Resource Request thread *Read 1st post*
Forum rules
The Projects forums are only for projects. If you are asking questions about a project, either find that project's thread, or start a thread in the General section instead.
Got a cool project idea but nothing else? Put it in the project ideas thread instead!
Projects for any Doom-based engine (especially 3DGE) are perfectly acceptable here too.
Please read the full rules for more details.
The Projects forums are only for projects. If you are asking questions about a project, either find that project's thread, or start a thread in the General section instead.
Got a cool project idea but nothing else? Put it in the project ideas thread instead!
Projects for any Doom-based engine (especially 3DGE) are perfectly acceptable here too.
Please read the full rules for more details.
-
-
- Posts: 26561
- Joined: Tue Jul 15, 2003 4:58 pm
- Location: Scotland
Re: Resource Request thread *Read 1st post*
Does anyone have a beating heart sprite? I want to use it as a decoration in a human sacrifice scene in a map.
Currently I am using the one from Doom (the one that normally sits on top of a green marble pillar). It's OK and does what I want (just sits there beating). The size is right but I wouldn't mind something a little bit bigger/more detailed that I could scale down to the same size. It needs lo look the correct size for a human the size of the Doomguy sprites and not look totally out of place alongside other sprites. So, I don't need anything HUGE, just a bit bigger with a bit more detail.
Edit: Also, has anyone ever made an impaled version of the Strife rebels? Like the Doom zombies on poles, but Strife rebels instead.
Edit 2: I just found impaled Strife rebels on Real667. Still looking for a heart though.
Currently I am using the one from Doom (the one that normally sits on top of a green marble pillar). It's OK and does what I want (just sits there beating). The size is right but I wouldn't mind something a little bit bigger/more detailed that I could scale down to the same size. It needs lo look the correct size for a human the size of the Doomguy sprites and not look totally out of place alongside other sprites. So, I don't need anything HUGE, just a bit bigger with a bit more detail.
Edit: Also, has anyone ever made an impaled version of the Strife rebels? Like the Doom zombies on poles, but Strife rebels instead.
Edit 2: I just found impaled Strife rebels on Real667. Still looking for a heart though.
-
- Posts: 36
- Joined: Fri Dec 07, 2018 7:24 am
- Preferred Pronouns: He/Him
- Location: Republic of Korea
Re: Resource Request thread *Read 1st post*
Please someone find this sprites?
klack todgud NUKE's Sprites
viewtopic.php?f=4&t=15080&start=36270
It seems that the photos were deleted when the account left imgur.
I could only get JPG files, Who has the PNG files?
Snarboo's Lever Action? Rifle (id Software, Snarboo)
Found from Polaris - The Gift(rslpolar.wad)
https://www.doomworld.com/idgames/combos/rslpolar
This stuff has been edited(cut off the bottom, custom palette), I wonder where I can get the original sprite.
klack todgud NUKE's Sprites
viewtopic.php?f=4&t=15080&start=36270
It seems that the photos were deleted when the account left imgur.
I could only get JPG files, Who has the PNG files?
Snarboo's Lever Action? Rifle (id Software, Snarboo)
Found from Polaris - The Gift(rslpolar.wad)
https://www.doomworld.com/idgames/combos/rslpolar
This stuff has been edited(cut off the bottom, custom palette), I wonder where I can get the original sprite.
-
- Posts: 2059
- Joined: Mon Feb 07, 2011 5:02 am
Re: Resource Request thread *Read 1st post*
I got somting for ya!
If only I ever remembered to bloody note down who made them...
looks like I must have grabbed these three when they were posted... I have extrensive libraries of forum rips! If only I ever remembered to bloody note down who made them...
You do not have the required permissions to view the files attached to this post.
-
- Posts: 2059
- Joined: Mon Feb 07, 2011 5:02 am
Re: Resource Request thread *Read 1st post*
well, my brain went straight to this from SW: but I take it this is too big then?Enjay wrote:Does anyone have a beating heart sprite? I want to use it as a decoration in a human sacrifice scene in a map.
Currently I am using the one from Doom (the one that normally sits on top of a green marble pillar). It's OK and does what I want (just sits there beating). The size is right but I wouldn't mind something a little bit bigger/more detailed that I could scale down to the same size. It needs lo look the correct size for a human the size of the Doomguy sprites and not look totally out of place alongside other sprites. So, I don't need anything HUGE, just a bit bigger with a bit more detail.
Edit: Also, has anyone ever made an impaled version of the Strife rebels? Like the Doom zombies on poles, but Strife rebels instead.
Edit 2: I just found impaled Strife rebels on Real667. Still looking for a heart though.
I figured you'd have thought of this already is all..?
You do not have the required permissions to view the files attached to this post.
-
- Posts: 248
- Joined: Sat Jun 22, 2019 9:12 am
- Graphics Processor: Intel (Modern GZDoom)
- Location: Gone.
Re: Resource Request thread *Read 1st post*
Does anyone have the Arch-Vile version of this sprite? viewtopic.php?f=37&t=25657&start=45#p490082
And who do I credit for it?
And who do I credit for it?
-
-
- Posts: 26561
- Joined: Tue Jul 15, 2003 4:58 pm
- Location: Scotland
Re: Resource Request thread *Read 1st post*
I probably do have it in as much as I have Shadow Warrior, but I honestly hadn't realised/remembered that was in there. With a bit of tweaking and scaling, it could well do the job. Thanks very much for the suggestion.osjclatchford wrote:well, my brain went straight to this from SW:but I take it this is too big then?
-
- Posts: 394
- Joined: Fri Feb 07, 2014 6:45 am
Re: Resource Request thread *Read 1st post*
Do you mean the Diabolist? I believe the monsters in that thread are available here:Craneo wrote:Does anyone have the Arch-Vile version of this sprite? viewtopic.php?f=37&t=25657&start=45#p490082
And who do I credit for it?
https://www.realm667.com/index.php/en/b ... preview-26
-
- Posts: 248
- Joined: Sat Jun 22, 2019 9:12 am
- Graphics Processor: Intel (Modern GZDoom)
- Location: Gone.
Re: Resource Request thread *Read 1st post*
I was talking about the headshot sprite, I already knew about the Diabolist as a monster lol, just a version of that Diabolist death sprite but with a normal Arch-Vile instead, sorry for my poor wordingpeewee_RotA wrote:Do you mean the Diabolist? I believe the monsters in that thread are available here:Craneo wrote:Does anyone have the Arch-Vile version of this sprite? viewtopic.php?f=37&t=25657&start=45#p490082
And who do I credit for it?
https://www.realm667.com/index.php/en/b ... preview-26
-
- Posts: 1748
- Joined: Fri Sep 23, 2005 9:17 am
- Location: Czech Republic
Re: Resource Request thread *Read 1st post*
Try checking Project Brutality
-
- Posts: 36
- Joined: Fri Dec 07, 2018 7:24 am
- Preferred Pronouns: He/Him
- Location: Republic of Korea
Re: Resource Request thread *Read 1st post*
Thanks a lot!osjclatchford wrote:I got somting for ya!
looks like I must have grabbed these three when they were posted... I have extrensive libraries of forum rips!
If only I ever remembered to bloody note down who made them...
It's sad to see good sprites disappear.
Still, if someone has it, it can be saved at any time.
-
- Posts: 1
- Joined: Sun Apr 24, 2022 1:40 pm
Re: Resource Request thread *Read 1st post*
hi Im new so forgive me if I have done something to offend.
I would like to make a request for hand sprites for doom and doom 2
I was wondering if some could make hand sprite for doom guy that adds arm guards and black gloves like the one in quake champions
and add the arm guards and gloves to the third person sprite.
I never liked how his arms were completely exposed, am im asking if someone could make sprites.
also make the third person sprite with the arm guards and gloves.
This is my first time posting, so im sorry if something seems off
thank you
I would like to make a request for hand sprites for doom and doom 2
I was wondering if some could make hand sprite for doom guy that adds arm guards and black gloves like the one in quake champions
and add the arm guards and gloves to the third person sprite.
I never liked how his arms were completely exposed, am im asking if someone could make sprites.
also make the third person sprite with the arm guards and gloves.
This is my first time posting, so im sorry if something seems off
thank you
-
- Posts: 23
- Joined: Fri Jun 17, 2016 10:41 pm
- Location: Nexus of All Realities
Re: Resource Request thread *Read 1st post*
I'm not hopeful for anything, but was kinda hoping to get ahold of, sprite-wise, the chaingun-enemy and the samurai enemy from the craptacular 'Fortress of Dr. Radiaki'. Would like to have them for a slowly-developing project.
-
- Posts: 5
- Joined: Sun Apr 17, 2022 10:16 am
Re: Resource Request thread *Read 1st post*
[quote="ljwon_1"]Please someone find this sprites?
klack todgud NUKE's Sprites
I have a PNG version of the Mac-10 saved, here it is. As for the lever action and the others, I don't have anything. Although I think you may be able to piece together a recreation of the lever action from the alpha doom weapon sprites since it uses a lot of parts from those (barrel, stock, etc.)
klack todgud NUKE's Sprites
I have a PNG version of the Mac-10 saved, here it is. As for the lever action and the others, I don't have anything. Although I think you may be able to piece together a recreation of the lever action from the alpha doom weapon sprites since it uses a lot of parts from those (barrel, stock, etc.)
You do not have the required permissions to view the files attached to this post.
-
- Posts: 5
- Joined: Sun Apr 17, 2022 10:16 am
Re: Resource Request thread *Read 1st post*
I recall someone on the spriting carnival managed to rip The Ripper (unintentional pun) from Fallout but I forgot who made it. I'm aware that there's a larger chainsaw variant called The Ripper in DoomRL but that's a different weapon which happens to be the same name.
Last edited by DiR on Thu May 19, 2022 10:59 pm, edited 1 time in total.
-
- Posts: 36
- Joined: Fri Dec 07, 2018 7:24 am
- Preferred Pronouns: He/Him
- Location: Republic of Korea
Re: Resource Request thread *Read 1st post*
I'm sorry, I'm late to check.DiR wrote:As for the lever action and the others, I don't have anything. Although I think you may be able to piece together a recreation of the lever action from the alpha doom weapon sprites since it uses a lot of parts from those (barrel, stock, etc.)
Sometimes we don't get what we want compared to our efforts.
Anyway, thank you for letting me know.