ZDoom multiplayer setup, troubleshooting and FAQ
Forum rules
Re: ZDoom multiplayer setup, troubleshooting and FAQ
UDP hole punching is a gateway traversal technique, not something you yourself need to setup. Once you've foward the necessary port on the host, you're set (so nothing changed from doing a 2 player game). I'm a little confused because nowhere has anybody implied otherwise.
Re: ZDoom multiplayer setup, troubleshooting and FAQ
"A person joining a game does not need to specify any additional parameters aside from loading any custom WADs or DeHackEd patches that the host is using."
ZDoom needs a lobby to address this, and I think that the Tox protocol is a reasonable solution as it seems to work even on LAN, the rest is a plugin to show rooms, latency, handle command line parameters and download mods using something like wad-archive.
ZDoom needs a lobby to address this, and I think that the Tox protocol is a reasonable solution as it seems to work even on LAN, the rest is a plugin to show rooms, latency, handle command line parameters and download mods using something like wad-archive.
- LastManonEarth
- Posts: 44
- Joined: Mon Apr 25, 2016 4:25 pm
Re: ZDoom multiplayer setup, troubleshooting and FAQ
Did not find another place to ask this: Which is the command I need to use to make the ¨players block each other normally¨. I want to use this feature and block my friend when playing multiplayer.
Re: ZDoom multiplayer setup, troubleshooting and FAQ
That's already the behaviour in Doom since 1993. ZDoom naturally keeps it by design.
- LastManonEarth
- Posts: 44
- Joined: Mon Apr 25, 2016 4:25 pm
Re: ZDoom multiplayer setup, troubleshooting and FAQ
Sorry as doomseeker allows to use this feature I thought that there was a CVAR I was missing to create this physic behavior. Thanks.
Re: ZDoom multiplayer setup, troubleshooting and FAQ
Does ZDoom have -extratics? Not -extratic, -extratics, as in -extratics 3 -dup 2. Those are the settings I use in crispy doom, and since I hear the netcode of zdoom isn't that different, I'm curious if -extratics exists, especially since it isn't mentioned in the wiki.
- InsanityBringer
- Posts: 3386
- Joined: Thu Jul 05, 2007 4:53 pm
- Location: opening the forbidden box
Re: ZDoom multiplayer setup, troubleshooting and FAQ
I don't believe you can configure extratics, the only option you have is extratic, sadly
Re: ZDoom multiplayer setup, troubleshooting and FAQ
So how is zdoom's netcode compared to crispy doom anyway?
- InsanityBringer
- Posts: 3386
- Joined: Thu Jul 05, 2007 4:53 pm
- Location: opening the forbidden box
Re: ZDoom multiplayer setup, troubleshooting and FAQ
Well, at the end of the day its a P2P networking system where all clients tell every other client what inputs they performed and then every client runs the game using the collected input (though there's a little more to it to keep it smooth). I believe crispy doom does something similar (since its what vanilla did), though a lot of implementation details likely vary.
Re: ZDoom multiplayer setup, troubleshooting and FAQ
So what's ZDoom's closest equivalent to crispy doom's -extratics 3 -dup 2?
Before you ask, I don't want to touch Zandronum until it has OpenAL Support and gains 2.8.x's ARM fixes.
Before you ask, I don't want to touch Zandronum until it has OpenAL Support and gains 2.8.x's ARM fixes.
Last edited by Danfun64 on Tue Oct 18, 2016 1:54 pm, edited 1 time in total.
- Goldenflare5643
- Posts: 122
- Joined: Sat Oct 08, 2016 9:20 pm
- Location: One of those stupid 2fort daycare servers
Re: ZDoom multiplayer setup, troubleshooting and FAQ
Wait, where do I type the codes to set up\join the game in? Do I do it in the game console (pressing '~' key while in a level) or do I do it some where else?
Re: ZDoom multiplayer setup, troubleshooting and FAQ
You have to do it from the command line.
Player 1 types: zdoom -file <wad> -host <number players> i.e. "zdoom -file worlddomination.pk3 -host 3"
Players 2 & 3 need Player 1's IP address, then they type zdoom -file <wad> -join <player 1's ip> i.e. "zdoom -file worlddomination.pk3 -join 123.45.67.89"
More info: [wiki]Multiplayer[/wiki]
Player 1 types: zdoom -file <wad> -host <number players> i.e. "zdoom -file worlddomination.pk3 -host 3"
Players 2 & 3 need Player 1's IP address, then they type zdoom -file <wad> -join <player 1's ip> i.e. "zdoom -file worlddomination.pk3 -join 123.45.67.89"
More info: [wiki]Multiplayer[/wiki]
- Goldenflare5643
- Posts: 122
- Joined: Sat Oct 08, 2016 9:20 pm
- Location: One of those stupid 2fort daycare servers
Re: ZDoom multiplayer setup, troubleshooting and FAQ
What do you mean by command line? The only place I know that you can use to enter commands is the drop down interface you get when you press the '~' key, sorry for being some what of dufus when it comes to things like this...
- wildweasel
- Posts: 21706
- Joined: Tue Jul 15, 2003 7:33 pm
- Preferred Pronouns: He/Him
- Operating System Version (Optional): A lot of them
- Graphics Processor: Not Listed
- Contact:
Re: ZDoom multiplayer setup, troubleshooting and FAQ
The "command line" is usually for options and switches being given to a program before it even starts, usually by creating a shortcut and editing it, using the Run dialogue, or with a launcher. See this wiki article for more.Goldenflare5643 wrote:What do you mean by command line? The only place I know that you can use to enter commands is the drop down interface you get when you press the '~' key, sorry for being some what of dufus when it comes to things like this...
- Goldenflare5643
- Posts: 122
- Joined: Sat Oct 08, 2016 9:20 pm
- Location: One of those stupid 2fort daycare servers
Re: ZDoom multiplayer setup, troubleshooting and FAQ
Oh nice!
Thank you, also, if I want to make a batch file that automatically opens a multiplayer game, do I just type in the commands from the first post on this topic into the bat file?
Thank you, also, if I want to make a batch file that automatically opens a multiplayer game, do I just type in the commands from the first post on this topic into the bat file?