SLADE Discussion - Latest: v3.2.7 (25/Dec/2024)

Any utility that assists in the creation of mods, assets, etc, go here. For example: Ultimate Doom Builder, Slade, WadSmoosh, Oblige, etc.
Forum rules
The Projects forums are ONLY for YOUR PROJECTS! If you are asking questions about a project, either find that project's thread, or start a thread in the General section instead.

Got a cool project idea but nothing else? Put it in the project ideas thread instead!

Projects for any Doom-based engine (especially 3DGE) are perfectly acceptable here too.

Please read the full rules for more details.
Post Reply
User avatar
ETTiNGRiNDER
Posts: 766
Joined: Sat Jan 30, 2010 7:02 pm
Contact:
Contact ETTiNGRiNDER

Re: SLADE v3.0.2 final Released

Post by ETTiNGRiNDER »

NeuralStunner wrote:Have you tried a clean install?
Doesn't appear to have made a difference.
Top
User avatar
zrrion the insect
Posts: 2432
Joined: Thu Jun 25, 2009 1:58 pm
Location: Time Station 1: Moon of Glendale

Re: SLADE v3.0.2 final Released

Post by zrrion the insect »

I am no longer able to scroll through text with the mouse wheel. I can scroll through the list of things in the wad/pk3, but not text. As far as I know I haven't mucked with anything.
Top
Gez
 
 
Posts: 17938
Joined: Fri Jul 06, 2007 3:22 pm

Re: SLADE v3.0.2 final Released

Post by Gez »

It's something that comes and go, and I've never yet found why.
Top
User avatar
Silentdarkness12
Posts: 1555
Joined: Thu Aug 15, 2013 5:34 pm
Location: Plains of Pride

Re: SLADE v3.0.2 final Released

Post by Silentdarkness12 »

I always get a crash when I try to add a gfx to the patch table.
Top
User avatar
cq75
Posts: 1212
Joined: Sun Dec 27, 2009 9:28 pm
Graphics Processor: nVidia with Vulkan support
Location: Just beyond the line horizon

Re: SLADE v3.0.2 final Released

Post by cq75 »

Spoiler: old, probably useless information
EDIT 2 (08/27/2013) I tried compiling it again today and make gave me an error...

slade make compilation output before commenting out lines

Code: Select all

[me@archlinux dist]$ make
Scanning dependencies of target slade
[  0%] Building CXX object src/CMakeFiles/slade.dir/UndoManagerHistoryPanel.o
/home/me/slade3/slade/src/UndoManagerHistoryPanel.cpp: In constructor ‘UndoManagerHistoryPanel::UndoManagerHistoryPanel(wxWindow*, UndoManager*)’:
/home/me/slade3/slade/src/UndoManagerHistoryPanel.cpp:96:44: error: invalid conversion from ‘int’ to ‘wxListColumnFormat’ [-fpermissive]
  list_levels->AppendColumn("Action", 0, 160);
                                            ^
In file included from /usr/local/include/wx-2.9/wx/listctrl.h:19:0,
                 from /home/me/slade3/slade/src/VirtualListView.h:5,
                 from /home/me/slade3/slade/src/UndoManagerHistoryPanel.h:5,
                 from /home/me/slade3/slade/src/UndoManagerHistoryPanel.cpp:4:
/usr/local/include/wx-2.9/wx/listbase.h:417:10: error:   initializing argument 2 of ‘long int wxListCtrlBase::AppendColumn(const wxString&, wxListColumnFormat, int)’ [-fpermissive]
     long AppendColumn(const wxString& heading,
          ^
make[2]: *** [src/CMakeFiles/slade.dir/UndoManagerHistoryPanel.o] Error 1
make[1]: *** [src/CMakeFiles/slade.dir/all] Error 2
make: *** [all] Error 2
[me@archlinux dist]$
Taking a random guess, I commented the lines I prefixed with "// [75]" in the declaration of UndoManagerHistoryPanel in UndoManagerHistoryPanel.cpp, the function starts for me at around line 80:

With those lines commented out, it compiles and runs.

UndoManagerHistoryPanel.cpp with commented out lines

Code: Select all

//[Line 80]
UndoManagerHistoryPanel::UndoManagerHistoryPanel(wxWindow* parent, UndoManager* manager) : wxPanel(parent, -1)
{
	// Init variables
	this->manager = manager;

	// Setup sizer
	wxBoxSizer* sizer = new wxBoxSizer(wxVERTICAL);
	SetSizer(sizer);

	// Add undo levels list
	list_levels = new UndoListView(this, manager);
	sizer->Add(list_levels, 1, wxEXPAND|wxALL, 4);

// line 97 is here
// [75] trying commenting this out to see if it does anything
// [75] #if (wxMAJOR_VERSION >= 2 && wxMINOR_VERSION >= 9 && wxRELEASE_NUMBER >= 4)
// [75] list_levels->AppendColumn("Action", 0, 160);
// [75]#else
	list_levels->InsertColumn(list_levels->GetColumnCount(), "Action", 0, 160);
// [75] #endif

	list_levels->Bind(wxEVT_COMMAND_LIST_ITEM_RIGHT_CLICK, &UndoManagerHistoryPanel::onItemRightClick, this);
}
If it helps, I'm using WxWidgets 2.9.5. I checked the code out of the SVN on 8-24. I'm running Arch Linux x64.

Sirjuddington/gez, what release version of WxWidgets2.9 do you use? Is there a specific version that has been tested more than others? The wiki just recommends 2.9, it doesn't give a release version.


I have some other things I want to mention:

[possible bug?] If I hit space and draw a normal square sector, the lines are drawn with the front of the lines facing into the sector, which is right.

But if I hit space and start drawing a sector with the first vertex attached to another sector, the lines' fronts are facing out into void space; I can flip the lines, but I'm not sure how to make that into a sector, I don't see a "make new sectors" mode.

Is this not a good way to draw sectors in Slade? I'm going off of my experience with DB2 here, I couldn't find any articles on the slade wiki or the forums about general map editing.

[Bug] If I go into visual mode, hit tab, click on "item properties" on the right, then click again on the 3d view, I can't get out of 3d mode with q unless I bring up the texture select dialog box

[minor suggestion] Possibly have an option to hide AASHITTY/AASTINKY in the texture editor?

[minor tweak] if I try to delete an item, the dialog box has yes/no buttons, if I hit Y or N, it doesn't do anything. Enter does delete it, though.

I've had some crashes related to trying to undo an action done in visual mode in 2d mode (and vice versa), but I'm not sure if it's due to what I commented out, so I won't mention that yet.

Overall the editor looks very nice, and it's great to have something that works on linux.
Top
User avatar
Marisa the Magician
Banned User
Posts: 3886
Joined: Fri Feb 08, 2008 9:15 am
Preferred Pronouns: She/Her
Operating System Version (Optional): (btw I use) Arch
Graphics Processor: nVidia with Vulkan support
Location: Vigo, Galicia
Contact:
Contact Marisa the Magician

Re: SLADE v3.0.2 final Released

Post by Marisa the Magician »

Ah so that's why it didn't build anymore...
Top
User avatar
sirjuddington
Posts: 1030
Joined: Wed Jul 16, 2003 4:47 am
Location: Australia
Contact:
Contact sirjuddington

Re: SLADE v3.0.2 final Released

Post by sirjuddington »

The compilation error should be fixed with the latest changes on github (using 2.9.5 now, generally I try to keep to the latest official release of wx). I'll have a look at those other issues. If you have stack traces for those crashes that would be helpful.
Top
User avatar
sirjuddington
Posts: 1030
Joined: Wed Jul 16, 2003 4:47 am
Location: Australia
Contact:
Contact sirjuddington

Re: SLADE v3.0.2 final Released

Post by sirjuddington »

Just posted a bit of an update over at the SLADE website
Top
User avatar
Xtyfe
Posts: 1490
Joined: Fri Dec 14, 2007 6:29 pm
Preferred Pronouns: He/Him
Operating System Version (Optional): Windows 11
Graphics Processor: nVidia with Vulkan support

Re: SLADE v3.0.2 final Released

Post by Xtyfe »

This is awesome, a real milestone for sure
Top
User avatar
sirjuddington
Posts: 1030
Joined: Wed Jul 16, 2003 4:47 am
Location: Australia
Contact:
Contact sirjuddington

Re: SLADE v3.1.0 Beta 1 Released - first post updated

Post by sirjuddington »

First post updated! Read it and stuff.
Top
User avatar
Xtyfe
Posts: 1490
Joined: Fri Dec 14, 2007 6:29 pm
Preferred Pronouns: He/Him
Operating System Version (Optional): Windows 11
Graphics Processor: nVidia with Vulkan support

Re: SLADE v3.1.0 Beta 1 Released - first post updated

Post by Xtyfe »

Links to the new beta are dead on the download page

Is this the sort of bug I should be reporting? :P
Top
User avatar
sirjuddington
Posts: 1030
Joined: Wed Jul 16, 2003 4:47 am
Location: Australia
Contact:
Contact sirjuddington

Re: SLADE v3.1.0 Beta 1 Released - first post updated

Post by sirjuddington »

Xtyfe wrote:Links to the new beta are dead on the download page

Is this the sort of bug I should be reporting? :P
Fixed :P
Top
User avatar
The Zombie Killer
Posts: 1528
Joined: Thu Jul 14, 2011 12:06 am
Location: Gold Coast, Queensland, Australia

Re: SLADE v3.1.0 Beta 1 Released - first post updated

Post by The Zombie Killer »

I don't wanna look like a complete moron, but how exactly am I supposed to edit/create a map? It won't let me choose what I want to name the map.
EDIT: Nevermind.

-TZK
Top
User avatar
AlphaEnt
Posts: 110
Joined: Fri Mar 13, 2009 9:45 am
Operating System Version (Optional): Windows 10
Graphics Processor: nVidia with Vulkan support
Location: Lost in Buenos Aires, Argentina I think...
Contact:
Contact AlphaEnt

Re: SLADE v3.1.0 Beta 1 Released - first post updated

Post by AlphaEnt »

I have a question: Does the new Slade 3.1.0 includes some kind of "Auto crop" option for sprites with transparent textures? And if it does, it can be done in several textures at the time, like in "batch mode"?

I think it could be nice, since Slade3 is my favourite program and XWE don't have a key for that. Also it must be done over and over again, for each single sprite...

Edit: Nevermind, i've actually figured it out the way, to make XWE auto crop quite faster and automatic...
Last edited by AlphaEnt on Mon Sep 30, 2013 1:37 pm, edited 1 time in total.
Top
User avatar
Matt
Posts: 9696
Joined: Sun Jan 04, 2004 5:37 pm
Preferred Pronouns: They/Them
Operating System Version (Optional): Debian Bullseye
Location: Gotham City SAR, Wyld-Lands of the Lotus People, Dominionist PetroConfederacy of Saudi Canadia
Contact:
Contact Matt

Re: SLADE v3.1.0 Beta 1 Released - first post updated

Post by Matt »

Can't compile, no idea what I'm doing wrong:
Spoiler:
Top
Post Reply

Return to “Creation, Conversion, and Editing”