Admittedly, I'm not much of a weapons person, and I know very little about them. What I do know is that there is a weapon called "Thompson" on the site, is centered, and has mention of WWII in its description.Enjay wrote:However, there is something about that one that doesn't properly say Thompson to me. I think it's the top of the barrel. It looks a bit too fussy - like there is more going on there than there should be on the relatively smooth and simple Thompson.
Resource Request thread *Read 1st post*
Forum rules
The Projects forums are only for projects. If you are asking questions about a project, either find that project's thread, or start a thread in the General section instead.
Got a cool project idea but nothing else? Put it in the project ideas thread instead!
Projects for any Doom-based engine (especially 3DGE) are perfectly acceptable here too.
Please read the full rules for more details.
The Projects forums are only for projects. If you are asking questions about a project, either find that project's thread, or start a thread in the General section instead.
Got a cool project idea but nothing else? Put it in the project ideas thread instead!
Projects for any Doom-based engine (especially 3DGE) are perfectly acceptable here too.
Please read the full rules for more details.
-
- Posts: 4949
- Joined: Sun Nov 14, 2010 12:59 am
Re: Resource Request thread *Read 1st post*
You're welcome.
Re: Resource Request thread *Read 1st post*
No, no, you're absolutely right and I'm not complaining. I appreciate the link. I've tried a quick tweak and something like this might work for me:
In saying that, having looked into them a bit further, there are quite a few Thompson variations and that Realm667 one is very close to some of the models.
And while I'm on, I'm also looking for something that might work as a centred heavy pistol of some sort that could believably be the Enforcer from Unreal 1 (or something very similar). It wouldn't have to be exact; it would merely need to convey that heavy, boxy looking bolter kind of appearance.
Quite difficult to capture from the centred viewpoint I suspect. Any suggestions?
[edit]
Hmmm... a bit of Frankenspriting gave me this.
Could work.
[/edit]
In saying that, having looked into them a bit further, there are quite a few Thompson variations and that Realm667 one is very close to some of the models.
And while I'm on, I'm also looking for something that might work as a centred heavy pistol of some sort that could believably be the Enforcer from Unreal 1 (or something very similar). It wouldn't have to be exact; it would merely need to convey that heavy, boxy looking bolter kind of appearance.
Quite difficult to capture from the centred viewpoint I suspect. Any suggestions?
[edit]
Hmmm... a bit of Frankenspriting gave me this.
Could work.
[/edit]
Re: Resource Request thread *Read 1st post*
This mod has some unused sprites in its files that fit what you're looking for.The Philosopher wrote:Anyone can chance the clerical hands to the fighter hands in the necronomicon?
https://www.realm667.com/index.php/en/a ... cronomicon
https://www.moddb.com/mods/class-rework ... rework-v10
Re: Resource Request thread *Read 1st post*
Is there a Strife hands sheet that extends the poses and angles available for the Strife protagonist hand/arm sprites similar to the Doom one anywhere? I can't find one but if it exists I'd appreciate a link.
- Captain J
-
- Posts: 16890
- Joined: Tue Oct 02, 2012 2:20 am
- Location: An ancient Escape Shuttle(No longer active here anymore)
- Contact:
Re: Resource Request thread *Read 1st post*
Here's Heaven full of them. Googling helps all the time! Tho there are probably few hand sprites i missed... Somewhere.
It's very unfortunate. But i still have that M1 Carbine sprite!ljwon_1 wrote:Some sprites are lost or missing.
Re: Resource Request thread *Read 1st post*
Still on the centred weapons hunt.
Does anyone have a Duke Nukem 3D shotgun in centred view? I am aware of the one on Realm667 but it doesn't quite work for me. It's not bad but the vents on the top and also the rear where the hand is don't look quite right to me.
I'd only need the one centred "ready" frame. The recoil and cocking frames are fine.
(re my earlier request, I take it no one is aware of a Strife hands sheet.)
Does anyone have a Duke Nukem 3D shotgun in centred view? I am aware of the one on Realm667 but it doesn't quite work for me. It's not bad but the vents on the top and also the rear where the hand is don't look quite right to me.
I'd only need the one centred "ready" frame. The recoil and cocking frames are fine.
(re my earlier request, I take it no one is aware of a Strife hands sheet.)
- LossForWords
- Posts: 672
- Joined: Fri Jan 13, 2017 9:08 pm
Re: Resource Request thread *Read 1st post*
there's this one, by lieutenant xandroEnjay wrote:Still on the centred weapons hunt.
Does anyone have a Duke Nukem 3D shotgun in centred view? I am aware of the one on Realm667 but it doesn't quite work for me. It's not bad but the vents on the top and also the rear where the hand is don't look quite right to me.
I'd only need the one centred "ready" frame. The recoil and cocking frames are fine.
(re my earlier request, I take it no one is aware of a Strife hands sheet.)
also, are there any rips of the jaguar aliens vs predator double barrel shotgun?
- Attachments
-
- dnsg.png (3.65 KiB) Viewed 1276 times
- Captain J
-
- Posts: 16890
- Joined: Tue Oct 02, 2012 2:20 am
- Location: An ancient Escape Shuttle(No longer active here anymore)
- Contact:
Re: Resource Request thread *Read 1st post*
What do you mean by that? Granted, the Sprite Sheet i provided has a lot of unrelated hand sprites. But it has all the Strife hands you requested. I also even found some extra sprites while finding it.Enjay wrote:(re my earlier request, I take it no one is aware of a Strife hands sheet.)
Are there even more of hand sprites of the game that i really did not aware? Please let me know if i'm not mistaking.
Wait. Is there a Double Barrel Shotgun in the game? I think i can find the SPAS one, but i didn't know such weapon actually existed. Maybe it's unused?LossForWords wrote:also, are there any rips of the jaguar aliens vs predator double barrel shotgun?
- ljwon_1
- Posts: 36
- Joined: Fri Dec 07, 2018 7:24 am
- Preferred Pronouns: He/Him
- Location: Republic of Korea
Re: Resource Request thread *Read 1st post*
I saw the sprites made by Paul in DRDTeam Forum.
But those sprites are now disappearing.
I think there was more to it than there is now.
It's a little bit too much, but is there anyone who still has the sprites?
https://forum.drdteam.org/viewtopic.php?f=6&t=2316
Maybe this file was the most important one.
But those sprites are now disappearing.
I think there was more to it than there is now.
It's a little bit too much, but is there anyone who still has the sprites?
https://forum.drdteam.org/viewtopic.php?f=6&t=2316
Maybe this file was the most important one.
Re: Resource Request thread *Read 1st post*
I'm so sorry. I don't know why but I simply didn't see your reply.Captain J wrote:What do you mean by that? Granted, the Sprite Sheet i provided has a lot of unrelated hand sprites. But it has all the Strife hands you requested. I also even found some extra sprites while finding it.
Thank you for posting that. Unfortunately, the sheet doesn't have a lot of Strife hands. It would be nice if as many existed as there are for Doom but it seems unlikely that will ever happen. Thanks again.
Re: Resource Request thread *Read 1st post*
Thank you. I can't compare it very well with the other one ATM because I'm on my phone but I'll check it properly later on.LossForWords wrote:Enjay wrote:there's this one, by lieutenant xandro
[edit] I've had a chance to look at it now. It's obciously bases on the same source as the Real667 one because they have a lot of pixels in common. However, I do think xandro's one is a bit better so I'll try to base something off of it. Thanks again. [/edit]
- LossForWords
- Posts: 672
- Joined: Fri Jan 13, 2017 9:08 pm
Re: Resource Request thread *Read 1st post*
huh, i only found out those sprites were from a beta today.Captain J wrote:Wait. Is there a Double Barrel Shotgun in the game? I think i can find the SPAS one, but i didn't know such weapon actually existed. Maybe it's unused?
https://www.youtube.com/watch?v=47uPhE3c0zM
Re: Resource Request thread *Read 1st post*
I wonder, is there a HUD sprite for Deckard's blaster from Bladerunner? Preferably angled but centered would be ok too. It is also used as the model for the .223 pistol in Fallout (or "That Gun" in F3).
- LossForWords
- Posts: 672
- Joined: Fri Jan 13, 2017 9:08 pm
Re: Resource Request thread *Read 1st post*
is there any version of this usp by sgt shivers that's all black with green sights?
- Attachments
-
- 2m2et95.png (72.88 KiB) Viewed 1160 times
-
- Posts: 384
- Joined: Mon May 09, 2016 1:38 am
- Location: Anywhere but here
- Contact:
Re: Resource Request thread *Read 1st post*
Does anyone have any flashbang explosion effects (without tinnitus + throwing sounds, I already have those) specifically I also want to avoid using the CoD ones, as they lack a certain omph.
Also don't refer to videos, I live in Australia without a VPN so I can't go around ripping links, and downloading mp3s from convert2mp3 sites due to our government putting the footdown on them via the internet providers.
Also don't refer to videos, I live in Australia without a VPN so I can't go around ripping links, and downloading mp3s from convert2mp3 sites due to our government putting the footdown on them via the internet providers.