Page 1 of 2

Doom Unity Ripper (For Doom 2019 Re-Releases)

PostPosted: Fri Jan 10, 2020 2:45 pm
by kevansevans
https://github.com/kevansevans/Unity-Do ... tag/V1.2.0

This is a simple executable that takes the IWADS out of the Unity assets for the Re-Releases of Classic Doom that Bethesda released on their launcher. This program is windows only, since afaik the Bethesda Launcher is only available for windows.

The only testing I have done was to see if the files would open up in Slade. I'm not 100 percent confident on these files, so it would be appreciated if a more well trained eye took a look at these.

Re: Doom Unity Ripper (For Doom 2019 Re-Releases)

PostPosted: Fri Jan 10, 2020 2:58 pm
by Redneckerz
In the here and now, a little tool that has usefulness written all over it. Thanks for this.

Re: Doom Unity Ripper (For Doom 2019 Re-Releases)

PostPosted: Fri Jan 10, 2020 5:07 pm
by kevansevans
Quick update, the tool now scans the addons folder and neatly copies any wads found into the output folder: https://github.com/kevansevans/Unity-Do ... tag/V1.1.0

https://github.com/kevansevans/Unity-Do ... tag/V1.2.0

Re: Doom Unity Ripper (For Doom 2019 Re-Releases)

PostPosted: Fri Jan 17, 2020 1:14 am
by Hidden Hands
Hi, I just played a lot of these and they worked fine. Nice one! I'm not sure if you need to have purchased the re-release from Bethesda.net for it to work, or if this just gives them to you because I don't know how this program works, but it ripped the wads fine for me. I'm sure you have to have purchased the Bethesda.net downloads for it to work, which I did, so I think that's right? Either way, these play great.

Re: Doom Unity Ripper (For Doom 2019 Re-Releases)

PostPosted: Fri Jan 17, 2020 3:37 pm
by Enjay
I don't actually have the unity versions but when I run this on a friend's computer, we get NERVE.WAD, PLUTONIAUNITY.WAD, SIGIL.WAD and TNTUNITY.WAD in the output folder but we don't get anything else.

Here's what UDR says...
Code: Select allExpand view
Checking default Bethesda games install...
Checking for Doom and Doom II...
Ultimate Doom is not present.
Doom II is not present.
Doom games not found, please point me to the install folder! Type 'skip' to ignore this step
:>


I've tried typing in full paths and partial paths and anything else that I can think of but no dice.

Any idea what I might be doing wrong here?

The games themselves definitely work - I've played a couple of maps on his machine and seen the green-cross medpacks but it'd be nice to see the original maps in GZDoom too. (Not that it really matters, my impression is that the maps are unaltered).

Re: Doom Unity Ripper (For Doom 2019 Re-Releases)

PostPosted: Sat Jan 18, 2020 2:43 pm
by kevansevans
Hidden Hands wrote:I'm sure you have to have purchased the Bethesda.net downloads for it to work


This is exactly what it's for! Glad it worked for you.

Enjay wrote:I've tried typing in full paths and partial paths and anything else that I can think of but no dice.


You need to point UDR to the full path just above the installs. So if the path to the game is "C:\Program Files (x86)\Bethesda.net Launcher\games\DOOM_II_Classic_2019", you need to give it "C:\Program Files (x86)\Bethesda.net Launcher\games". You can find the install path through the bethesda launcher under Game Options -> Show in Folder. Also UDR will only work with the Unity versions of Doom and not the DosBox versions, as the DosBox versions have the wads already exposed and can just be copy and pasted.

If this continues to give you issues, hit me up in DM's and I'll work with you in solving the problem.

Re: Doom Unity Ripper (For Doom 2019 Re-Releases)

PostPosted: Sat Jan 18, 2020 2:57 pm
by Enjay
I could have sworn that we'd tried that; obviously we hadn't. All files have now been assembled/extracted. Thank you.

The DOSBox versions do indeed have the WADs already exposed, but they are not the same versions as the Unity ones. They are the older ones with the med-pack pills, plain Wolfenstein walls and SSWV sprites replaced with ones that look like the zombieman.

Re: Doom Unity Ripper (For Doom 2019 Re-Releases)

PostPosted: Sun Jan 19, 2020 3:03 pm
by Hidden Hands
How I did it was ran the program, then a list of all the wads came up (doom and doom ii come up as DOOMUNITY.WAD and DOOM2UNITY.WAD) then I highlighted them all and copy pasted them where I wanted.

Re: Doom Unity Ripper (For Doom 2019 Re-Releases)

PostPosted: Sun Jan 19, 2020 4:37 pm
by Enjay
Yeah, we have extracted them all now. It's just that the first time we tried, all of the WADs were extracted except for the two main core games. Following kevansevans' instructions meant we could get the core games too.

Re: Doom Unity Ripper (For Doom 2019 Re-Releases)

PostPosted: Sat Jun 27, 2020 1:03 am
by kevansevans
1.3 Update: https://github.com/kevansevans/Unity-Do ... s/tag/V1.3

Added OneDrive support for users who have set their OneDrive to function as their games folder
Various tweaks and stability
Fixed a bug where program would assume user inserted wad was directory and would crash.

Re: Doom Unity Ripper (For Doom 2019 Re-Releases)

PostPosted: Mon Jul 20, 2020 3:45 pm
by frozenfoxx
Absolutely fantastic, thank you so much!

Re: Doom Unity Ripper (For Doom 2019 Re-Releases)

PostPosted: Thu Sep 03, 2020 12:10 pm
by kevansevans
UDR was tested with the latest updates. The latest versions of the Bethesda Launcher versions now have their wads external, and no longer need to be extracted. However, the Master Levels are still embedded in Doom 2 and still require extraction. The program should still work if you instruct the Bethesda Launcher to use an older update of the game.

Re: Doom Unity Ripper (For Doom 2019 Re-Releases)

PostPosted: Wed Sep 09, 2020 9:24 am
by scalliano
Question: isi it possible to get at those lovely 16:9 TITLEPICs?

Re: Doom Unity Ripper (For Doom 2019 Re-Releases)

PostPosted: Thu Sep 17, 2020 10:24 am
by NightFright
I just posted a patch over at the Duke4.net forums which does pretty much that. You don't even need a dev build, works with latest official GZDoom release.

Otherwise: Does anybody know where and how Unity Doom stores its addon wads? I tried to get plutonia.wad and tnt.wad after downloading them, but I couldn't find them anywhere.

Re: Doom Unity Ripper (For Doom 2019 Re-Releases)

PostPosted: Fri Sep 18, 2020 1:46 am
by Kinsie
NightFright wrote:Otherwise: Does anybody know where and how Unity Doom stores its addon wads? I tried to get plutonia.wad and tnt.wad after downloading them, but I couldn't find them anywhere.
They're in C:\Users\(Your Username)\Saved Games\id Software\(DOOM or DOOM 2)\WADs. The extensionless number file inside of each folder inside is your WAD.