[Project] "Knee-Deep in ZDoom"

New maps, and other projects whose primary focus is new maps, belong here.

Note: This forum, and all forums below it, are not for questions or troubleshooting! Threads created here are for active projects only! If you have questions please feel free to use the Editing subforums or General forum.
Forum rules
The Projects forums are only for projects. If you are asking questions about a project, either find that project's thread, or start a thread in the General section instead.

Got a cool project idea but nothing else? Put it in the project ideas thread instead!

Projects for any Doom-based engine (especially 3DGE) are perfectly acceptable here too.

Please read the full rules for more details.
User avatar
Ryan Cordell
Posts: 4349
Joined: Sun Feb 06, 2005 6:39 am
Preferred Pronouns: No Preference
Operating System Version (Optional): Windows 10
Graphics Processor: nVidia (Modern GZDoom)
Location: Capital of Explodistan

Post by Ryan Cordell »

Um, isn't it more of a GZDoom wad than anything?

EDIT: Pageclaim! :)
User avatar
Snarboo
Posts: 2599
Joined: Tue Nov 29, 2005 4:37 am

Post by Snarboo »

There's a very minor texture bug at the beginning of Z1M7. Here are some screenshots to illustrate what I mean. These were taken in GZDoom 1.0.24. I apologize for the gamma:
Spoiler:
Hope this helps in some way. :)
User avatar
Enjay
 
 
Posts: 27270
Joined: Tue Jul 15, 2003 4:58 pm
Location: Scotland
Contact:

Post by Enjay »

Heh, yeah, you're right. Well spotted. I also noticed, purely by chance when checking this, that it's possible to avoid activating the dormant monsters. As I ran through the initial opening, the demons rushed me from the right and I dodged to the left. On doing so, I stepped onto the slightly raised bit of rock on the left side of the path and passed by 2 steel pillars on the wrong side before coming back onto the path. When I did, the dark imps and the spectres in the distance just stood there, dormant and in the way.

It all happened in a flash, I wasn't intending to walk around the edge like that. It was just a lucky dodge that took me further off the beaten path than I had intended and my clumsy attempt to get back on again.
User avatar
Virtue
Posts: 919
Joined: Sun Nov 19, 2006 8:15 am
Location: Manchester UK

Post by Virtue »

any help on my problem?
User avatar
Unknown_Assassin
Posts: 2468
Joined: Wed Apr 12, 2006 5:17 pm
Location: Where dead carcasses lie
Contact:

Post by Unknown_Assassin »

GeeDougg wrote:What are you supposed to do at the end of ZE1M8? The boss meter's showing but there's no boss and I have no idea where to go.... The door to the "temple" or whatever it is that's right at the end won't open and there's a pool of lava behind me and no way to get back. I even noclipped and still didn't find anything. Help?
Did you noclip towards the boss?

I don't know what you mean by temple? Do you mean the place where you have to get red, blue, and yellow keycards to get in? If it is that narrow hallway, then you have to wait until the earthquake stops before being able to open the lift.
Kristus wrote:That's highly unlikely since I managed to fire the SSG while the end sequence was running, when I read I usually end up tapping the mouse a bit for some reason. That pretty much scared the crap out of me.
You can still get out the rocket launcher and blast yourself.
Ben2k9 wrote:talking of bugs, every time i play z1m8 i have to noclip to get the yellow key, ive killed every monster and the only place to go is the door with the button at the end of the corridor, the button wont switch and the door wont open, ive looked everywhere, how do you open it?
When you get the blue key and open the blue door, you see two ways and 1 door that requires all keycards to get in. Take a left and keep going straight. You will see a door with a switch. Open that door and continue on from there where the yellow key is located. There is no need to use 'noclip'.
Ben2k9 wrote:also on the very first level i have to clip through the first bloody door to the camera room becuase it wont open on its own :S
What do you mean by camera room? Coordinates, details, or screenshots would be most helpful.
User avatar
Virtue
Posts: 919
Joined: Sun Nov 19, 2006 8:15 am
Location: Manchester UK

Post by Virtue »

Unknown_Assassin wrote:
Ben2k9 wrote:talking of bugs, every time i play z1m8 i have to noclip to get the yellow key, ive killed every monster and the only place to go is the door with the button at the end of the corridor, the button wont switch and the door wont open, ive looked everywhere, how do you open it?
When you get the blue key and open the blue door, you see two ways and 1 door that requires all keycards to get in. Take a left and keep going straight. You will see a door with a switch. Open that door and continue on from there where the yellow key is located. There is no need to use 'noclip'.
Ben2k9 wrote:also on the very first level i have to clip through the first bloody door to the camera room becuase it wont open on its own :S
What do you mean by camera room? Coordinates, details, or screenshots would be most helpful.
Z1M8: as i said, the door with the switch doesnt work, the switch is non responsive.

Z1M1: and yes the very first door, again, i cant open it
User avatar
Vader
Posts: 4241
Joined: Fri Jul 30, 2004 4:00 am
Location: Germany

Post by Vader »

The switch doesn't open the door, it activates/deactivates the forcefields!
Have you even tried pressing use on the door itself?

In Z1M1, there is a switch next to the camera texture... it opens the door!
LogicDeLuxe
Posts: 198
Joined: Mon Apr 26, 2004 11:32 am

Post by LogicDeLuxe »

Vader wrote:In Z1M1, there is a switch next to the camera texture... it opens the door!
To be exact, it opens the second door you'll see from the start on, not the very first.
If you find it hard to locate that switch, the rest of the episode would be very frustating, I guess. This particular switch isn't even hidden in a dark corner.
User avatar
Unknown_Assassin
Posts: 2468
Joined: Wed Apr 12, 2006 5:17 pm
Location: Where dead carcasses lie
Contact:

Post by Unknown_Assassin »

Ben2k9 wrote:Z1M8: as i said, the door with the switch doesnt work, the switch is non responsive.
I didn't say to press the switch. I said the door with the switch. You should be able to open that door without a switch.
User avatar
Virtue
Posts: 919
Joined: Sun Nov 19, 2006 8:15 am
Location: Manchester UK

Post by Virtue »

Z1M1: i cant open the door to the camera room

Z1M8: both the door and the switch dont work.
User avatar
Unknown_Assassin
Posts: 2468
Joined: Wed Apr 12, 2006 5:17 pm
Location: Where dead carcasses lie
Contact:

Post by Unknown_Assassin »

Ben2k9 wrote:Z1M1: i cant open the door to the camera room

Z1M8: both the door and the switch dont work.
Hmm... I didn't have this problem. Perhaps it is the Zdoom version. Which version are you using?
User avatar
Enjay
 
 
Posts: 27270
Joined: Tue Jul 15, 2003 4:58 pm
Location: Scotland
Contact:

Post by Enjay »

Just to make sure we are talking about the same thing here - because I can't see anything unusual in the first few areas of Z1M1 - is one of the doors you are having problems with featured in this video?

http://www.zen64060.zen.co.uk/kdizd-doors.wmv
User avatar
Virtue
Posts: 919
Joined: Sun Nov 19, 2006 8:15 am
Location: Manchester UK

Post by Virtue »

Enjay wrote:Just to make sure we are talking about the same thing here - because I can't see anything unusual in the first few areas of Z1M1 - is one of the doors you are having problems with featured in this video?

http://www.zen64060.zen.co.uk/kdizd-doors.wmv
yes, its the first door you open, not the locked door you open in the camera room, i have no idea why it just doesnt open!!?
User avatar
Enjay
 
 
Posts: 27270
Joined: Tue Jul 15, 2003 4:58 pm
Location: Scotland
Contact:

Post by Enjay »

Strange. There's nothing particularly unusual about that door at all. It should just work when you press your usual "use" button.

There is a line type 121 right in front of the door with lineid set to 0 and arg1 set to 1. I don't know why it's there, but I don't see why that would affect the door anyway.
User avatar
InsanityBringer
Posts: 3392
Joined: Thu Jul 05, 2007 4:53 pm
Location: opening the forbidden box

Post by InsanityBringer »

In the compatibility menu, check "All special lines can block <use>". It it is yes, then turn it off.
Post Reply

Return to “Levels”