"Execution could not continue" - Your ZDoom may be too old!
Moderator: GZDoom Developers
Forum rules
Contrary to popular belief, we are not all-knowing-all-seeing magical beings!
If you want help you're going to have to provide lots of info. Like what is your hardware, what is your operating system, what version of GZDoom/LZDoom/whatever you're using, what mods you're loading, how you're loading it, what you've already tried for fixing the problem, and anything else that is even remotely relevant to the problem.
We can't magically figure out what it is if you're going to be vague, and if we feel like you're just wasting our time with guessing games we will act like that's what you're really doing and won't help you.
Contrary to popular belief, we are not all-knowing-all-seeing magical beings!
If you want help you're going to have to provide lots of info. Like what is your hardware, what is your operating system, what version of GZDoom/LZDoom/whatever you're using, what mods you're loading, how you're loading it, what you've already tried for fixing the problem, and anything else that is even remotely relevant to the problem.
We can't magically figure out what it is if you're going to be vague, and if we feel like you're just wasting our time with guessing games we will act like that's what you're really doing and won't help you.
-
- Lead GZDoom+Raze Developer
- Posts: 49182
- Joined: Sat Jul 19, 2003 10:19 am
- Location: Germany
Re: "Execution could not continue" - Your ZDoom may be too o
These days the only valid reasons to use devbuilds are:
1. You want to test your mod with upcoming code changes.
2. Your mod depends on some bugfix / new feature that hasn't been released yet (but then you shouldn't release your mod before the required features become official.)
3. You want to act as a beta tester to give feedback to the developers
Under no circumstances should devbuilds be used for a mod release! There is absolutely no guarantee that any devbuild feature may survive unaltered until the next release. Unless some code ends up in an official release it may be removed or altered without notice. It's really too bad that ZDoom's extremely spotty release schedule basically forced people to ignore any common sense regarding beta-quality code.
Regarding current GZDoom, the last official release is roughly 2 months old by now, and the next one is very close to being published. 2017 has seen 10 new releases of GZDoom so there should really be no need to resort to devbuilds anymore.
1. You want to test your mod with upcoming code changes.
2. Your mod depends on some bugfix / new feature that hasn't been released yet (but then you shouldn't release your mod before the required features become official.)
3. You want to act as a beta tester to give feedback to the developers
Under no circumstances should devbuilds be used for a mod release! There is absolutely no guarantee that any devbuild feature may survive unaltered until the next release. Unless some code ends up in an official release it may be removed or altered without notice. It's really too bad that ZDoom's extremely spotty release schedule basically forced people to ignore any common sense regarding beta-quality code.
Regarding current GZDoom, the last official release is roughly 2 months old by now, and the next one is very close to being published. 2017 has seen 10 new releases of GZDoom so there should really be no need to resort to devbuilds anymore.
-
- Posts: 21706
- Joined: Tue Jul 15, 2003 7:33 pm
- Preferred Pronouns: He/Him
- Operating System Version (Optional): A lot of them
- Graphics Processor: Not Listed
Re: "Execution could not continue" - Your ZDoom may be too o
The intent of the OP is still true, however: if you're getting "Execution could not continue" messages, you should make sure you're not running an old version of (G)ZDoom.
-
-
- Posts: 12328
- Joined: Tue Jul 21, 2009 12:04 pm
- Preferred Pronouns: He/Him
- Operating System Version (Optional): Windows 11
- Graphics Processor: nVidia with Vulkan support
- Location: capital N, capital S, no space
Re: "Execution could not continue" - Your ZDoom may be too o
... Yeah, the last time I updated it was after the switch from SVN to git, and the ensuing rename of the DRD builds page. I'd pretty much forgotten about it since then. (Largely because it didn't appear to help much even when that information was still valid.)
I'll see if I can whip up something more up-to-date (and concise). I'd say this thread should be retired, but I think folks could use the reminder.
I'll see if I can whip up something more up-to-date (and concise). I'd say this thread should be retired, but I think folks could use the reminder.
-
-
- Posts: 12328
- Joined: Tue Jul 21, 2009 12:04 pm
- Preferred Pronouns: He/Him
- Operating System Version (Optional): Windows 11
- Graphics Processor: nVidia with Vulkan support
- Location: capital N, capital S, no space
Re: "Execution could not continue" - Your ZDoom may be too o
Okay, having this hard-linked from the top of the forum has finally kicked my terrible memory into updating it.
Now more concise and up-to-date. Now with in-line links! [citation needed]
Now more concise and up-to-date. Now with in-line links! [citation needed]
-
- Posts: 95
- Joined: Wed May 26, 2010 11:10 am
Re: "Execution could not continue" - Your ZDoom may be too o
I've downloaded the newest version of GZDoom, it seems to work very well but for some reason the whole config file is messed up, everything is just written without any paragraphs and makes it very hard to navigate. You know, the .ini file where you can set autoload paths for your wads and stuff. Is it normal? I tried manually adjusting the text to make it formated just like it would be normally, but after starting up GZDoom again, everything just got messed up again.
(Also my apologies if this is not the right place to ask this)
(Also my apologies if this is not the right place to ask this)
-
- Posts: 2119
- Joined: Thu May 02, 2013 1:27 am
- Operating System Version (Optional): Windows 10
- Graphics Processor: nVidia with Vulkan support
- Location: Brazil
Re: "Execution could not continue" - Your ZDoom may be too o
That's because it's using LF line-endings instead of CRLF. Notepad only got support for non-CRLF line endings in a recent Windows 10 update. You have to either use some other text editor, or Windows 10 with the latest feature update installed.
-
- Posts: 72
- Joined: Sat Feb 23, 2019 6:11 am
Re: "Execution could not continue" - Your ZDoom may be too o
I tried getting Cult's Arsenal 1.7 to work with GZDoom but it refuses to start up even with the latest versions. I wrote about this on the Cult's Arsenal thread and decided to copy paste what I said there here:
"I tried loading up this mod with the latest versions of ZDoom and GZDoom And got an error message stating "Script error, "CultsArsenal_v1.7.pk3:actors/wand.txt" line 22: Sprite names must be exactly 4 characters" What is this about? is there any way I can troubleshoot this issue? Cult's Arsenal looks like a amazing mod and I don't wanna miss out"
I have a feeling that this is just an issue with the mod itself and not with GZDoom but I just wanted to hear what you guys think on the matter.
"I tried loading up this mod with the latest versions of ZDoom and GZDoom And got an error message stating "Script error, "CultsArsenal_v1.7.pk3:actors/wand.txt" line 22: Sprite names must be exactly 4 characters" What is this about? is there any way I can troubleshoot this issue? Cult's Arsenal looks like a amazing mod and I don't wanna miss out"
I have a feeling that this is just an issue with the mod itself and not with GZDoom but I just wanted to hear what you guys think on the matter.
-
- Lead GZDoom+Raze Developer
- Posts: 49182
- Joined: Sat Jul 19, 2003 10:19 am
- Location: Germany
Re: "Execution could not continue" - Your ZDoom may be too o
What's the content of the offending line?
-
- Posts: 72
- Joined: Sat Feb 23, 2019 6:11 am
Re: "Execution could not continue" - Your ZDoom may be too o
I hope I don't sound dumb or annoying when I say this, but I can't find the offending line. There doesn't seem to be any numbering that shows what line is what and the layout of wand.txt is quite confusing (I am not good with programming) So would it help if I just cut and pasted screen grabs of the text here?
Here it is just in case:
Here it is just in case:
You do not have the required permissions to view the files attached to this post.
-
- Posts: 1287
- Joined: Fri Nov 07, 2008 3:29 pm
- Graphics Processor: ATI/AMD with Vulkan/Metal Support
- Location: Maryland, USA, but probably also in someone's mod somewhere
Re: "Execution could not continue" - Your ZDoom may be too o
The offending lines in question are the frames using sprite names with numbers in them ("FX01"). This probably worked before the inclusion of the ZScript compiler, but it's a clear mod bug...
-
- Posts: 2119
- Joined: Thu May 02, 2013 1:27 am
- Operating System Version (Optional): Windows 10
- Graphics Processor: nVidia with Vulkan support
- Location: Brazil
Re: "Execution could not continue" - Your ZDoom may be too o
No. That was never a bug. That sprite is from Heretic itself. The problem is the semicolon on line 22* or so.Zhs2 wrote:The offending lines in question are the frames using sprite names with numbers in them ("FX01"). This probably worked before the inclusion of the ZScript compiler, but it's a clear mod bug...
I really recommend using a better text editor like Sublime Text, Notepad++ or Notepad2. That way, you'll have line numbers in the editor.
(* I believe. Counting lines in a screenshot is surprisingly hard)
-
- Posts: 1287
- Joined: Fri Nov 07, 2008 3:29 pm
- Graphics Processor: ATI/AMD with Vulkan/Metal Support
- Location: Maryland, USA, but probably also in someone's mod somewhere
Re: "Execution could not continue" - Your ZDoom may be too o
Oops. The line with the first instance of sprite name FX01 does happen to be the only line with the semicolon at the end...
-
-
- Posts: 17934
- Joined: Fri Jul 06, 2007 3:22 pm
Re: "Execution could not continue" - Your ZDoom may be too o
What happens is that after the losing parenthesis, the DECORATE parser expects a new state definition to start since it has finished the current one, gets a token that's just one-character-long (";") and complains that it wants a token that's four-character-long.
Perhaps the error message could show the token that caused the error.
Perhaps the error message could show the token that caused the error.
-
- Posts: 72
- Joined: Sat Feb 23, 2019 6:11 am
Re: "Execution could not continue" - Your ZDoom may be too o
Is there any way to fix the error? I mean all I would have to do is correct the error in the offending line right?
-
- Posts: 21706
- Joined: Tue Jul 15, 2003 7:33 pm
- Preferred Pronouns: He/Him
- Operating System Version (Optional): A lot of them
- Graphics Processor: Not Listed
Re: "Execution could not continue" - Your ZDoom may be too o
Yes - remove the semicolon on that line and it should work fine, as I understand.thewolfman00001 wrote:Is there any way to fix the error? I mean all I would have to do is correct the error in the offending line right?