[SPRITES] Spriting Carnival!!
Re: [SPRITES] Spriting Carnival!!
doom eternal- ish mix with doom arachnotron
- Attachments
-
- arachnotron.png (5.3 KiB) Viewed 3070 times
-
- Posts: 533
- Joined: Fri Sep 11, 2015 5:26 am
Re: [SPRITES] Spriting Carnival!!
put some D64 legs on that onen64q wrote:doom eternal- ish mix with doom arachnotron
- Stopsignal
- Posts: 150
- Joined: Tue Apr 21, 2015 11:51 am
Re: [SPRITES] Spriting Carnival!!
Gonna post it here too! Coming along.
Re: [SPRITES] Spriting Carnival!!
Friggin' love this. I think this monster will become iconic.Stopsignal wrote:Gonna post it here too! Coming along.
- Cabo_Fiambre
- Posts: 54
- Joined: Thu Aug 30, 2018 5:00 pm
Re: [SPRITES] Spriting Carnival!!
---
Last edited by Cabo_Fiambre on Thu Jul 09, 2020 9:56 am, edited 2 times in total.
- ChopBlock223
- Posts: 80
- Joined: Tue Apr 02, 2019 3:19 pm
- Operating System Version (Optional): Windows 10 with extensive trimming and regedits.
- Graphics Processor: nVidia (Modern GZDoom)
Re: [SPRITES] Spriting Carnival!!
Here's one I've been working on for a while, a 1911 pistol.
I wanted to make the rear of the slide and frame look as accurate as possible to a typical 1911, with the same shape of the hammer, the firing-pin, the extractor plunger, the beavertail/grip safety.
https://i.imgur.com/NM4eJAy.gif
(I'd embed this directly if I could but whatever)
The way I picture this is as a typical stainless steel build, Novak style ramped rear sight, both front sight and rear sight with illuminating tritium inserts for aiming in low light conditions (should probably be pretty easy to make brightmaps for this thing), the grips wrap around the front, styled to look kind of like Pachmayr ones. In general I went for a Colt Delta Elite look, mixing the classic appearance and the new one, with wraparound grips like the old one, and with a rail on the frame like the new ones. I personally prefer spur hammers on automatic pistols, but I find the ring shaped 'Commander' style hammer looks just right on a Delta Elite.
You could easily use this as a Colt Delta Elite, 10mm Auto and all (of course, this wouldn't be 100% suitable for using a silencer with, but videogames are videogames), but just as well it could be your ordinary .45 Auto, .45 Super, .40 S&W, 9mm Luger, .38 Super, or .357 Sig, etc, whichever you find the most fitting, perhaps you'd even use it as a double stack. I was briefly playing with what kind of markings and grip medallions I'd put on, but decided I could just as well leave that blank and let people add that detail themselves if they want.
I figure perhaps this 1911 has some kind of special barrel bushing with which one could use a silencer which locks in place with a lever (unlike a threaded one, where you might have to tighten it down every now and then).
Use however you see fit, just leave my name in the credits.
Primarily, I based it on the old FreeDoom pistol (do they still use that thing?), which I then basically painted over and reworked, silencer painted by hand, the pickup sprite is painted over an old stencil (I left the high resolution one), then made a small scale one for people who don't like to use high res pickup sprites. The silencer and laser unit are painted by hand.I wanted to make the rear of the slide and frame look as accurate as possible to a typical 1911, with the same shape of the hammer, the firing-pin, the extractor plunger, the beavertail/grip safety.
https://i.imgur.com/NM4eJAy.gif
(I'd embed this directly if I could but whatever)
The way I picture this is as a typical stainless steel build, Novak style ramped rear sight, both front sight and rear sight with illuminating tritium inserts for aiming in low light conditions (should probably be pretty easy to make brightmaps for this thing), the grips wrap around the front, styled to look kind of like Pachmayr ones. In general I went for a Colt Delta Elite look, mixing the classic appearance and the new one, with wraparound grips like the old one, and with a rail on the frame like the new ones. I personally prefer spur hammers on automatic pistols, but I find the ring shaped 'Commander' style hammer looks just right on a Delta Elite.
You could easily use this as a Colt Delta Elite, 10mm Auto and all (of course, this wouldn't be 100% suitable for using a silencer with, but videogames are videogames), but just as well it could be your ordinary .45 Auto, .45 Super, .40 S&W, 9mm Luger, .38 Super, or .357 Sig, etc, whichever you find the most fitting, perhaps you'd even use it as a double stack. I was briefly playing with what kind of markings and grip medallions I'd put on, but decided I could just as well leave that blank and let people add that detail themselves if they want.
I figure perhaps this 1911 has some kind of special barrel bushing with which one could use a silencer which locks in place with a lever (unlike a threaded one, where you might have to tighten it down every now and then).
Use however you see fit, just leave my name in the credits.
- Dr_Cosmobyte
- Posts: 2759
- Joined: Thu Jun 04, 2015 9:07 pm
- Location: Killing spiders.
Re: [SPRITES] Spriting Carnival!!
I've missed your works.
- ChopBlock223
- Posts: 80
- Joined: Tue Apr 02, 2019 3:19 pm
- Operating System Version (Optional): Windows 10 with extensive trimming and regedits.
- Graphics Processor: nVidia (Modern GZDoom)
Re: [SPRITES] Spriting Carnival!!
I've been very busy. At some point I should probably make a thread for my project.
- LossForWords
- Posts: 675
- Joined: Fri Jan 13, 2017 9:08 pm
Re: [SPRITES] Spriting Carnival!!
remake of an old smg, inspired by the caterpillar (rip) from ye olde aracnocide versions.
credz to capj, gaa1992, mike12, banjo and id software.
credz to capj, gaa1992, mike12, banjo and id software.
-
- Posts: 108
- Joined: Wed May 31, 2017 5:39 am
Re: [SPRITES] Spriting Carnival!!
I got an idea for little imp sprite improvement.
Who will help me with this?
I have some groundwork.
Who will help me with this?
I have some groundwork.
Re: [SPRITES] Spriting Carnival!!
I love this gun, but its bugging me. Its so dang shiny it looks like it should have a reflection of the doom guys hands on itElectricPulse wrote:
Really well done, i liked it!
Ok, this is the final version of our Spetsnaz-AK (i promise this is the last edit, i know i flooded the entire page with it ), now being a variant of the AK-74M:
And featuring a drum magazine:
*I used Blood's tommy gun drum on the second sheet, just made some changes. Also used some heavy edits made by vólentiæn.
- Zackdoessomething
- Posts: 23
- Joined: Sat Nov 25, 2017 1:48 am
- Location: Spaghetti Land
Re: [SPRITES] Spriting Carnival!!
Holy fucking shit. that looks so amazing.ChopBlock223 wrote:Here's one I've been working on for a while, a 1911 pistol.Primarily, I based it on the old FreeDoom pistol (do they still use that thing?), which I then basically painted over and reworked, silencer painted by hand, the pickup sprite is painted over an old stencil (I left the high resolution one), then made a small scale one for people who don't like to use high res pickup sprites. The silencer and laser unit are painted by hand.
I wanted to make the rear of the slide and frame look as accurate as possible to a typical 1911, with the same shape of the hammer, the firing-pin, the extractor plunger, the beavertail/grip safety.
https://i.imgur.com/NM4eJAy.gif
(I'd embed this directly if I could but whatever)
The way I picture this is as a typical stainless steel build, Novak style ramped rear sight, both front sight and rear sight with illuminating tritium inserts for aiming in low light conditions (should probably be pretty easy to make brightmaps for this thing), the grips wrap around the front, styled to look kind of like Pachmayr ones. In general I went for a Colt Delta Elite look, mixing the classic appearance and the new one, with wraparound grips like the old one, and with a rail on the frame like the new ones. I personally prefer spur hammers on automatic pistols, but I find the ring shaped 'Commander' style hammer looks just right on a Delta Elite.
You could easily use this as a Colt Delta Elite, 10mm Auto and all (of course, this wouldn't be 100% suitable for using a silencer with, but videogames are videogames), but just as well it could be your ordinary .45 Auto, .45 Super, .40 S&W, 9mm Luger, .38 Super, or .357 Sig, etc, whichever you find the most fitting, perhaps you'd even use it as a double stack. I was briefly playing with what kind of markings and grip medallions I'd put on, but decided I could just as well leave that blank and let people add that detail themselves if they want.
I figure perhaps this 1911 has some kind of special barrel bushing with which one could use a silencer which locks in place with a lever (unlike a threaded one, where you might have to tighten it down every now and then).
Use however you see fit, just leave my name in the credits.
EDIT: the quote somehow broke the image in the reply lol but still, that's amazing as hell, can i use it?
- ChopBlock223
- Posts: 80
- Joined: Tue Apr 02, 2019 3:19 pm
- Operating System Version (Optional): Windows 10 with extensive trimming and regedits.
- Graphics Processor: nVidia (Modern GZDoom)
Re: [SPRITES] Spriting Carnival!!
Of course, the sprites I post here are free for anyone to use. Just leave my name (as well as iD Software, 3DRealms, and the FreeDoom team) in the credits.
- Stopsignal
- Posts: 150
- Joined: Tue Apr 21, 2015 11:51 am
Re: [SPRITES] Spriting Carnival!!
Pigman hudface in progress!
-
- Posts: 384
- Joined: Mon May 09, 2016 1:38 am
- Location: Anywhere but here
- Contact:
Re: [SPRITES] Spriting Carnival!!
Piggsy Doom mod when?