add the very basic spriting I did for akimbo super shotguns for a mod I released recently. Still kinda crude but it's a start at least.
The flash state shown is just a tiny taste of the utter madness that was spriting up flash states. See, I'd went with the idea of the shotguns letting you fire one barrel at a time by default, with altfire firing both barrels. Simple enough, just have primary fire fire off the left barrel, then the right barrel if it's your second shot before reloading, and altfire is the same old flash sprites the super shotgun uses normally.
So having two shotguns makes it more complicated. Four barrels, so that's four separate muzzle flash positions, and two sprites for each. Then, of course, you can still touch off two barrels at a time for the altfire. It can be done from 2 chambers loaded up to all 4 loaded, so that's three more pairs of flash sprites based on which specific barrels are used (the two on the left shotgun, one from each, or the two on the right depending on chambers available).
I think I have a grand total of 20 flash state sprites, hence why I've yet to dabble with adding distinct muzzle flash effects for incendiary or plasma shells since each will need 20 more that I'd have to edit together AND tweak until I have the offsets exactly right. XD
The flash state shown is just a tiny taste of the utter madness that was spriting up flash states. See, I'd went with the idea of the shotguns letting you fire one barrel at a time by default, with altfire firing both barrels. Simple enough, just have primary fire fire off the left barrel, then the right barrel if it's your second shot before reloading, and altfire is the same old flash sprites the super shotgun uses normally.
So having two shotguns makes it more complicated. Four barrels, so that's four separate muzzle flash positions, and two sprites for each. Then, of course, you can still touch off two barrels at a time for the altfire. It can be done from 2 chambers loaded up to all 4 loaded, so that's three more pairs of flash sprites based on which specific barrels are used (the two on the left shotgun, one from each, or the two on the right depending on chambers available).
I think I have a grand total of 20 flash state sprites, hence why I've yet to dabble with adding distinct muzzle flash effects for incendiary or plasma shells since each will need 20 more that I'd have to edit together AND tweak until I have the offsets exactly right. XD
You do not have the required permissions to view the files attached to this post.
-
- Posts: 223
- Joined: Sun Nov 03, 2019 6:01 am
Re: [SPRITES] Spriting Carnival!!
It would PROBABLY have been a better idea to use some Angled SSG sprites that both NTMAI and Angled Doom used instead of doing something that will make you lose your mind.
-
- Posts: 705
- Joined: Tue Jul 15, 2003 5:15 pm
- Location: misplaced
Re: [SPRITES] Spriting Carnival!!
I would have thought handling just one shot gun was hard enough, but I suppose someone strong enough to carry 100 rockets and survive getting hit by one of them has skills that I don't understand (except possibly when wielding a sledgehammer).
I like the idea of the zombie blood splotches walking around on their own, sort of like a mixture of the particle soldiers from Obituary and Dr. Manhattan between existences, or possibly a very orderly poltergeist with an odd sense of humor.
I like the idea of the zombie blood splotches walking around on their own, sort of like a mixture of the particle soldiers from Obituary and Dr. Manhattan between existences, or possibly a very orderly poltergeist with an odd sense of humor.
-
- Posts: 73
- Joined: Mon Apr 19, 2021 12:58 pm
Re: [SPRITES] Spriting Carnival!!
I didn't think to look for a good source besides editing vanilla, yeah. ;~;DOOMPiter wrote:It would PROBABLY have been a better idea to use some Angled SSG sprites that both NTMAI and Angled Doom used instead of doing something that will make you lose your mind.
At least in this case you won't be carrying 7 guns and a chainsaw at once, just up to 2 guns.bimshwel wrote:I would have thought handling just one shot gun was hard enough, but I suppose someone strong enough to carry 100 rockets and survive getting hit by one of them has skills that I don't understand (except possibly when wielding a sledgehammer).
-
- Posts: 705
- Joined: Tue Jul 15, 2003 5:15 pm
- Location: misplaced
Re: [SPRITES] Spriting Carnival!!
Sure, but I imagined the protagonist was the same marine who had up until recently been carrying 7 or 8 or so guns and a chainsaw!
-
- Posts: 73
- Joined: Mon Apr 19, 2021 12:58 pm
Re: [SPRITES] Spriting Carnival!!
Probably, no custom player sprites or what-have-you yet so there's no defined character to the mod like with High Noon Drifter or other yeehaw-flavored mods yet. Though since this is compatible with Chex Quest and Heretic that means you're either a shotgun-toting space marine, shotgun-toting cereal person, or shotgun-toting elf depending on IWAD...bimshwel wrote:Sure, but I imagined the protagonist was the same marine who had up until recently been carrying 7 or 8 or so guns and a chainsaw!
-
- Posts: 223
- Joined: Sun Nov 03, 2019 6:01 am
Re: [SPRITES] Spriting Carnival!!
A frankensprite i made specifically for Buckshootin' Season, but i decided to release the full sheet out of kindness, have at it and don't forget to credit if used!
(Credits: Super Piter/DoomPiter, Amuscaria, Apogee)You do not have the required permissions to view the files attached to this post.
-
- Posts: 73
- Joined: Mon Apr 19, 2021 12:58 pm
Re: [SPRITES] Spriting Carnival!!
So I looked into Angled Doom's sprites and edited up some potential replacements to my janky edits I posted back at the top of the page. Some examples:
I'm still not 100% sure which I'd rather use, my janky rotations that give the impression of being canted off-center but are a bit blurred, or the Angled Doom sprites that don't seem to have any details eaten by GIMP but do look slightly odd due to the top being still more or less level.
I'm still not 100% sure which I'd rather use, my janky rotations that give the impression of being canted off-center but are a bit blurred, or the Angled Doom sprites that don't seem to have any details eaten by GIMP but do look slightly odd due to the top being still more or less level.
You do not have the required permissions to view the files attached to this post.
-
- Posts: 7402
- Joined: Fri Oct 22, 2004 9:22 am
- Graphics Processor: nVidia with Vulkan support
- Location: MAP33
Re: [SPRITES] Spriting Carnival!!
Tried making widescreen-friendly Witchaven HUD sprites, quickly realized why it hasn't been done yet.
-
- Posts: 223
- Joined: Sun Nov 03, 2019 6:01 am
Re: [SPRITES] Spriting Carnival!!
Huh. That's a... weirdly unexpected bit of widescreen-editing right there, Kinsie. But i don't think Civvie's interested in checking Witchaven a second time either. so... ¯\_(ツ)_/¯
-
- Posts: 272
- Joined: Sat Dec 12, 2020 10:59 am
- Preferred Pronouns: He/Him
- Operating System Version (Optional): Void Linux
- Graphics Processor: Intel (Modern GZDoom)
- Location: Independence, KS, USA
Re: [SPRITES] Spriting Carnival!!
The Witchaven sprites were chroma-keyed photographs done with props and a costume were they? Making some of those wide-screen friendly does tend to make the arm positioning look very awkward as-is.Kinsie wrote:Tried making widescreen-friendly Witchaven HUD sprites, quickly realized why it hasn't been done yet.
-
- Posts: 7402
- Joined: Fri Oct 22, 2004 9:22 am
- Graphics Processor: nVidia with Vulkan support
- Location: MAP33
Re: [SPRITES] Spriting Carnival!!
dear lord please let someone who knows what they're doing take over
-
- Posts: 1748
- Joined: Fri Sep 23, 2005 9:17 am
- Location: Czech Republic
Re: [SPRITES] Spriting Carnival!!
Looks like you are doing fine so far
-
- Posts: 107
- Joined: Sun Apr 12, 2015 9:05 pm
- Location: USA
Re: [SPRITES] Spriting Carnival!!
Nice Revolver Ocelot sprites.Kinsie wrote:
dear lord please let someone who knows what they're doing take over
-
- Posts: 198
- Joined: Fri Sep 11, 2020 8:09 pm
- Location: United States
Re: [SPRITES] Spriting Carnival!!
Crusader Queen 2nd phase death. Crushed by her own machinery.
You do not have the required permissions to view the files attached to this post.