Goddamn this rules.DenisBelmondo wrote:
gave up on the chaingun lmfao
[SPRITES] Spriting Carnival!!
- Kinsie
- Posts: 7402
- Joined: Fri Oct 22, 2004 9:22 am
- Graphics Processor: nVidia with Vulkan support
- Location: MAP33
- Contact:
Re: [SPRITES] Spriting Carnival!!
- TommyGalano5
- Posts: 132
- Joined: Thu Aug 06, 2020 4:53 am
- Graphics Processor: Intel (Modern GZDoom)
- Location: An Archipelago in Asia
- Contact:
Re: [SPRITES] Spriting Carnival!!
Well well well if it isn't Corporal. Shepard
- Wereknight
- Posts: 85
- Joined: Mon May 06, 2019 12:06 am
- Graphics Processor: nVidia with Vulkan support
- Location: Void Eternal
- Contact:
Re: [SPRITES] Spriting Carnival!!
oh come on it doesn't look that bad eitherDenisBelmondo wrote:
gave up on the chaingun lmfao
- chronoteeth
- Posts: 2664
- Joined: Wed Sep 08, 2004 1:29 pm
- Preferred Pronouns: It/Its
Re: [SPRITES] Spriting Carnival!!
this is a great looking m16! but some things just got me weird feelin, hope u dont mind me doin some tweaks!klack todgud NUKE wrote:Merica 16
-shrunk the back half to be more in line with the front half
-reline shadowed some reflections
-made the under barrel aim more at the center than up
-added a teeny front barrel
-a hand to fit!
hope its okay c:
- Attachments
-
- 1280px-Transgender_Pride_flag.svg.png (18.75 KiB) Viewed 2706 times
Re: [SPRITES] Spriting Carnival!!
I love the pistol and machinegun, looks very fitting of the Mac-style. I'd say finish it.DenisBelmondo wrote:
gave up on the chaingun lmfao
Re: [SPRITES] Spriting Carnival!!
These are gorgeousDenisBelmondo wrote:gave up on the chaingun lmfao
Re: [SPRITES] Spriting Carnival!!
Awesome job!TommyGalano5 wrote:Hey everyone did you see Gordon Freeman?

Woa, i must thank you for that!TommyGalano5 wrote:I'm just going to post this here might be useful for spriters/modders alike
Full rotation ADS Marine
Credz: id Software, Matt, Solo_Spaghetti

STOP!DOOMPiter wrote:Noooo.TommyGalano5 wrote:Hey everyone did you see Gordon Freeman?
Re: [SPRITES] Spriting Carnival!!
Hey, what app are you using? I've been looking for a good android app to draw Doom stuff for ages!TommyGalano5 wrote:Well well well if it isn't Corporal. Shepard
- TommyGalano5
- Posts: 132
- Joined: Thu Aug 06, 2020 4:53 am
- Graphics Processor: Intel (Modern GZDoom)
- Location: An Archipelago in Asia
- Contact:
Re: [SPRITES] Spriting Carnival!!
What app I'm using is IbisPaintX I hope that it may help you and also Reloading Marine.Z.Franz wrote:Hey, what app are you using? I've been looking for a good android app to draw Doom stuff for ages!TommyGalano5 wrote:Well well well if it isn't Corporal. Shepard
Credz: Bewtual Dewm
- Attachments
-
- Where did you throw the Magazine!?
- Untitled161_20210520094544.png (18.7 KiB) Viewed 2406 times
-
- Posts: 394
- Joined: Mon May 09, 2016 1:38 am
- Location: Anywhere but here
- Contact:
Re: [SPRITES] Spriting Carnival!!

A further development on the centred M40A1 I may have posted a while back, this time making a sort of attempt at "re-modernizing" the British L42A1 (which was a sportized mag-fed Enfield MK 4 in 7.62 for use as a Police/Service Sniper before it was replaced with the L96A1 in the 1990s) It is specifically based on this image I made (https://imgur.com/dpkaZvM) by combining it with the M24/M40A1, basically a L42A1 in .338 Lapua Magnum, straight-pull bolt, and fibreglass furniture for greater field survivability in jungles and stuff.
Why the L42A1? I just think it's a cool weapon that got cut short of any decent shared weapon system successors by the Arctic Warfare rifles, also because the L42A1 appears in Manhunt as the Cerberus and Carcer City PD as their standard Sniper Rifle (also the big reason the L42A1 I sprited has the red scope lenses is because Cerberus have red tints for their goggles)
As for why the UAC and Marines would be using such a thing, no idea, realistically a Remington 700 or AWM derivative would be used instead, though I'm sure someone could point out what'd be better in the M40 vs L42A1 department.
- TommyGalano5
- Posts: 132
- Joined: Thu Aug 06, 2020 4:53 am
- Graphics Processor: Intel (Modern GZDoom)
- Location: An Archipelago in Asia
- Contact:
Re: [SPRITES] Spriting Carnival!!
Ahh yeah! Just what I needXLightningStormL wrote:
A further development on the centred M40A1 I may have posted a while back, this time making a sort of attempt at "re-modernizing" the British L42A1 (which was a sportized mag-fed Enfield MK 4 in 7.62 for use as a Police/Service Sniper before it was replaced with the L96A1 in the 1990s) It is specifically based on this image I made (https://imgur.com/dpkaZvM) by combining it with the M24/M40A1, basically a L42A1 in .338 Lapua Magnum, straight-pull bolt, and fibreglass furniture for greater field survivability in jungles and stuff.
Why the L42A1? I just think it's a cool weapon that got cut short of any decent shared weapon system successors by the Arctic Warfare rifles, also because the L42A1 appears in Manhunt as the Cerberus and Carcer City PD as their standard Sniper Rifle (also the big reason the L42A1 I sprited has the red scope lenses is because Cerberus have red tints for their goggles)
As for why the UAC and Marines would be using such a thing, no idea, realistically a Remington 700 or AWM derivative would be used instead, though I'm sure someone could point out what'd be better in the M40 vs L42A1 department.
Also SOON™
- A_D_M_E_R_A_L
- Posts: 308
- Joined: Sun Apr 16, 2017 2:55 am
- Preferred Pronouns: He/Him
- Captain J
-
- Posts: 16891
- Joined: Tue Oct 02, 2012 2:20 am
- Location: An ancient Escape Shuttle(No longer active here anymore)
- Contact:
Re: [SPRITES] Spriting Carnival!!
I approve!!TommyGalano5 wrote:Ahh yeah! Just what I need
Also SOON™
Re: [SPRITES] Spriting Carnival!!
I just love this thread 

- Canned Yams
- Posts: 98
- Joined: Mon Feb 04, 2019 6:12 pm
- Location: everywhere
Re: [SPRITES] Spriting Carnival!!
been a while fellas, made this with a model i made a while back and figured i'd post it here lol. not doing much spriting nowadays so i wont really do more with it but if anyone wants to use this as a base gopher it (:
- Attachments
-
- sable1.png (3.28 KiB) Viewed 2014 times