Ultimate Doom Builder

Any utility that assists in the creation of mods, assets, etc, go here. For example: Ultimate Doom Builder, Slade, WadSmoosh, Oblige, etc.
Forum rules
The Projects forums are ONLY for YOUR PROJECTS! If you are asking questions about a project, either find that project's thread, or start a thread in the General section instead.

Got a cool project idea but nothing else? Put it in the project ideas thread instead!

Projects for any Doom-based engine (especially 3DGE) are perfectly acceptable here too.

Please read the full rules for more details.
User avatar
Darkcrafter
Posts: 571
Joined: Sat Sep 23, 2017 8:42 am
Preferred Pronouns: He/Him
Operating System Version (Optional): Windows 10
Graphics Processor: nVidia with Vulkan support

Re: Ultimate Doom Builder

Post by Darkcrafter »

phantombeta wrote: Sun Aug 07, 2022 10:31 pm
Darkcrafter wrote: Sun Aug 07, 2022 5:26 pm Updated to v3.0.0.3980 (692ceb7) and seems like I'm rolling back from this one because need to load gzdoom.pk3 into map resources and then having to remove it when testing (reload the map before testing lol). because gzdoom won't run if gzdoom.pk3 is in the map resources.
You just have to mark the resource as not being loaded for testing. It's the checkbox at the bottom of the "browse WAD/PK3/Folder" window.
But that's additional and unwanted work to add gzdoom.pk3 into the resource list. What I'd like to propose is to bundle Ultimate Doom Builder with that gzdoom.pk3 file that will load everytime without any hassle, is there any sort of licensing issue that make a hurdle for that?
boris
Posts: 753
Joined: Tue Jul 15, 2003 3:37 pm

Re: Ultimate Doom Builder

Post by boris »

You have to add it once. It will not be bundled with UDB, that just doesn't make sense at all.
doomzie
Posts: 94
Joined: Sat Apr 30, 2022 4:26 am

Re: Ultimate Doom Builder

Post by doomzie »

Boris,

How do you access the Visplane Explorer in UDB ? The plugin .dll is present, but I can't find any reference in UDB. Also, are there any plugins that are not included with the UDB install? I've looked around and all I could find were some old plugins that are most likely deprecated (or already included). I just want to be sure that I'm not missing out on something.

Also, I would like to know what is your preferred way to report a bug? Do I need to do this on github? It concerns using directories as resource locations. UDB ignores the .pk3 files inside that directory.
boris
Posts: 753
Joined: Tue Jul 15, 2003 3:37 pm

Re: Ultimate Doom Builder

Post by boris »

Visplane Explorer is only enabled for Doom and Hexen format maps. So if you're making a UDMF map it won't be there.

There are basically no thrid party plugins around (that I'm aware of).

GitHub is the preferred way to report bugs.
doomzie
Posts: 94
Joined: Sat Apr 30, 2022 4:26 am

Re: Ultimate Doom Builder

Post by doomzie »

boris wrote: Thu Sep 01, 2022 11:16 am Visplane Explorer is only enabled for Doom and Hexen format maps. So if you're making a UDMF map it won't be there.
I see, okay. Does this mean it's not relevant for UDMF format or it just doesn't exist for UDMF ?
User avatar
axredneck
Posts: 391
Joined: Mon Dec 11, 2017 2:09 pm
Preferred Pronouns: He/Him
Operating System Version (Optional): Arch
Graphics Processor: nVidia with Vulkan support
Location: Russia

Re: Ultimate Doom Builder

Post by axredneck »

Yes, it's not relevant for UDMF. More precisely, it's not relevant for any port that supports UDMF.
User avatar
Mush256
Posts: 12
Joined: Tue May 31, 2022 2:05 pm
Graphics Processor: ATI/AMD with Vulkan/Metal Support
Location: Czech Republic

Re: Ultimate Doom Builder

Post by Mush256 »

Hey, just wanted to ask if it's possible to make a hudmessage that you can skip message by message (not the whole thing) by pressing a key (like e). I tried to do it but I failed miserably.
doomzie
Posts: 94
Joined: Sat Apr 30, 2022 4:26 am

Re: Ultimate Doom Builder

Post by doomzie »

axredneck wrote: Fri Sep 02, 2022 8:01 am Yes, it's not relevant for UDMF. More precisely, it's not relevant for any port that supports UDMF.
Ok, good to know, thanks for confirming!
Casualfan
Posts: 95
Joined: Fri Jan 14, 2022 8:31 pm

Re: Ultimate Doom Builder

Post by Casualfan »

I downloaded this again, and every time I try to load a map it immediately closes with no error message. I read on GitHub that it was struggling to work on Windows 11. Has anyone else ran into this?

I'm trying to run it on Windows 11. I've tried running it as the administrator and it didn't change anything. What other info would I need to troubleshoot this?
boris
Posts: 753
Joined: Tue Jul 15, 2003 3:37 pm

Re: Ultimate Doom Builder

Post by boris »

Downgrade your GPU drivers or wait for AMD to fix them.
Casualfan
Posts: 95
Joined: Fri Jan 14, 2022 8:31 pm

Re: Ultimate Doom Builder

Post by Casualfan »

boris wrote: Wed Sep 07, 2022 3:35 pm Downgrade your GPU drivers or wait for AMD to fix them.
That fixed it, thanks for your help!
User avatar
Mikk-
Posts: 2274
Joined: Tue Jun 30, 2009 1:31 pm

Re: Ultimate Doom Builder

Post by Mikk- »

Would it be possible to have editor keys similar to the ArgN* keys, but for user variables? It would be so useful when having custom actors that require lots of customisation. Especially the enum options.
User avatar
Wiw
Posts: 768
Joined: Thu Jun 11, 2015 1:58 am
Graphics Processor: nVidia with Vulkan support
Location: Everywhere and nowhere.

Re: Ultimate Doom Builder

Post by Wiw »

Avast One keeps recognising the updates as suspicious files and gets rid of them! It's driving me crazy!
User avatar
Lars
Posts: 48
Joined: Fri Dec 17, 2004 12:46 pm
Location: Denmark

Re: Ultimate Doom Builder

Post by Lars »

Avast probably have an exception function, try that
peewee_RotA
Posts: 394
Joined: Fri Feb 07, 2014 6:45 am

Re: Ultimate Doom Builder

Post by peewee_RotA »

Updated UDB for the first time in about 3 months and now my custom game configuration has zscript errors.

Code: Select all

ZSCRIPT error in "xrpg\zscript\XRpgPlayer.zs:4", line 9. Fatal: Class "XRpgPlayer" is trying to inherit from "playerpawn" which does not exist..
ZSCRIPT error in "xrpg\zscript.zs", line 47. Already parsed "zscript/XRpgSpellItem.zs". Check your include directives.
Failed to apply MAPINFO DoomEdNum override "5 = zwingedstatue": failed to find corresponding actor class...
(285 more mapinfo warnings)
Prior to update I've never had errors or warnings. Nothing in the game configuration changed. Nothing in the mod or map changed.

I have a custom game configuration file to include thing and key array lists (I posted in an earlier thread about using it to fix key numbers to no avail). That has not changed.

Custom things defined in the mapinfo and game config are still showing in the 3d view, so it looks like all of these errors and warnings are not indicating actual problems.

EDIT:

All map info entries for HEXEN's base items are in the mapinfo warnings (showing up before things defined in the mod). These hexen mapinfo numbers are not redefined in the mod, they must be failing from the base game.

Return to “Creation, Conversion, and Editing”