[Request] DoomRL Arsenal Contribution Thread

Requests go in THIS forum!
Forum rules
The Projects forums are only for projects. If you are asking questions about a project, either find that project's thread, or start a thread in the General section instead.

Got a cool project idea but nothing else? Put it in the project ideas thread instead!

Projects for any Doom-based engine (especially 3DGE) are perfectly acceptable here too.

Please read the full rules for more details.
Post Reply
User avatar
Yholl
Posts: 1953
Joined: Mon Dec 17, 2012 11:08 am
Location: Here, stupid.

Re: [Request] DoomRL Arsenal Contribution Thread

Post by Yholl »

SoloSpaghetti wrote:
Yholl wrote: Every single rotation and frame. This mod is coop friendly, after all. If you do decide to try making these, just make single frames and show them to me, so I don't waste countless hours of your hard work when I point out I want something different, or whatever.
Ok. By I'm a bit busy in these days, but I should have the time to create something. :)

EDIT.
Something like this could work for Marine or Scout?
Prova1HD.png
That would be great for Scout, just give him a pistol instead. You can find the current pistol Scout skin in Ghastly's glorious Marine Skins

I'm thinking of replacing the current Marine sprites with a variant of the chaingunner sprites I have.

Right now, I just finished making the full Cerberus armor and boots, along with the set bonus that comes with it. It's easily one of the most powerful set bonuses, but harder to acquire due to requiring three pieces rather than two.
User avatar
SoloSpaghetti
Posts: 484
Joined: Wed Jun 26, 2013 6:46 am
Location: Pistoia, Italy

Re: [Request] DoomRL Arsenal Contribution Thread

Post by SoloSpaghetti »

Got it. Expect a complete set in a couple of days. ;)

EDIT. Wait wait wait! Do you want event crouching set of rotations?
User avatar
Yholl
Posts: 1953
Joined: Mon Dec 17, 2012 11:08 am
Location: Here, stupid.

Re: [Request] DoomRL Arsenal Contribution Thread

Post by Yholl »

SoloSpaghetti wrote:Got it. Expect a complete set in a couple of days. ;)

EDIT. Wait wait wait! Do you want event crouching set of rotations?
Heh, nah, crouching is not required. The chaingunner sprites I'd like to use for the Marine obviously do not have crouching sprites, so I don't feel compelled to extend that to the other class sprites.

Only Phaseshift Boots and Nyarlaptotep's boots remain, and then all armor and boots will be complete. After that, I'll go through all the weapons and assign them their proper damagetypes, fiddle with the computer maps a bit, and then test it for a while. After that, I shall release the gulls Cardassians Beta 4.
User avatar
SoloSpaghetti
Posts: 484
Joined: Wed Jun 26, 2013 6:46 am
Location: Pistoia, Italy

Re: [Request] DoomRL Arsenal Contribution Thread

Post by SoloSpaghetti »

Yholl wrote:Heh, nah, crouching is not required.
Thanks God... I love you! :wub:
User avatar
SoloSpaghetti
Posts: 484
Joined: Wed Jun 26, 2013 6:46 am
Location: Pistoia, Italy

Re: [Request] DoomRL Arsenal Contribution Thread

Post by SoloSpaghetti »

PLA2Afull.png
PLA2Afull.png (14.34 KiB) Viewed 434 times
First rotation.
(When I'll have finished them all I'll send you all single frames packed in a zipped archive by PM, so you don't have to work on them too much) :)

EDIT.
PLA2Bfull.png
PLA2Bfull.png (13.82 KiB) Viewed 427 times
16 sprites done, 53 to go.
User avatar
SoloSpaghetti
Posts: 484
Joined: Wed Jun 26, 2013 6:46 am
Location: Pistoia, Italy

Re: [Request] DoomRL Arsenal Contribution Thread

Post by SoloSpaghetti »

Prova2.png
Prova2.png (1.92 KiB) Viewed 426 times
Prova2HD.png
Prova2HD.png (2.16 KiB) Viewed 426 times
While I was boring I made this.. A rather soviet style tecnician. :)

Ah, and while I was there I made these too.
_PLA2Cfull.png
_PLA2Cfull.png (14.59 KiB) Viewed 418 times
User avatar
Yholl
Posts: 1953
Joined: Mon Dec 17, 2012 11:08 am
Location: Here, stupid.

Re: [Request] DoomRL Arsenal Contribution Thread

Post by Yholl »

SoloSpaghetti wrote:
Prova2.png
Prova2HD.png
While I was boring I made this.. A rather soviet style tecnician. :)

Ah, and while I was there I made these too.
_PLA2Cfull.png
Those sprites are super awesome, man! With the Technician, you reckon you could have him without a helmet, with nightvision goggles up on his forehead? And a belt with techy stuff around his waist?

Also, I was planning on having a different mugshot for the Marine (One with a helmet visible that I have) and have the others with Doomguy's normal mugshot, but do you reckon you could make custom mugshots for these two? They're just too awesome!

Also, Beta 4 is out. HAVE FUN! 8-)
User avatar
SoloSpaghetti
Posts: 484
Joined: Wed Jun 26, 2013 6:46 am
Location: Pistoia, Italy

Re: [Request] DoomRL Arsenal Contribution Thread

Post by SoloSpaghetti »

Yholl wrote:Those sprites are super awesome, man! With the Technician, you reckon you could have him without a helmet, with nightvision goggles up on his forehead? And a belt with techy stuff around his waist?
I was thinking the same. :) As soon as I finish the scout I'll start with it!
Yholl wrote:Also, I was planning on having a different mugshot for the Marine (One with a helmet visible that I have) and have the others with Doomguy's normal mugshot, but do you reckon you could make custom mugshots for these two? They're just too awesome!
My god, I never have thought to something like that... But sounds very cool! :D Just signed in the "to-do" list. ;)

(I'll take a little break, now It's time to test my child. :P )

Ah, I was forgetting, will tecnician's sprites have the classic rifle or do I have to use something else?
User avatar
Yholl
Posts: 1953
Joined: Mon Dec 17, 2012 11:08 am
Location: Here, stupid.

Re: [Request] DoomRL Arsenal Contribution Thread

Post by Yholl »

SoloSpaghetti wrote:Ah, I was forgetting, will tecnician's sprites have the classic rifle or do I have to use something else?
Just go with the machinegun he's got there, it looks good. The Technician has no favoured weapon type, so he'd have the generic rifle otherwise.
User avatar
SoloSpaghetti
Posts: 484
Joined: Wed Jun 26, 2013 6:46 am
Location: Pistoia, Italy

Re: [Request] DoomRL Arsenal Contribution Thread

Post by SoloSpaghetti »

Got it.
PS: Scout's walking rotations are complete! ;)
_PLA2Dfull.png
_PLA2Dfull.png (13.97 KiB) Viewed 411 times
User avatar
Yholl
Posts: 1953
Joined: Mon Dec 17, 2012 11:08 am
Location: Here, stupid.

Re: [Request] DoomRL Arsenal Contribution Thread

Post by Yholl »

SoloSpaghetti wrote:Got it.
PS: Scout's walking rotations are complete! ;)
_PLA2Dfull.png
Goddamn you work fast. You never cease to amaze.
User avatar
SoloSpaghetti
Posts: 484
Joined: Wed Jun 26, 2013 6:46 am
Location: Pistoia, Italy

Re: [Request] DoomRL Arsenal Contribution Thread

Post by SoloSpaghetti »

_PLA2Efull.png
_PLA2Efull.png (15.64 KiB) Viewed 393 times
Hands up! [I'd say enough sprites for today]
User avatar
Yholl
Posts: 1953
Joined: Mon Dec 17, 2012 11:08 am
Location: Here, stupid.

Re: [Request] DoomRL Arsenal Contribution Thread

Post by Yholl »

SoloSpaghetti wrote:(When I'll have finished them all I'll send you all single frames packed in a zipped archive by PM, so you don't have to work on them too much) :)
Oh yeah, two last things.
1. If you are planning on sending them to me like that, could you make sure the sprite size conforms exactly to the pixels? Otherwise I'll have to go through them all anyway.

2. When you get to it, could you also recolor the Technician's boots to be the same color as the Scouts boots there? For consistency. And kicking.
User avatar
SoloSpaghetti
Posts: 484
Joined: Wed Jun 26, 2013 6:46 am
Location: Pistoia, Italy

Re: [Request] DoomRL Arsenal Contribution Thread

Post by SoloSpaghetti »

Yholl wrote:Oh yeah, two last things.
First one is already done.
Second one it's ok. :)

Ah, have you ever thought to make different step sound for each type of boots? It would be cool!
User avatar
Yholl
Posts: 1953
Joined: Mon Dec 17, 2012 11:08 am
Location: Here, stupid.

Re: [Request] DoomRL Arsenal Contribution Thread

Post by Yholl »

SoloSpaghetti wrote:
Yholl wrote:Oh yeah, two last things.
First one is already done.
Second one it's ok. :)

Ah, have you ever thought to make different step sound for each type of boots? It would be cool!
Yeah, I plan to have at least three different footstep noises, I simply haven't gotten around to that yet. Expect it in Beta 5, most likely.
Post Reply

Return to “Requests”