SLADE Discussion - Latest: v3.2.7 (25/Dec/2024)

Any utility that assists in the creation of mods, assets, etc, go here. For example: Ultimate Doom Builder, Slade, WadSmoosh, Oblige, etc.
Forum rules
The Projects forums are ONLY for YOUR PROJECTS! If you are asking questions about a project, either find that project's thread, or start a thread in the General section instead.

Got a cool project idea but nothing else? Put it in the project ideas thread instead!

Projects for any Doom-based engine (especially 3DGE) are perfectly acceptable here too.

Please read the full rules for more details.
Post Reply
User avatar
riderr3
Posts: 86
Joined: Tue Apr 12, 2011 3:03 pm
Location: Deepest reaches
Contact:
Contact riderr3

Re: SLADE v3.1.0 Beta 4 Released - first post updated

Post by riderr3 »

Not right time to release 3.1.0, there are still pile of bugs which I found!

Vertices shape change is broken in last revision, crash after changing them when 2D map opened. Square vertices even are invisible.

Code: Select all

[i]Version: 3.1.0 beta 3
No current action

Stack Trace:
0: [unknown location] [unknown:-1229798717]
1: [unknown location] [unknown:-1217309696]
2: [unknown location] wxObject::IsKindOf(wxClassInfo const*) const
3: [unknown location] MainApp::onMenu(wxCommandEvent&)
4: [unknown location] wxAppConsoleBase::HandleEvent(wxEvtHandler*, void (wxEvtHandler::*)(wxEvent&), wxEvent&) const
5: [unknown location] wxAppConsoleBase::CallEventHandler(wxEvtHandler*, wxEventFunctor&, wxEvent&) const
6: [unknown location] wxEvtHandler::ProcessEventIfMatchesId(wxEventTableEntryBase const&, wxEvtHandler*, wxEvent&)
7: [unknown location] wxEvtHandler::SearchDynamicEventTable(wxEvent&)
8: [unknown location] wxEvtHandler::TryHereOnly(wxEvent&)
9: [unknown location] wxEvtHandler::ProcessEventLocally(wxEvent&)
10: [unknown location] wxEvtHandler::ProcessEvent(wxEvent&)
11: [unknown location] wxEvtHandler::DoTryApp(wxEvent&)
12: [unknown location] wxEvtHandler::TryAfter(wxEvent&)
13: [unknown location] wxWindowBase::TryAfter(wxEvent&)
14: [unknown location] wxEvtHandler::TryAfter(wxEvent&)
15: [unknown location] wxEvtHandler::ProcessEvent(wxEvent&)
16: [unknown location] wxWindowBase::TryAfter(wxEvent&)
17: [unknown location] wxEvtHandler::ProcessEvent(wxEvent&)
18: [unknown location] wxEvtHandler::SafelyProcessEvent(wxEvent&)
19: [unknown location] wxWindowBase::HandleWindowEvent(wxEvent&) const
20: [unknown location] wxMenuBase::SendEvent(int, int)
21: [unknown location] [unknown:-1226889569]
22: [unknown location] g_cclosure_marshal_VOID__VOID
23: [unknown location] g_closure_invoke
24: [unknown location] [unknown:-1245126439]
25: [unknown location] g_signal_emit_valist
26: [unknown location] g_signal_emit
27: [unknown location] gtk_widget_activate
28: [unknown location] gtk_menu_shell_activate_item
29: [unknown location] [unknown:-1238881679]
30: [unknown location] [unknown:-1238934355]
31: [unknown location] [unknown:-1238972254]
32: [unknown location] [unknown:-1245203715]
33: [unknown location] g_closure_invoke
34: [unknown location] [unknown:-1245124851]
35: [unknown location] g_signal_emit_valist
36: [unknown location] g_signal_emit
37: [unknown location] [unknown:-1237687277]
38: [unknown location] gtk_propagate_event
39: [unknown location] gtk_main_do_event
40: [unknown location] [unknown:-1244571816]
41: [unknown location] g_main_context_dispatch
42: [unknown location] [unknown:-1247244059]
43: [unknown location] g_main_loop_run
44: [unknown location] gtk_main
45: [unknown location] wxGUIEventLoop::DoRun()
46: [unknown location] wxEventLoopBase::Run()
47: [unknown location] wxAppConsoleBase::MainLoop()
48: [unknown location] wxAppConsoleBase::OnRun()
49: [unknown location] wxAppBase::OnRun()
50: [unknown location] wxEntry(int&, wchar_t**)
51: [unknown location] wxEntry(int&, char**)
52: [unknown location] main
53: [unknown location] __libc_start_main
54: [unknown location] _start[/i]
Sector change height crash.

Code: Select all

[i]Version: 3.1.0 beta 3
No current action

Stack Trace:
0: [unknown location] [unknown:-1229520189]
1: [unknown location] [unknown:-1217031168]
2: [unknown location] MapEditor::changeSectorHeight3d(int)
3: [unknown location] MapEditor::handleKeyBind(wxString, fpoint2_t)
4: [unknown location] MapCanvas::onKeyBindPress(wxString)
5: [unknown location] KeyBind::keyPressed(keypress_t)
6: [unknown location] MapCanvas::onMouseWheel(wxMouseEvent&)
7: [unknown location] wxAppConsoleBase::HandleEvent(wxEvtHandler*, void (wxEvtHandler::*)(wxEvent&), wxEvent&) const
8: [unknown location] wxAppConsoleBase::CallEventHandler(wxEvtHandler*, wxEventFunctor&, wxEvent&) const
9: [unknown location] wxEvtHandler::ProcessEventIfMatchesId(wxEventTableEntryBase const&, wxEvtHandler*, wxEvent&)
10: [unknown location] wxEvtHandler::SearchDynamicEventTable(wxEvent&)
11: [unknown location] wxEvtHandler::TryHereOnly(wxEvent&)
12: [unknown location] wxEvtHandler::ProcessEventLocally(wxEvent&)
13: [unknown location] wxEvtHandler::ProcessEvent(wxEvent&)
14: [unknown location] wxEvtHandler::SafelyProcessEvent(wxEvent&)
15: [unknown location] wxWindowBase::HandleWindowEvent(wxEvent&) const
16: [unknown location] wxWindow::GTKProcessEvent(wxEvent&) const
17: [unknown location] [unknown:-1226982809]
18: [unknown location] [unknown:-1238693726]
19: [unknown location] g_closure_invoke
20: [unknown location] [unknown:-1244847911]
21: [unknown location] g_signal_emit_valist
22: [unknown location] g_signal_emit
23: [unknown location] [unknown:-1237408749]
24: [unknown location] gtk_propagate_event
25: [unknown location] gtk_main_do_event
26: [unknown location] [unknown:-1244293288]
27: [unknown location] g_main_context_dispatch
28: [unknown location] [unknown:-1246965531]
29: [unknown location] g_main_loop_run
30: [unknown location] gtk_main
31: [unknown location] wxGUIEventLoop::DoRun()
32: [unknown location] wxEventLoopBase::Run()
33: [unknown location] wxAppConsoleBase::MainLoop()
34: [unknown location] wxAppConsoleBase::OnRun()
35: [unknown location] wxAppBase::OnRun()
36: [unknown location] wxEntry(int&, wchar_t**)
37: [unknown location] wxEntry(int&, char**)
38: [unknown location] main
39: [unknown location] __libc_start_main
40: [unknown location] _start[/i]
Other issues:
-mispell thing "Dead Former Human Sargeant"
-map always using sprites/textures from another archive in tab. Even Im not choosing
-grid squares (64x64) is sometimes disappeared
-console font is awkwardly bigger in rev603 http://s3.postimg.org/udnk8i71d/SLADE1.png rev557 have normal sized font http://s7.postimg.org/ddjsf23vt/SLADE.png
Top
User avatar
sirjuddington
Posts: 1030
Joined: Wed Jul 16, 2003 4:47 am
Location: Australia
Contact:
Contact sirjuddington

Re: SLADE v3.1.0 Beta 4 Released - first post updated

Post by sirjuddington »

Most of that should be fixed now, though I'm not seeing that misspelling, and I've never seen the 64x64 grid disappear, so not sure about those ones.

Also, a few questions for those who have been using/testing the map editor - how often are you using the generic object properties list (via the side panel or 'Properties' in the context menu)? And if you use it regularly, what for? I've tried to minimise the need to use it by making common tasks (eg. setting thing types or line specials) more easily accessible in other ways. If it is annoying/difficult to use and needs to be used regularly I might just end up creating custom properties dialogs for each edit mode like in SLADE2/DB.
Top
User avatar
riderr3
Posts: 86
Joined: Tue Apr 12, 2011 3:03 pm
Location: Deepest reaches
Contact:
Contact riderr3

Re: SLADE v3.1.0 Beta 4 Released - first post updated

Post by riderr3 »

sirjuddington wrote: Also, a few questions for those who have been using/testing the map editor - how often are you using the generic object properties list (via the side panel or 'Properties' in the context menu)?
Side panel used rarily. Actually I prefer use right mouse click for editing objects.


And some new issues for now:

-undo in 3D mode messed after pasting flats - floors/ceilings are one-colored untextured surface http://s8.postimg.org/8pbs5sbjp/SLADE_M ... nt_wad.png

-missing "-" (empty) texture. This is exists in previous revisions http://s28.postimg.org/pj17pungt/Browse_Texture.png
Also the textures browser have strange behavior (Sometimes I need open ALL>TEXTURES. And flats are divided into doom2.wad and my.wad - but textures are inconveniently shown in one list.)

-ZenNode don't build nodes and freezes SLADE3. Outside SLADE3 ZenNode working without problems. Also, "Write zero reject" selected in ZDBSP options is anyway builds REJECT lump, and vise versa. Probably there are more wrong parameters related with node builders options.

-SLADE3 freeze on "Building sector polygons" when opening maps. This is because something changed in cfg file - deleting this cvars from slade.cfg resolve the problem:

Code: Select all

	mew_width                  496
	mew_height                 505
-crash after opened MAP06 of Hellfire.wad (happened only one time)

Code: Select all

Version: 3.1.0 beta 3
No current action

Stack Trace:
0: [unknown location] [unknown:-1229598013]
1: [unknown location] [unknown:-1217108992]
2: [unknown location] Polygon2D::render()
3: [unknown location] MapRenderer2D::renderTaggedFlats(std::vector<MapSector*, std::allocator<MapSector*> >&, float)
4: [unknown location] MapCanvas::drawMap2d()
5: [unknown location] MapCanvas::draw()
6: [unknown location] OGLCanvas::onPaint(wxPaintEvent&)
7: [unknown location] wxAppConsoleBase::HandleEvent(wxEvtHandler*, void (wxEvtHandler::*)(wxEvent&), wxEvent&) const
8: [unknown location] wxAppConsoleBase::CallEventHandler(wxEvtHandler*, wxEventFunctor&, wxEvent&) const
9: [unknown location] wxEvtHandler::ProcessEventIfMatchesId(wxEventTableEntryBase const&, wxEvtHandler*, wxEvent&)
10: [unknown location] wxEvtHandler::SearchDynamicEventTable(wxEvent&)
11: [unknown location] wxEvtHandler::TryHereOnly(wxEvent&)
12: [unknown location] wxEvtHandler::ProcessEventLocally(wxEvent&)
13: [unknown location] wxEvtHandler::ProcessEvent(wxEvent&)
14: [unknown location] wxEvtHandler::SafelyProcessEvent(wxEvent&)
15: [unknown location] wxWindowBase::HandleWindowEvent(wxEvent&) const
16: [unknown location] wxGLCanvas::OnInternalIdle()
17: [unknown location] wxWindowBase::SendIdleEvents(wxIdleEvent&)
18: [unknown location] wxWindowBase::SendIdleEvents(wxIdleEvent&)
19: [unknown location] wxFrame::SendIdleEvents(wxIdleEvent&)
20: [unknown location] wxAppBase::ProcessIdle()
21: [unknown location] wxApp::DoIdle()
22: [unknown location] [unknown:-1227326721]
23: [unknown location] [unknown:-1247053808]
24: [unknown location] g_main_context_dispatch
25: [unknown location] [unknown:-1247043355]
26: [unknown location] g_main_loop_run
27: [unknown location] gtk_main
28: [unknown location] wxGUIEventLoop::DoRun()
29: [unknown location] wxEventLoopBase::Run()
30: [unknown location] wxAppConsoleBase::MainLoop()
31: [unknown location] wxAppConsoleBase::OnRun()
32: [unknown location] wxAppBase::OnRun()
33: [unknown location] wxEntry(int&, wchar_t**)
34: [unknown location] wxEntry(int&, char**)
35: [unknown location] main
36: [unknown location] __libc_start_main
37: [unknown location] _start
-changing parameters of linedefs caused this random crash

Code: Select all

Version: 3.1.0 beta 3
Current action: mapw_item_properties
Stack Trace:
0: [unknown location] [unknown:-1229155645]
1: [unknown location] [unknown:-1216666624]
2: [unknown location] MapObjectPropsPanel::updateArgs(MOPGIntWithArgsProperty*)
3: [unknown location] MOPGIntWithArgsProperty::OnSetValue()
4: [unknown location] wxPGProperty::SetValue(wxVariant, wxVariant*, int)
5: [unknown location] wxPropertyGrid::DoPropertyChanged(wxPGProperty*, unsigned int)
6: [unknown location] wxPropertyGrid::CommitChangesFromEditor(unsigned int)
7: [unknown location] wxPropertyGrid::DoSelectProperty(wxPGProperty*, unsigned int)
8: [unknown location] wxPropertyGrid::~wxPropertyGrid()
9: [unknown location] wxPropertyGrid::~wxPropertyGrid()
10: [unknown location] wxBookCtrlBase::DeletePage(unsigned int)
11: [unknown location] wxNotebook::DeleteAllPages()
12: [unknown location] wxNotebook::~wxNotebook()
13: [unknown location] wxNotebook::~wxNotebook()
14: [unknown location] wxWindowBase::Destroy()
15: [unknown location] wxWindowBase::DestroyChildren()
16: [unknown location] wxWindow::~wxWindow()
17: [unknown location] MapObjectPropsPanel::~MapObjectPropsPanel()
18: [unknown location] wxWindowBase::Destroy()
19: [unknown location] wxWindowBase::DestroyChildren()
20: [unknown location] wxWindow::~wxWindow()
21: [unknown location] wxNonOwnedWindow::~wxNonOwnedWindow()
22: [unknown location] wxTopLevelWindowBase::~wxTopLevelWindowBase()
23: [unknown location] wxTopLevelWindowGTK::~wxTopLevelWindowGTK()
24: [unknown location] wxDialog::~wxDialog()
25: [unknown location] MapCanvas::editObjectProperties(std::vector<MapObject*, std::allocator<MapObject*> >&)
26: [unknown location] MapCanvas::handleAction(wxString)
27: [unknown location] MainApp::onMenu(wxCommandEvent&)
28: [unknown location] wxAppConsoleBase::HandleEvent(wxEvtHandler*, void (wxEvtHandler::*)(wxEvent&), wxEvent&) const
29: [unknown location] wxAppConsoleBase::CallEventHandler(wxEvtHandler*, wxEventFunctor&, wxEvent&) const
30: [unknown location] wxEvtHandler::ProcessEventIfMatchesId(wxEventTableEntryBase const&, wxEvtHandler*, wxEvent&)
31: [unknown location] wxEvtHandler::SearchDynamicEventTable(wxEvent&)
32: [unknown location] wxEvtHandler::TryHereOnly(wxEvent&)
33: [unknown location] wxEvtHandler::ProcessEventLocally(wxEvent&)
34: [unknown location] wxEvtHandler::ProcessEvent(wxEvent&)
35: [unknown location] wxEvtHandler::DoTryApp(wxEvent&)
36: [unknown location] wxEvtHandler::TryAfter(wxEvent&)
37: [unknown location] wxWindowBase::TryAfter(wxEvent&)
38: [unknown location] wxEvtHandler::TryAfter(wxEvent&)
39: [unknown location] wxEvtHandler::ProcessEvent(wxEvent&)
40: [unknown location] wxWindowBase::TryAfter(wxEvent&)
41: [unknown location] wxEvtHandler::ProcessEvent(wxEvent&)
42: [unknown location] wxEvtHandler::SafelyProcessEvent(wxEvent&)
43: [unknown location] wxWindowBase::HandleWindowEvent(wxEvent&) const
44: [unknown location] wxMenuBase::SendEvent(int, int)
45: [unknown location] [unknown:-1226246497]
46: [unknown location] g_cclosure_marshal_VOID__VOID
47: [unknown location] g_closure_invoke
48: [unknown location] [unknown:-1244483367]
49: [unknown location] g_signal_emit_valist
50: [unknown location] g_signal_emit
51: [unknown location] gtk_widget_activate
52: [unknown location] gtk_menu_shell_activate_item
53: [unknown location] [unknown:-1238238607]
54: [unknown location] [unknown:-1238291283]
55: [unknown location] [unknown:-1238329182]
56: [unknown location] [unknown:-1244560643]
57: [unknown location] g_closure_invoke
58: [unknown location] [unknown:-1244481779]
59: [unknown location] g_signal_emit_valist
60: [unknown location] g_signal_emit
61: [unknown location] [unknown:-1237044205]
62: [unknown location] gtk_propagate_event
63: [unknown location] gtk_main_do_event
64: [unknown location] [unknown:-1243928744]
65: [unknown location] g_main_context_dispatch
66: [unknown location] [unknown:-1246600987]
67: [unknown location] g_main_context_iteration
68: [unknown location] gtk_main_iteration
69: [unknown location] wxWindow::DoPopupMenu(wxMenu*, int, int)
70: [unknown location] wxWindowBase::PopupMenu(wxMenu*, int, int)
71: [unknown location] MapCanvas::onMouseUp(wxMouseEvent&)
72: [unknown location] wxAppConsoleBase::HandleEvent(wxEvtHandler*, void (wxEvtHandler::*)(wxEvent&), wxEvent&) const
73: [unknown location] wxAppConsoleBase::CallEventHandler(wxEvtHandler*, wxEventFunctor&, wxEvent&) const
74: [unknown location] wxEvtHandler::ProcessEventIfMatchesId(wxEventTableEntryBase const&, wxEvtHandler*, wxEvent&)
75: [unknown location] wxEvtHandler::SearchDynamicEventTable(wxEvent&)
76: [unknown location] wxEvtHandler::TryHereOnly(wxEvent&)
77: [unknown location] wxEvtHandler::ProcessEventLocally(wxEvent&)
78: [unknown location] wxEvtHandler::ProcessEvent(wxEvent&)
79: [unknown location] wxEvtHandler::SafelyProcessEvent(wxEvent&)
80: [unknown location] wxWindowBase::HandleWindowEvent(wxEvent&) const
81: [unknown location] wxWindow::GTKProcessEvent(wxEvent&) const
82: [unknown location] [unknown:-1226620931]
83: [unknown location] [unknown:-1238329182]
84: [unknown location] g_closure_invoke
85: [unknown location] [unknown:-1244483367]
86: [unknown location] g_signal_emit_valist
87: [unknown location] g_signal_emit
88: [unknown location] [unknown:-1237044205]
89: [unknown location] gtk_propagate_event
90: [unknown location] gtk_main_do_event
91: [unknown location] [unknown:-1243928744]
92: [unknown location] g_main_context_dispatch
93: [unknown location] [unknown:-1246600987]
94: [unknown location] g_main_loop_run
95: [unknown location] gtk_main
96: [unknown location] wxGUIEventLoop::DoRun()
97: [unknown location] wxEventLoopBase::Run()
98: [unknown location] wxAppConsoleBase::MainLoop()
99: [unknown location] wxAppConsoleBase::OnRun()
100: [unknown location] wxAppBase::OnRun()
101: [unknown location] wxEntry(int&, wchar_t**)
102: [unknown location] wxEntry(int&, char**)
103: [unknown location] main
104: [unknown location] __libc_start_main
105: [unknown location] _start

P.S. Bug with toggling 3D mode finally fixed. At least I fix that by disabling "Use vertex buffer object" in OpenGL options.
Top
User avatar
GhostKillahZero
Posts: 742
Joined: Wed Nov 13, 2013 4:41 pm
Location: 343 Industries Headquarters
Contact:
Contact GhostKillahZero

Re: SLADE v3.1.0 Beta 4 Released - first post updated

Post by GhostKillahZero »

I liked to make a suggestion, I know we can move enteries up/down, but can we move folders in pk3/zip too?
Top
User avatar
Nash
 
 
Posts: 17500
Joined: Mon Oct 27, 2003 12:07 am
Location: Kuala Lumpur, Malaysia
Contact:
Contact Nash

Re: SLADE v3.1.0 Beta 4 Released - first post updated

Post by Nash »

^ Yeah this has occasionally bugged (thank you OCD!)...
Top
User avatar
JPL
 
 
Posts: 523
Joined: Mon Apr 09, 2012 12:27 pm
Contact:
Contact JPL

Re: SLADE v3.1.0 Beta 4 Released - first post updated

Post by JPL »

When I run latest, using the latest wxWidgets git, and try to open any map in the map editor I get this crash:
Spoiler:
Ubuntu 13.10 64-bit
Top
User avatar
JPL
 
 
Posts: 523
Joined: Mon Apr 09, 2012 12:27 pm
Contact:
Contact JPL

Re: SLADE v3.1.0 Beta 4 Released - first post updated

Post by JPL »

Update: pretty sure this happened because I did an out-of-tree build, using

Code: Select all

mkdir build
cd build
cmake ..
make
instead of the wiki-recommended

Code: Select all

cd dist
cmake ..
make
When I tried the latter, the crash went away.

It may be nice to support the former at some point, as that's some peoples' preferred practice and the cause of the crash is non-obvious.
Top
User avatar
sirjuddington
Posts: 1030
Joined: Wed Jul 16, 2003 4:47 am
Location: Australia
Contact:
Contact sirjuddington

Re: SLADE v3.1.0 Beta 4 Released - first post updated

Post by sirjuddington »

It's probably because an icon was missing, do you have a full copy of the 'dist/res' directory under 'build'? The res directory needs to be in the same directory as the executable.
Top
User avatar
JPL
 
 
Posts: 523
Joined: Mon Apr 09, 2012 12:27 pm
Contact:
Contact JPL

Re: SLADE v3.1.0 Beta 4 Released - first post updated

Post by JPL »

sirjuddington wrote:It's probably because an icon was missing, do you have a full copy of the 'dist/res' directory under 'build'? The res directory needs to be in the same directory as the executable.
Indeed, that was it, and because I was building in a dir of my own creation rather than dist/, it failed.
Top
User avatar
sirjuddington
Posts: 1030
Joined: Wed Jul 16, 2003 4:47 am
Location: Australia
Contact:
Contact sirjuddington

Re: SLADE v3.1.0 Beta 4 Released - first post updated

Post by sirjuddington »

riderr3 wrote:-undo in 3D mode messed after pasting flats - floors/ceilings are one-colored untextured surface http://s8.postimg.org/8pbs5sbjp/SLADE_M ... nt_wad.png
Hmm, can't reproduce this one, did it happen randomly or can you give steps to reproduce it?
Top
User avatar
TheMightyHeracross
Posts: 2100
Joined: Sun Aug 18, 2013 9:41 am
Location: Philadelphia, PA

Re: SLADE v3.1.0 Beta 4 Released - first post updated

Post by TheMightyHeracross »

I do not seem to be able to set the code language for any lumps. If it's a DECORATE lump it will set it automatically, same for MAPINFO, SNDINFO, etc. but that's it. Is this a bug? Now I don't have any of the features that you get by selecting the language.
Top
User avatar
riderr3
Posts: 86
Joined: Tue Apr 12, 2011 3:03 pm
Location: Deepest reaches
Contact:
Contact riderr3

Re: SLADE v3.1.0 Beta 4 Released - first post updated

Post by riderr3 »

sirjuddington wrote:
riderr3 wrote:-undo in 3D mode messed after pasting flats - floors/ceilings are one-colored untextured surface http://s8.postimg.org/8pbs5sbjp/SLADE_M ... nt_wad.png
Hmm, can't reproduce this one, did it happen randomly or can you give steps to reproduce it?
Its happened because "Use vertex buffer object if supported" is turned off. Also, the 2D map FPS is drop from 60 to 20-30 if this option turned off. Anyway, now I turned on this (at least I didnt see 3D toggling crashes at the moment).


About grid disappearing which I mentioned before its happened sometimes after opening map (seems some lines have issues too)
http://s30.postimg.org/n3ui4p0bl/SLADE_ ... _wad_2.png
After 3D toggle it returns to normal
http://s18.postimg.org/ibklo75i1/SLADE_ ... _wad_3.png

And player sprite disappearing after moving still present
http://s27.postimg.org/rojuhx62r/SLADE_ ... tn_wad.png
Top
User avatar
Breezeep
Posts: 213
Joined: Sun Mar 02, 2014 5:12 pm
Location: The Slipgate Complex
Contact:
Contact Breezeep

Re: SLADE v3.1.0 Beta 4 Released - first post updated

Post by Breezeep »

I'm trying to put two texture packs (Gothic and Decon textures) into my wad.
Anyone knows how to do this properly?
Top
User avatar
Breezeep
Posts: 213
Joined: Sun Mar 02, 2014 5:12 pm
Location: The Slipgate Complex
Contact:
Contact Breezeep

Re: SLADE v3.1.0 Beta 4 Released - first post updated

Post by Breezeep »

*bump* anyone?
Top
User avatar
Kappes Buur
 
 
Posts: 4182
Joined: Thu Jul 17, 2003 12:19 am
Graphics Processor: nVidia (Legacy GZDoom)
Location: British Columbia, Canada
Contact:
Contact Kappes Buur

Re: SLADE v3.1.0 Beta 4 Released - first post updated

Post by Kappes Buur »

https://github.com/sirjuddington/SLADE/wiki/Tutorials
Top
Post Reply

Return to “Creation, Conversion, and Editing”