WadSmoosh - merge all official id releases into one PK3 IWAD

Any utility that assists in the creation of mods, assets, etc, go here. For example: Ultimate Doom Builder 2, Slade, WadSmoosh, etc.
Forum rules
The Projects forums are ONLY for YOUR PROJECTS! If you are asking questions about a project, either find that project's thread, or start a thread in the General section instead.

Got a cool project idea but nothing else? Put it in the project ideas thread instead!

Projects for any Doom-based engine (especially 3DGE) are perfectly acceptable here too.

Please read the full rules for more details.
TheArchvile
Posts: 15
Joined: Mon Mar 09, 2020 9:40 am

Re: WadSmoosh - merge all official id releases into one PK3

Post by TheArchvile »

JPL, this is not really a bug per se, but more of an oversight that you probably didn't bother adding because it is very minimal and almost silly. For E1M10 (the infamous secret map Sewers for UD), it has been written on both Doom wiki and Doom fandom that the blood splat actually appears outside of the boundaries of the map. If you were to add it on a future update, where would you place it?

Also, the update works wonders, excellent work!
User avatar
Xerenogan
Posts: 13
Joined: Sat Jul 04, 2020 7:28 am
Graphics Processor: nVidia with Vulkan support
Location: Lojbanistan

Re: WadSmoosh - merge all official id releases into one PK3

Post by Xerenogan »

Thank you so much for this. I, at first heard of it in my periphery but discounted it for too long. This has just replaced doom2 as my default wad.
I know the stance on unofficial wads (which I agree with), but to those who are interested, I was able to get the "lost episodes" working after a fashion. The script update back there has some problems with my setup. That's fine. For those using the old scrips for incorporating "the lost episodes" , in the "wadsmoosh_data.py" that you included, you are missing a comma at the end of line 48.

The rest of it though, is outstanding. The script is easy to change. I really like the constant support over the years, though I just found out about it today. I was missing out.

No problems yet. Will let you know.
Thank you so much for this JP. Good job!
strangebit
Posts: 8
Joined: Thu Apr 23, 2020 10:46 pm

Re: WadSmoosh - merge all official id releases into one PK3

Post by strangebit »

I was just looking at the zscript code and I noticed that DoDoom1PoisonTextureReplacements() will never be called if there's a custom sky (if CheckSkyOverriden() returns true), because of the early return statements in the WorldLoaded event handler. I don't understand the custom sky stuff so maybe I'm wrong, but on the surface it doesn't look intentional to me, so just letting you know. :mrgreen:

Code: Select all

    override void WorldLoaded(WorldEvent e)
    {
        if ( CVar.FindCVar("ws_finaldoom_texswap").GetBool() )
            DoFinalDoomTextureReplacements();
        if ( CVar.FindCVar("ws_d2sky_compat").GetBool() )
        {
            if ( CheckSkyOverriden("RSKY1", "SKY1") )
                return;
            else if ( CheckSkyOverriden("RSKY2", "SKY2") )
                return;
            CheckSkyOverriden("RSKY3", "SKY3");
        }
        if ( CVar.FindCVar("ws_d1pois_texswap").GetBool() )
            DoDoom1PoisonTextureReplacements();
    }
Gez
 
 
Posts: 17653
Joined: Fri Jul 06, 2007 3:22 pm

Re: WadSmoosh - merge all official id releases into one PK3

Post by Gez »

strangebit wrote:I was just looking at the zscript code and I noticed that DoDoom1PoisonTextureReplacements() will never be called if there's a custom sky (if CheckSkyOverriden() returns true), because of the early return statements in the WorldLoaded event handler. I don't understand the custom sky stuff so maybe I'm wrong, but on the surface it doesn't look intentional to me, so just letting you know. :mrgreen:
The sky checks are for whether the level's regular sky is RSKY1/2/3 and a custom SKY1/2/3 is provided. In other words, they'll only return true when in a Doom II level. When in a Ultimate Doom level, they will return false and therefore won't trigger the early returns, and the Doom1Poison function only works in Ult. Doom levels.

So it should work fine.
strangebit
Posts: 8
Joined: Thu Apr 23, 2020 10:46 pm

Re: WadSmoosh - merge all official id releases into one PK3

Post by strangebit »

Gez wrote:
strangebit wrote:I was just looking at the zscript code and I noticed that DoDoom1PoisonTextureReplacements() will never be called if there's a custom sky (if CheckSkyOverriden() returns true), because of the early return statements in the WorldLoaded event handler. I don't understand the custom sky stuff so maybe I'm wrong, but on the surface it doesn't look intentional to me, so just letting you know. :mrgreen:
The sky checks are for whether the level's regular sky is RSKY1/2/3 and a custom SKY1/2/3 is provided. In other words, they'll only return true when in a Doom II level. When in a Ultimate Doom level, they will return false and therefore won't trigger the early returns, and the Doom1Poison function only works in Ult. Doom levels.

So it should work fine.
Ah, I didn't realize. :thumb:
Yarn366
Posts: 57
Joined: Fri Mar 02, 2018 11:48 pm

Re: WadSmoosh - merge all official id releases into one PK3

Post by Yarn366 »

I noticed that, for Master Levels and Final Doom, WadSmoosh uses FLOOR7_2 for the border graphic; they should use GRNROCK instead. (Doom 1, Doom 2, Sigil, and No Rest for the Living all use the correct border graphic.)
User avatar
JPL
 
 
Posts: 517
Joined: Mon Apr 09, 2012 12:27 pm

Re: WadSmoosh - merge all official id releases into one PK3

Post by JPL »

Yarn366 wrote:I noticed that, for Master Levels and Final Doom, WadSmoosh uses FLOOR7_2 for the border graphic; they should use GRNROCK instead. (Doom 1, Doom 2, Sigil, and No Rest for the Living all use the correct border graphic.)
Good catch, I didn't know about the "BorderTexture" MAPINFO property. Final Doom is an easy obvious fix. Is the use of GRNROCK for the Master Levels border based on the Playstation version?
Yarn366
Posts: 57
Joined: Fri Mar 02, 2018 11:48 pm

Re: WadSmoosh - merge all official id releases into one PK3

Post by Yarn366 »

JPL wrote:Is the use of GRNROCK for the Master Levels border based on the Playstation version?
No, it's based on the PC version.
User avatar
JPL
 
 
Posts: 517
Joined: Mon Apr 09, 2012 12:27 pm

Re: WadSmoosh - merge all official id releases into one PK3

Post by JPL »

Yarn366 wrote:
JPL wrote:Is the use of GRNROCK for the Master Levels border based on the Playstation version?
No, it's based on the PC version.
Since the Master Levels run off Doom 2 wouldn't they use the same border graphic as Doom 2?
Yarn366
Posts: 57
Joined: Fri Mar 02, 2018 11:48 pm

Re: WadSmoosh - merge all official id releases into one PK3

Post by Yarn366 »

JPL wrote:
Yarn366 wrote:
JPL wrote:Is the use of GRNROCK for the Master Levels border based on the Playstation version?
No, it's based on the PC version.
Since the Master Levels run off Doom 2 wouldn't they use the same border graphic as Doom 2?
Yes, they do. In vanilla, Doom 2 and Final Doom use GRNROCK, while Doom 1 uses FLOOR7_2. Mods use the same border graphics as their base games unless they replace the texture.
User avatar
JPL
 
 
Posts: 517
Joined: Mon Apr 09, 2012 12:27 pm

Re: WadSmoosh - merge all official id releases into one PK3

Post by JPL »

Yarn366 wrote: Yes, they do. In vanilla, Doom 2 and Final Doom use GRNROCK, while Doom 1 uses FLOOR7_2. Mods use the same border graphics as their base games unless they replace the texture.
Okay, so everything except Ultimate Doom and Sigil should use GRNROCK, and those two (5 episodes) should use FLOOR7_2. It looks like Doom 2 was not in fact showing up correctly, then. I just confirmed it now works as it does with the vanilla IWADs.
Yarn366
Posts: 57
Joined: Fri Mar 02, 2018 11:48 pm

Re: WadSmoosh - merge all official id releases into one PK3

Post by Yarn366 »

JPL wrote:
Yarn366 wrote: Okay, so everything except Ultimate Doom and Sigil should use GRNROCK, and those two (5 episodes) should use FLOOR7_2. It looks like Doom 2 was not in fact showing up correctly, then. I just confirmed it now works as it does with the vanilla IWADs.
Doom 2 (minus the secret levels, which are defined in a different file) and No Rest for the Living actually were using the correct border because block was at the top of doom2_levels.txt:

Code: Select all

adddefaultmap
{
	BorderTexture = "GRNROCK"
}
The "adddefaultmap" block sets properties for all maps in the file that come after the block. So, for instance, if every map in a file should have a certain properties, you can place those properties in a single "adddefaultmap" block at the beginning of the file rather than in every map definition.
User avatar
JPL
 
 
Posts: 517
Joined: Mon Apr 09, 2012 12:27 pm

Re: WadSmoosh - merge all official id releases into one PK3

Post by JPL »

Yarn366 wrote: The "adddefaultmap" block sets properties for all maps in the file that come after the block. So, for instance, if every map in a file should have a certain properties, you can place those properties in a single "adddefaultmap" block at the beginning of the file rather than in every map definition.
Good to know, thanks!
User avatar
ShockwaveS08
Posts: 185
Joined: Thu Jul 07, 2016 7:29 pm
Discord: Shockwave_S08#0859
Github ID: Shockwave508
Preferred Pronouns: He/Him
Operating System Version (Optional): Android 10
Location: Manhattan, IL

Re: WadSmoosh - merge all official id releases into one PK3

Post by ShockwaveS08 »

Will there be support for the "Ultra-Violence+" difficulty that was just introduced in the Unity versions of Doom and Doom II?

Basically, weapon and monster spawns match those present only in co-op and deathmatch, and enemies are just as fast as they are on Nightmare.

Par times were also added for E1M8, E2M8, and E3M8.
Gez
 
 
Posts: 17653
Joined: Fri Jul 06, 2007 3:22 pm

Re: WadSmoosh - merge all official id releases into one PK3

Post by Gez »

Creating a skill that's basically UV fast is possible, creating a skill that causes the engine to ignore the multiplayer-only flag would require a new engine feature I guess. But it would be an okay feature suggestion.

May I suggest taking the DSSECRET lump from extras.wad, if found? It's the official secret sound now.

Return to “Creation, Conversion, and Editing”