Re: PSX Quake 2 project (QuakeW)

Mon Jan 16, 2012 1:01 pm

And why would you want to extract it? It is supposed to be played, but well, nevermind.

Re: PSX Quake 2 project (QuakeW)

Tue Feb 14, 2012 1:27 pm

Bump! Just so you notice that a new version is up, so you might want to check the first post.

Re: PSX Quake 2 project (QuakeW)

Wed Feb 15, 2012 7:16 am

tested, not working in gzdoom (fatal error) and have a problem in skulltag =/

Re: PSX Quake 2 project (QuakeW)

Wed Feb 15, 2012 1:01 pm

Honestly, bro? Try to stick to Skulltag. Right, GZDoom is great and all, but the problem is: No OpenGL, No Graphics Card, No Service. Meanwhile, Skulltag welcomes both. And the version 98e features 3D Floors, what I bet you are using. Effects? With a lot of patience, trial and error, you can get many effects to come out well.

If you want to keep going for GZDoom, go ahead.

Re: PSX Quake 2 project (QuakeW)

Wed Feb 15, 2012 1:25 pm

Um, Skulltag's OpenGl mode is based on GZDoom, I'm pretty sure...

Although if it's for multiplayer then yeah Skulltag is your best option. I think it's getting 3d floor support but I've been away from there so long I couldn't tell you for certain.

Re: PSX Quake 2 project (QuakeW)

Wed Feb 15, 2012 2:05 pm

ibm5155 wrote:tested, not working in gzdoom (fatal error) and have a problem in skulltag =/

Weird... what version of GZDoom are you using? It runs fine on GZDoom 1.5.6. Also, don't try Skulltag, as it is way outdated, and won't support any of the features the weapons have.
tsukiyomaru0 wrote:Honestly, bro? Try to stick to Skulltag. Right, GZDoom is great and all, but the problem is: No OpenGL, No Graphics Card, No Service. Meanwhile, Skulltag welcomes both. And the version 98e features 3D Floors, what I bet you are using. Effects? With a lot of patience, trial and error, you can get many effects to come out well.

If you want to keep going for GZDoom, go ahead.

Can't tell if trolling, or just outrageosly ignorant.
In case of troll, go away, the Off-Topic forum isn't here.
In case of ignorant, I will TRY and cure yours. Skulltag doesn't allow 3D floors while playing multiplayer, so, what's the point? Also, you obviously cannot tell that Skulltag is based on an ANCIENT version of ZDoom (2.3.1). This of course makes Skulltag horribly crippled compared to GZDoom (which is based on ZDoom 2.5.0 (r3010)), not to mention the mediocre renderer Skulltag uses for OpenGL. Sure, you can say you get the same effects by trial and error, but you obviously haven't tried even once. If you want to keep using a mediocre port like Skulltag, go ahead and try redoing all this for Skulltag. I guarantee 100% failure.

Re: PSX Quake 2 project (QuakeW)

Sat Feb 18, 2012 10:51 pm

hfc2x wrote:
tsukiyomaru0 wrote:Honestly, bro? Try to stick to Skulltag. Right, GZDoom is great and all, but the problem is: No OpenGL, No Graphics Card, No Service. Meanwhile, Skulltag welcomes both. And the version 98e features 3D Floors, what I bet you are using. Effects? With a lot of patience, trial and error, you can get many effects to come out well.

If you want to keep going for GZDoom, go ahead.

Can't tell if trolling, or just outrageosly ignorant.
In case of troll, go away, the Off-Topic forum isn't here.
In case of ignorant, I will TRY and cure yours. Skulltag doesn't allow 3D floors while playing multiplayer, so, what's the point? Also, you obviously cannot tell that Skulltag is based on an ANCIENT version of ZDoom (2.3.1). This of course makes Skulltag horribly crippled compared to GZDoom (which is based on ZDoom 2.5.0 (r3010)), not to mention the mediocre renderer Skulltag uses for OpenGL. Sure, you can say you get the same effects by trial and error, but you obviously haven't tried even once. If you want to keep using a mediocre port like Skulltag, go ahead and try redoing all this for Skulltag. I guarantee 100% failure.

Now I'm SURE you haven't laid your hands on Skulltag 98e. Specially considering it isn't "stable" yet (or so they say, but who am I to judge? I can only play 98e in MM8BDM servers ¬¬).
Skulltag, as of 98e, supports 3D floors for both Hardware (OpenGL) and Software (Direct X/3D, dunno which) renderers. I do know because I have played in maps with 3D floors with this version and it works fine.

So, turns out, you were the misinformed one

.

PS.: No, I'm not a troll. Just informing you the truth. I know of a great GZDoom mod that is, sadly, underplayed.

PSS.:No, you aren't ignorant. You are misinformed.

Re: PSX Quake 2 project (QuakeW)

Sat Feb 18, 2012 11:11 pm

tsukiyomaru0 wrote:Now I'm SURE you haven't laid your hands on Skulltag 98e. Specially considering it isn't "stable" yet (or so they say, but who am I to judge? I can only play 98e in MM8BDM servers ¬¬).
Skulltag, as of 98e, supports 3D floors for both Hardware (OpenGL) and Software (Direct X/3D, dunno which) renderers. I do know because I have played in maps with 3D floors with this version and it works fine.

So, turns out, you were the misinformed one


I noticed that when he said Skulltag doesn't support 3D Floors in Multiplayer (not competitive modes but still works in MP) and the Skulltag's OpenGL sucks.

If that was true, then, Hunter's Moon wasn't to be a "nice" OpenGL mod for ST, but well, who am i to judge his opinion about Skulltag :|

Re: PSX Quake 2 project (QuakeW)

Sun Feb 19, 2012 9:39 pm

tsukiyomaru0 wrote:So, turns out, you were the misinformed one

Revilution wrote:I noticed that when he said Skulltag doesn't support 3D Floors in Multiplayer (not competitive modes but still works in MP) and the Skulltag's OpenGL sucks.

1.- I never said Skulltag doesn't support 3D floors at all. I said that it doesn't support them in multiplayer, and by that I'm referring to competitive modes. Of course, it doesn't take a genius to notice that this mod is for competitive-play only. If you say that the rendering is great, then you clearly don't care about 32-bit textures being lowered to 16-colour paletted.
2.- Yes, I've "laid my hands" over Skulltag 98e, and (I don't care if it's updated and stuff) rendering still sucks and it doesn't launch because the features used for this mod are far too advanced for it's codebase.
3.- I don't really care if this mod is underplayed. I made it just for fun, so it's the same for me if 3 people or 1 million play it.

Re: PSX Quake 2 project (QuakeW)

Mon Feb 20, 2012 12:32 am

This looks interesting. I loved playing Quake 2 DM with my friends back in the 90's, I'm glad to see others that like the PSX level set.

Re: PSX Quake 2 project (QuakeW)

Mon Feb 20, 2012 7:25 pm

ignore the counterproductive engine preaching and move forward.


BROSKI U NEED TO USE RISEN3*shot*

Re: [Finished] PSX Quake 2 deathmatch maps and weapons

Mon Oct 20, 2014 7:19 pm

Bumping this thread so you know the first post has been updated, since this mod is finished. Please report any bug you find.

Re: [Finished] PSX Quake 2 deathmatch maps and weapons

Sat Nov 01, 2014 1:08 pm

I really liked this and i would like to make the weapon MD2s work with this.
Could someone help me on how the frames work/how the naming works?

Re: [Finished] PSX Quake 2 deathmatch maps and weapons

Sun Nov 02, 2014 8:54 pm

Matsilagi wrote:I really liked this and i would like to make the weapon MD2s work with this.
Could someone help me on how the frames work/how the naming works?

I don't understand MODELDEF all too well, so I'm not really sure if this would actually work. I know you need to associate each sprite frame to one model animation frame. The problem with this is that the way I made the sprites animate would break the model animations (I'm not 100% sure, since I haven't tried).

I took the frames directly from a model viewer, but picking the corresponding model animation frames would make the weapon animations look jerky, since models are interpolated in-game. Sprite animations are not, unless you provide extra frames in-between. So, I had to make and insert extra frames to make the animations look smooth. This will, of course, leave some model frames un-linked from their sprite counterparts, so I don't know what could the in-game consequences be.

Re: [Finished] PSX Quake 2 deathmatch maps and weapons

Fri Nov 28, 2014 5:52 pm

Why didnt you make the Doom64 weapons
since they are the only ones with muzzleflashes?