I can't reproduce this error on my end. I've also checked the frames refered to, and there doesn't seem to be any issue file-wise.drfrag wrote:It gives a strange error. I dunno why, the mod has a lot of PNGs tough.Edit: i see the pk3 has over 50K files.Code: Select all
Corrupt zlib stream Invalid data encountered for texture 1Shades4.pk3:sprites/g cacos/14 caco ghoul/g14cd2 **** DIED WITH FATAL ERROR: R_InstallSprite: Sprite G14C frame D is missing rotations
Shades of Doom v4.1 (07-09-23)
Forum rules
The Projects forums are only for projects. If you are asking questions about a project, either find that project's thread, or start a thread in the General section instead.
Got a cool project idea but nothing else? Put it in the project ideas thread instead!
Projects for any Doom-based engine (especially 3DGE) are perfectly acceptable here too.
Please read the full rules for more details.
The Projects forums are only for projects. If you are asking questions about a project, either find that project's thread, or start a thread in the General section instead.
Got a cool project idea but nothing else? Put it in the project ideas thread instead!
Projects for any Doom-based engine (especially 3DGE) are perfectly acceptable here too.
Please read the full rules for more details.
Re: Shades of Doom v4.0 - Flippin' Cool (06-01-21)
- drfrag
- Vintage GZDoom Developer
- Posts: 3186
- Joined: Fri Apr 23, 2004 3:51 am
- Location: Spain
- Contact:
Re: Shades of Doom v4.0 - Flippin' Cool (06-01-21)
Like i said it's a compiler issue. Nonetheless i'm not sure if recursion is still a problem, but after renaming the Decorate folder to actors i still kept getting the same error.drfrag wrote:Now it runs, it was the shitty XP compatibility toolset.
- drfrag
- Vintage GZDoom Developer
- Posts: 3186
- Joined: Fri Apr 23, 2004 3:51 am
- Location: Spain
- Contact:
Re: Shades of Doom v4.0 - Flippin' Cool (06-01-21)
I think we should talk in english here, not sure about the rules tough. Your english is not bad, i can understand what you say (unless my english is bad too xD).Netrax wrote:Some spanish blurb.
Thanks, it will run unless they do another release before mine (i will do it in a few days).
I'm in some Doom discords in spanish, such as Kaiser Corporation. I could send you an invitation.
- ClessxAlghazanth
- Posts: 159
- Joined: Sun Feb 17, 2019 9:29 am
Re: Shades of Doom v4.0 - Flippin' Cool (06-01-21)
Greatly enjoying SoD , this is my most played monster pack by far
Have been trying combinations of SoD with Beautiful Doom , Smooth Doom , DRLA , Trailblazer , HnD and a few others
I have a few questions ;
1)My doomguy looks like this when I'm playing with SoD , is this a known behaviour ?
(screen for reference)
2)When playing with DRLA , should I disable (don't load) DRLA monsters , or would they work in harmony ?
3)Is SoD compatible with Champions ? (I've been playing along it without noticable issues but , just to be sure)
I'm running LZDoom (latest devbuild)
Thanks for this excellent monster pack , looking forward to any updates
Best regards



I have a few questions ;
1)My doomguy looks like this when I'm playing with SoD , is this a known behaviour ?

2)When playing with DRLA , should I disable (don't load) DRLA monsters , or would they work in harmony ?
3)Is SoD compatible with Champions ? (I've been playing along it without noticable issues but , just to be sure)
I'm running LZDoom (latest devbuild)
Thanks for this excellent monster pack , looking forward to any updates

Best regards
Re: Shades of Doom v4.0 - Flippin' Cool (06-01-21)
That's the crouch sprites. Are you crouching in-game, per chance?
- Netrax
- Posts: 18
- Joined: Sun Aug 16, 2020 11:14 am
- Graphics Processor: Intel (Modern GZDoom)
- Location: Perú, Ciudad de Lima
Re: Shades of Doom v4.0 - Flippin' Cool (06-01-21)
Haha, okey man.drfrag wrote:I think we should talk in english here, not sure about the rules tough. Your english is not bad, i can understand what you say (unless my english is bad too xD).Netrax wrote:Some spanish blurb.
Thanks, it will run unless they do another release before mine (i will do it in a few days).
I'm in some Doom discords in spanish, such as Kaiser Corporation. I could send you an invitation.
- ClessxAlghazanth
- Posts: 159
- Joined: Sun Feb 17, 2019 9:29 am
Re: Shades of Doom v4.0 - Flippin' Cool (06-01-21)
Seems to happen all the time , including when I'm not crouchingGez wrote:That's the crouch sprites. Are you crouching in-game, per chance?
By the way after experimenting for a bit , it seems more likely to be a DRLA issue , because it is the same even after changing SoD monsters to DRLA ones
(It appears normally when playing vanilla or other mods like Beautiful Doom)
Re: Shades of Doom v4.0 - Flippin' Cool (06-01-21)
I think that's an issue with DRLA, not SoD.ClessxAlghazanth wrote: 1)My doomguy looks like this when I'm playing with SoD , is this a known behaviour ?(screen for reference)
Loading those monsters should most definitely cause problems. Anything related to spawned monsters will most likely cause issues.ClessxAlghazanth wrote: 2)When playing with DRLA , should I disable (don't load) DRLA monsters , or would they work in harmony ?
Last I checked it worked just fine.ClessxAlghazanth wrote: 3)Is SoD compatible with Champions ? (I've been playing along it without noticable issues but , just to be sure)
Glad you like Shades.

-
- Posts: 3
- Joined: Wed Nov 04, 2020 10:18 am
Re: Shades of Doom v4.0 - Flippin' Cool (06-01-21)
Hi, quick question!
I was just curious where the "Warforged" monster came from (one of the Mancubus replacements) -- more specifically, his rocket projectile. I was hoping to find original PNGs of those sprites, prior to being converted to the Doom palette. If there's any chance of finding those, I would really appreciate it! Thanks.
I was just curious where the "Warforged" monster came from (one of the Mancubus replacements) -- more specifically, his rocket projectile. I was hoping to find original PNGs of those sprites, prior to being converted to the Doom palette. If there's any chance of finding those, I would really appreciate it! Thanks.
Re: Shades of Doom v4.0 - Flippin' Cool (06-01-21)
I think they are from Necrodome.RonnieJamesDiner wrote:Hi, quick question!
I was just curious where the "Warforged" monster came from (one of the Mancubus replacements) -- more specifically, his rocket projectile. I was hoping to find original PNGs of those sprites, prior to being converted to the Doom palette. If there's any chance of finding those, I would really appreciate it! Thanks.
- ClessxAlghazanth
- Posts: 159
- Joined: Sun Feb 17, 2019 9:29 am
Re: Shades of Doom v4.0 - Flippin' Cool (06-01-21)
Sorry for the bump , but can I ask where SoD stores its settings in the .ini file ?
I've been trying to locate it but no luck identifying so far
I've been trying to locate it but no luck identifying so far
-
- Posts: 3
- Joined: Wed Nov 04, 2020 10:18 am
Re: Shades of Doom v4.0 - Flippin' Cool (06-01-21)
Ah, sorry for the late response. Thanks for the reply, that's exactly where they're from! CheersCyanide wrote: I think they are from Necrodome.

Re: Shades of Doom v4.0 - Flippin' Cool (06-01-21)
I'm pretty sure that all variables are called "Cyan<Unique_Name>", so if you should be able to look for them by searching for "Cyan".ClessxAlghazanth wrote:Sorry for the bump , but can I ask where SoD stores its settings in the .ini file ?
I've been trying to locate it but no luck identifying so far
Re: Shades of Doom v4.0 - Flippin' Cool (06-01-21)
Small update.
No extra features, just fixes.
Changelog in OP.
No extra features, just fixes.
Changelog in OP.
- SiFi270
- Posts: 455
- Joined: Tue Feb 10, 2015 2:51 am
- Location: Does anyone put a serious answer here?
Re: Shades of Doom v4.0 - Flippin' Cool (06-01-21)
Glad to see you're still working on this, even if it's not new skins.