[Request] DoomRL Arsenal Contribution Thread

Requests go in THIS forum!
Forum rules
The Projects forums are only for projects. If you are asking questions about a project, either find that project's thread, or start a thread in the General section instead.

Got a cool project idea but nothing else? Put it in the project ideas thread instead!

Projects for any Doom-based engine (especially 3DGE) are perfectly acceptable here too.

Please read the full rules for more details.
User avatar
SoloSpaghetti
Posts: 484
Joined: Wed Jun 26, 2013 6:46 am
Location: Pistoia, Italy

Re: [Request] DoomRL Arsenal Contribution Thread

Post by SoloSpaghetti »

I hope this little panel might be enough handsome. :) About the wires... Well... Let's say I tryed. :)
Mk2red.png
Mk2red.png (1.25 KiB) Viewed 808 times
MK2green.png
MK2green.png (1.59 KiB) Viewed 808 times
MK2blue.png
MK2blue.png (1.38 KiB) Viewed 808 times
User avatar
SoloSpaghetti
Posts: 484
Joined: Wed Jun 26, 2013 6:46 am
Location: Pistoia, Italy

Re: [Request] DoomRL Arsenal Contribution Thread

Post by SoloSpaghetti »

I admit... I got carried away a little bit... :P
Ballistic RGB.png
Ballistic RGB.png (1.53 KiB) Viewed 806 times
Spoiler:
User avatar
SoloSpaghetti
Posts: 484
Joined: Wed Jun 26, 2013 6:46 am
Location: Pistoia, Italy

Re: [Request] DoomRL Arsenal Contribution Thread

Post by SoloSpaghetti »

I cannot resist.. in my pauses I made these:

Ballistic Vest
Ballistic Vest RGB.png
Ballistic Vest RGB.png (1.03 KiB) Viewed 792 times
Nanofiber Armor
NanoRGB.png
NanoRGB.png (1.87 KiB) Viewed 792 times
Onix Armor (the simplest)
Onix.png
Onix.png (487 Bytes) Viewed 792 times
User avatar
Yholl
Posts: 1953
Joined: Mon Dec 17, 2012 11:08 am
Location: Here, stupid.

Re: [Request] DoomRL Arsenal Contribution Thread

Post by Yholl »

Bloody hell, you're a one-man army of armor construction! At this rate I'll have all the armors done in no time!
Seriously, you have no idea how amazing and helpful this is.
SoloSpaghetti wrote:Onix Armor (the simplest)
Onix.png
Reckon you could have at least two slightly lighter shades of black on it, so you can still see the surface of the armor?
SoloSpaghetti wrote:When you speak of energy projector what do you have in mind? Something like an antenna?
Basically, I visualised it like a sort of metal harness that goes around the armor like the straps on a backpack or something, linking long strips of techy metal with flashing lights in them, which project the energy fields that reduce damage types. Some of the armors would be just the harness with no armor, and then you could simply just paste the harness onto the armors that also need a projector harness, like the ridiculous Shielded Armor.
I hope that description kinda makes sense. But anyway, as long is it looks like some sort of shield generating system attached to the armor in a few places, I'll be fine with it.
User avatar
SoloSpaghetti
Posts: 484
Joined: Wed Jun 26, 2013 6:46 am
Location: Pistoia, Italy

Re: [Request] DoomRL Arsenal Contribution Thread

Post by SoloSpaghetti »

Yholl wrote: Reckon you could have at least two slightly lighter shades of black on it, so you can still see the surface of the armor?
I didnt' notice, there was some poblem in compression the image... I'll fix it as soon as I can. :)
Yholl wrote: Basically, I visualised it like a sort of metal harness that goes around the armor like the straps on a backpack or something, linking long strips of techy metal with flashing lights in them, which project the energy fields that reduce damage types. Some of the armors would be just the harness with no armor, and then you could simply just paste the harness onto the armors that also need a projector harness, like the ridiculous Shielded Armor.
I hope that description kinda makes sense. But anyway, as long is it looks like some sort of shield generating system attached to the armor in a few places, I'll be fine with it.
I'll try something. Meanwhile...
BAM! Phase Armor! :)
Phase.png
Phase.png (1.56 KiB) Viewed 781 times
User avatar
Yholl
Posts: 1953
Joined: Mon Dec 17, 2012 11:08 am
Location: Here, stupid.

Re: [Request] DoomRL Arsenal Contribution Thread

Post by Yholl »

SoloSpaghetti wrote:I'll try something. Meanwhile...
BAM! Phase Armor! :)
Phase.png
Woah! That's way different from what I was expecting... I like it a lot! Nice work!
User avatar
SoloSpaghetti
Posts: 484
Joined: Wed Jun 26, 2013 6:46 am
Location: Pistoia, Italy

Re: [Request] DoomRL Arsenal Contribution Thread

Post by SoloSpaghetti »

I've tried with Energy-Shielded Vest... does it work?
Shield vest.png
Shield vest.png (955 Bytes) Viewed 774 times
and HD to see it better :)
Shield vest HD.png
Shield vest HD.png (1.14 KiB) Viewed 774 times
EDIT:
I almost forgot it... The Onix Armor a bit lightened.
Onix.png
Onix.png (529 Bytes) Viewed 773 times
User avatar
SoloSpaghetti
Posts: 484
Joined: Wed Jun 26, 2013 6:46 am
Location: Pistoia, Italy

Re: [Request] DoomRL Arsenal Contribution Thread

Post by SoloSpaghetti »

So.. Is this armor big enough for its description? :)
FireShield12.png
FireShield12.png (1.39 KiB) Viewed 769 times
FireShield12HD.png
FireShield12HD.png (1.75 KiB) Viewed 769 times
User avatar
Yholl
Posts: 1953
Joined: Mon Dec 17, 2012 11:08 am
Location: Here, stupid.

Re: [Request] DoomRL Arsenal Contribution Thread

Post by Yholl »

SoloSpaghetti wrote:So.. Is this armor big enough for its description? :)
FireShield12.png
FireShield12HD.png
Oh wow. Yes indeed it is. :)
Oh, minor thing, try to match the red armor colors to the darker red armor I showed before. Easily, fixed, I've done so on most of the ones you've sent me already, so no worries about having to go back and redo them.
SoloSpaghetti wrote:I've tried with Energy-Shielded Vest... does it work?
Shield vest.png
Yeah, that works well.
SoloSpaghetti wrote:I almost forgot it... The Onix Armor a bit lightened.
Onix.png
Nice, thanks!


Oh, also, when I imported the Blue Fireproof Armor ingame, apparently the blue gets converted straight to the exact same grey as the armor, due to it not being in the Doom pallete. If you could, you reckon you could get it to more closely match the blue armor colors? I've updated the main post with a new picture that also features the weird grey fireproof suit.
Ah, I hate getting you to fix these things after all the hard work you put into them. Seems mean of me. I know you want me to, though, it's just how I am.
User avatar
SoloSpaghetti
Posts: 484
Joined: Wed Jun 26, 2013 6:46 am
Location: Pistoia, Italy

Re: [Request] DoomRL Arsenal Contribution Thread

Post by SoloSpaghetti »

I'll se what can I do. I'm sorry for the colors, but working with Photoshop, it's not easy respecting Doom palette (and I didn't even ever try :P )...
Ah, look at what I created.
Ballistic Shield 12.png
Ballistic Shield 12.png (1.2 KiB) Viewed 762 times
Ballistic Shield 12 HD.png
Ballistic Shield 12 HD.png (1.42 KiB) Viewed 762 times
I have to admit... It came out a little sadomaso... :P

EDIT I tried to encrease the saturating level of the blue.
blu.png
blu.png (2.39 KiB) Viewed 761 times
User avatar
SoloSpaghetti
Posts: 484
Joined: Wed Jun 26, 2013 6:46 am
Location: Pistoia, Italy

Re: [Request] DoomRL Arsenal Contribution Thread

Post by SoloSpaghetti »

And now... My masterpiece! :P
Spoiler:
User avatar
Yholl
Posts: 1953
Joined: Mon Dec 17, 2012 11:08 am
Location: Here, stupid.

Re: [Request] DoomRL Arsenal Contribution Thread

Post by Yholl »

SoloSpaghetti wrote:And now... My masterpiece! :P
Spoiler:
Wuv you.

Do you reckon you could clean up the Necroarmor a bit for me? Lot's of transparent pixels, especially around the spikes, way too many for me to feel comfortable editing it myself.

Also, would you like me to put something into DoomRL Arsenal just for you? Could be anything, weapon, armor, boots, set of items, all sorts. Consider it a kind of repayment for all the help you've been giving me.
User avatar
Blox
Posts: 3728
Joined: Wed Sep 22, 2010 9:35 am
Location: Apathetic Limbo

Re: [Request] DoomRL Arsenal Contribution Thread

Post by Blox »

Could you give me the current Necroarmor graphic?
I'm top derp at the moment, so I can't really find anything at the moment. All other systems seem fine though.
User avatar
SoloSpaghetti
Posts: 484
Joined: Wed Jun 26, 2013 6:46 am
Location: Pistoia, Italy

Re: [Request] DoomRL Arsenal Contribution Thread

Post by SoloSpaghetti »

Yholl wrote:Wuv you.

Do you reckon you could clean up the Necroarmor a bit for me? Lot's of transparent pixels, especially around the spikes, way too many for me to feel comfortable editing it myself.

Also, would you like me to put something into DoomRL Arsenal just for you? Could be anything, weapon, armor, boots, set of items, all sorts. Consider it a kind of repayment for all the help you've been giving me.
I'll do it as soon as I can. :)
Wow.. You make me feel an important person! :wub: I'll think about it, and I let you know.

EDIT
Cleaned!
Cleaned!
Blink12.png (3.26 KiB) Viewed 721 times
User avatar
SoloSpaghetti
Posts: 484
Joined: Wed Jun 26, 2013 6:46 am
Location: Pistoia, Italy

Re: [Request] DoomRL Arsenal Contribution Thread

Post by SoloSpaghetti »

Energy Shield12.png
Energy Shield12.png (983 Bytes) Viewed 718 times
Plasma Shield12.png
Plasma Shield12.png (1000 Bytes) Viewed 718 times
Shielded Armor 12.png
Shielded Armor 12.png (1.36 KiB) Viewed 718 times
Only one left! :D
(the only one wich will cause me some trouble.. I have no idea from where to start..)
Post Reply

Return to “Requests”