SLADE Discussion - Latest: v3.2.6 (28/May/2024)

Any utility that assists in the creation of mods, assets, etc, go here. For example: Ultimate Doom Builder, Slade, WadSmoosh, Oblige, etc.
Forum rules
The Projects forums are ONLY for YOUR PROJECTS! If you are asking questions about a project, either find that project's thread, or start a thread in the General section instead.

Got a cool project idea but nothing else? Put it in the project ideas thread instead!

Projects for any Doom-based engine (especially 3DGE) are perfectly acceptable here too.

Please read the full rules for more details.
User avatar
chronoteeth
Posts: 2664
Joined: Wed Sep 08, 2004 1:29 pm
Preferred Pronouns: It/Its

Re: SLADE3 beta (testing release, beta2 up)

Post by chronoteeth »

One curious question: Say I wanna make a map/weapon mod/monster thingy or whatever for another port besides zdoom. It'll still be fair game? Like this is a universal map editor, and if you wanna make a map for another port just gotta change the config?
User avatar
DoomRater
Posts: 8265
Joined: Wed Jul 28, 2004 8:21 am
Preferred Pronouns: He/Him
Location: WATR HQ

Re: SLADE3 beta (testing release, beta2 up)

Post by DoomRater »

A map editor that cannot edit anything BUT ZDoom maps is worthless IMO.
Gez
 
 
Posts: 17934
Joined: Fri Jul 06, 2007 3:22 pm

Re: SLADE3 beta (testing release, beta2 up)

Post by Gez »

There's nothing that forces you to only use ZDoom with whatever you create with Slade 3. If you make mods that can only be played in ZDoom, it'll be because you'll have chosen, by your own free will, to put ZDoom features in them.

As for the map editor part of Slade 3, there's nothing working right now anyway; just the lump management stuff (and even that is not entirely finished either). But support is planned for all three map formats -- Doom, Hexen, UDMF.
User avatar
sirjuddington
Posts: 1026
Joined: Wed Jul 16, 2003 4:47 am
Location: Australia

Re: SLADE3 beta (testing release, beta2 up)

Post by sirjuddington »

Yeah, I plan to make the map editor base as generic as possible to allow other ports' features to be implemented easily. Whether I add those features myself, though, well it depends if I get the time and have the motivation :P But yeah Doom/Hexen/UDMF formats are definitely going to be supported (will probably be internally stored as UDMF or something similar)
User avatar
randi
Site Admin
Posts: 7749
Joined: Wed Jul 09, 2003 10:30 pm

Re: SLADE3 beta (testing release, beta2 up)

Post by randi »

DoomRater wrote:A map editor that cannot edit anything BUT ZDoom maps is worthless IMO.
You make ZETH cry!
User avatar
Woolie Wool
Posts: 1713
Joined: Mon Dec 15, 2003 3:36 pm
Preferred Pronouns: He/Him
Operating System Version (Optional): Arch Linux, Windows 11
Graphics Processor: nVidia with Vulkan support

Re: SLADE3 beta (testing release, beta2 up)

Post by Woolie Wool »

Will this have mass import, mass export, mass rename, and automatic alignment like XWE does? Those are the things that still require me to use XWE as well as SlumpEd.
Gez
 
 
Posts: 17934
Joined: Fri Jul 06, 2007 3:22 pm

Re: SLADE3 beta (testing release, beta2 up)

Post by Gez »

Mass import: Already in Slumped (if you do "New from file" you can select several files). Still need to be backported in Slade 3, though (it only adds entries one at a time for now, even if you select several).
Mass export: Already in Slumped, just need a "yes to all" option so as not to have to confirm each individual file.
Mass rename: now this is needed I agree.
Automatic alignment: if you mean automatic sprite offsets, it's already in Slumped as well. Select all the entries you want to autoalign, right-click, select "modify offsets".

So, on your wish-list, there are only one thing that's not already in Slumped, and only two that still need to be put in Slade 3.
User avatar
japboy
Posts: 26
Joined: Fri Mar 26, 2010 5:39 am
Location: Tokyo, JAPAN

Looking forward to mapping features

Post by japboy »

hello,
im new to doom mapping and its much more complicated than i expected. yeah but much of fun!

anyway its a great news to start slade development again!
actually i have no choice except slade2 because im a linux user. im currently using it on wine and it works.
i tired doom builder as well, however its heavily depends on .net framework. i dont think its able to use it on linux...
i really hope slade3 gets mapping features in the close future...
slade2 works on wine but 3d mode always crash my pc and other functions seem bit buggy...?
so, again, i hope slade3 will be the real choice for linux doom mappers!

thank you for starting the development again!

*sorry for my bad english as im not a native speaker.
Gez
 
 
Posts: 17934
Joined: Fri Jul 06, 2007 3:22 pm

Re: Looking forward to mapping features

Post by Gez »

japboy wrote:i tired doom builder as well, however its heavily depends on .net framework. i dont think its able to use it on linux...
Mono might help, though I don't think it has all the needed features at the moment.
User avatar
sirjuddington
Posts: 1026
Joined: Wed Jul 16, 2003 4:47 am
Location: Australia

Re: Looking forward to mapping features

Post by sirjuddington »

japboy wrote:hello,
im new to doom mapping and its much more complicated than i expected. yeah but much of fun!

anyway its a great news to start slade development again!
actually i have no choice except slade2 because im a linux user. im currently using it on wine and it works.
i tired doom builder as well, however its heavily depends on .net framework. i dont think its able to use it on linux...
i really hope slade3 gets mapping features in the close future...
slade2 works on wine but 3d mode always crash my pc and other functions seem bit buggy...?
so, again, i hope slade3 will be the real choice for linux doom mappers!

thank you for starting the development again!

*sorry for my bad english as im not a native speaker.
SLADE2 *should* compile ok on linux, if you grab it from the svn (http://mancubus.net/svn/slade/tags/slade_20_beta, a Makefile is included). Not sure everything works 100% though.
Blzut3
 
 
Posts: 3178
Joined: Wed Nov 24, 2004 12:59 pm
Graphics Processor: ATI/AMD with Vulkan/Metal Support

Re: Looking forward to mapping features

Post by Blzut3 »

sirjuddington wrote:Not sure everything works 100% though.
It does work on Linux, but it is fairly broken. Some of the labels show random characters, the map preview doesn't work, and looking 90 degrees up or down in 3D mode causes a crash. Otherwise it's usable.
User avatar
japboy
Posts: 26
Joined: Fri Mar 26, 2010 5:39 am
Location: Tokyo, JAPAN

Re: Looking forward to mapping features

Post by japboy »

sirjuddington wrote:SLADE2 *should* compile ok on linux, if you grab it from the svn (http://mancubus.net/svn/slade/tags/slade_20_beta, a Makefile is included). Not sure everything works 100% though.
thanks for reply. i didnt think theres a Makefile for v2.0. anyway i tried `make` it from your repository:

Code: Select all

...
src/editor_window.cpp: In member function ‘void EditorWindow::edit_lightgradient(wxCommandEvent&)’:
src/editor_window.cpp:985: warning: ‘void wxWindowBase::SetBestFittingSize(const wxSize&)’ is deprecated (declared at /usr/local/include/wx-2.9/wx/window.h:1720)
make: *** [src/editor_window.o] Error 1
well i guess i have to get some libraries. is this version using wxWidgets2.6 and wxscintilla?
btw, trunk version works pretty fine on my Ubuntu 9.10 amd64 :)
User avatar
sirjuddington
Posts: 1026
Joined: Wed Jul 16, 2003 4:47 am
Location: Australia

Re: SLADE3 beta (testing release, beta2 up)

Post by sirjuddington »

You have to compile slade 2 with wxWidgets 2.8. 2.9 disables some wx2.6-compatibility stuff which stops it compiling.
Gez
 
 
Posts: 17934
Joined: Fri Jul 06, 2007 3:22 pm

Re: SLADE3 beta (testing release, beta2 up)

Post by Gez »

sirjuddington wrote:Added ability to open an archive from an ArchiveEntry, ie open Archives-within-Archives (wad maps within pk3, etc).
I have now only one remaining reason to keep SLumpEd around. :) That's audio playback support, by the way.


Otherwise, there's an odd bug which causes certain entries copied from a locked archive to be locked as well. It isn't easy to trace down because it's random. E.g., open an iwad and create or open another archive. Copy a large bunch of files from the iwad to the other, some will be locked. I haven't checked r405 yet though.
User avatar
japboy
Posts: 26
Joined: Fri Mar 26, 2010 5:39 am
Location: Tokyo, JAPAN

Re: Looking forward to mapping features

Post by japboy »

Blzut3 wrote:It does work on Linux, but it is fairly broken. Some of the labels show random characters, the map preview doesn't work, and looking 90 degrees up or down in 3D mode causes a crash. Otherwise it's usable.
this is interesting. i successfully compiled slade_20_beta with wxWidgets-2.8.11.
however it doesnt seem to be usable. it can be launched on Linux though doesnt load maps at all.
once i try to create a new map or load an existing map, its forced to close and command-line says just `Segmentation fault`

have you set up something to make Slade usable?

btw, "90 degrees bug" also happens on Wine.

Return to “Creation, Conversion, and Editing”