GZDoomBuilder-Bugfix, a maintenance fork of GZDB
Re: GZDoomBuilder-Bugfix, a maintenance fork of GZDB
I did, but didn't try to run it because it seemed straightforward. That's odd. Can you give me an example wad of a model that can be pitched? (I tried to make one, but then the pitch changes are visible in GZDB, but not in GZDoom...)
- Ozymandias81
- Posts: 2063
- Joined: Thu Jul 04, 2013 8:01 am
- Graphics Processor: nVidia with Vulkan support
- Location: Mount Olympus, Mars
- Contact:
Re: GZDoomBuilder-Bugfix, a maintenance fork of GZDB
This one that I have posted before works the same way like those Flakguns from BoA... Did you take in consideration INHERITACTORPITCH deprecated flag too? I can't test it atm but that should do the trick...
Just to clarify things: I used USEACTORPITCH on Blade of Agony and I don't want to use a deprecated flag
Just to clarify things: I used USEACTORPITCH on Blade of Agony and I don't want to use a deprecated flag
Re: GZDoomBuilder-Bugfix, a maintenance fork of GZDB
Ok, I think I understand now. The pitch works partially, apparently it's referenced in multiple places.
Should be fixed now, sorry about that.
Should be fixed now, sorry about that.
- Ozymandias81
- Posts: 2063
- Joined: Thu Jul 04, 2013 8:01 am
- Graphics Processor: nVidia with Vulkan support
- Location: Mount Olympus, Mars
- Contact:
Re: GZDoomBuilder-Bugfix, a maintenance fork of GZDB
Thank you kindly ZZYZX, I'll be able to verify it tomorrow.ZZYZX wrote:Ok, I think I understand now. The pitch works partially, apparently it's referenced in multiple places.
Should be fixed now, sorry about that.
[EDIT]: Ok this is great, finally you managed to fix it! Thanks a lot ZZYZX, really appreciate it!
Let's hope this would be the last time you'll have to fix this.
-
- Posts: 62
- Joined: Sun May 15, 2016 2:19 pm
Re: GZDoomBuilder-Bugfix, a maintenance fork of GZDB
I found this sector merge bug. It only seems to occur with this specific setup.
Spoiler:
Re: GZDoomBuilder-Bugfix, a maintenance fork of GZDB
Merging doesn't work very well with lines that face the same sector twice, that's a known bug and not sure if I can fix that quickly. Noted, though.
- Armaetus
- Posts: 1255
- Joined: Fri Mar 13, 2009 3:55 pm
- Preferred Pronouns: He/Him
- Operating System Version (Optional): Windows 10 Home
- Graphics Processor: ATI/AMD with Vulkan/Metal Support
- Location: New York State
- Contact:
Re: GZDoomBuilder-Bugfix, a maintenance fork of GZDB
What is it with the Visplane Explorer plugin freezing GZDBBF half the time?
- Kappes Buur
-
- Posts: 4122
- Joined: Thu Jul 17, 2003 12:19 am
- Graphics Processor: nVidia (Legacy GZDoom)
- Location: British Columbia, Canada
- Contact:
Re: GZDoomBuilder-Bugfix, a maintenance fork of GZDB
Concerning resizing the editor window
viewtopic.php?f=44&t=54957&start=375#p987234
I took another look at the file GZBuilder.cfg and realized that the mainwindow block seems to be a holdover from Doombuilder2 and superfluous in the context of GZDB or GZDB-BF. I can set the screensize in windows - mainform, which is a bit cumbersome. It would be nice if I could select the editor window size by dragging the window boundaries with a numeric display of x and y sizes or by clicking on predetermined sizes at startup from a menu similar to this
viewtopic.php?f=44&t=54957&start=375#p987234
If you are still wanting to implement that, that would be a welcomed feature, but ....ZZYZX wrote:Will be added, ...
I took another look at the file GZBuilder.cfg and realized that the mainwindow block seems to be a holdover from Doombuilder2 and superfluous in the context of GZDB or GZDB-BF. I can set the screensize in windows - mainform, which is a bit cumbersome. It would be nice if I could select the editor window size by dragging the window boundaries with a numeric display of x and y sizes or by clicking on predetermined sizes at startup from a menu similar to this
- Armaetus
- Posts: 1255
- Joined: Fri Mar 13, 2009 3:55 pm
- Preferred Pronouns: He/Him
- Operating System Version (Optional): Windows 10 Home
- Graphics Processor: ATI/AMD with Vulkan/Metal Support
- Location: New York State
- Contact:
Re: GZDoomBuilder-Bugfix, a maintenance fork of GZDB
Builder: Object reference not set to an instance of an object.
Object reference not set to an instance of an object.
at CodeImp.DoomBuilder.Config.ConfigurationInfo.Finalize() in w:\dev\GZDoom-Builder\Source\Core\Config\ConfigurationInfo.cs:line 233
What happened here? I switched to Boom (Doom format) from vanilla/limit removing. That and I added configuration to Doom for Boom's.
This is with R2978.
Object reference not set to an instance of an object.
at CodeImp.DoomBuilder.Config.ConfigurationInfo.Finalize() in w:\dev\GZDoom-Builder\Source\Core\Config\ConfigurationInfo.cs:line 233
What happened here? I switched to Boom (Doom format) from vanilla/limit removing. That and I added configuration to Doom for Boom's.
This is with R2978.
Re: GZDoomBuilder-Bugfix, a maintenance fork of GZDB
Does this reliably reproduce? Because I can't make it happen for me.
- Armaetus
- Posts: 1255
- Joined: Fri Mar 13, 2009 3:55 pm
- Preferred Pronouns: He/Him
- Operating System Version (Optional): Windows 10 Home
- Graphics Processor: ATI/AMD with Vulkan/Metal Support
- Location: New York State
- Contact:
Re: GZDoomBuilder-Bugfix, a maintenance fork of GZDB
I've not tried to reproduce it since so it might just be a minor fluke on my end.
Re: GZDoomBuilder-Bugfix, a maintenance fork of GZDB
Flatsprites with offsets seems to be shown 90º wrong when you change their angle in DB.
Re: GZDoom 3.1.0 Released
Uhh, why can't I see dynamic lights anymore? They seem to have vanished from the editor (GZDoom Builder).
https://postimg.org/image/a71jmc4h9/
lights.pk3 are loaded in resources
Although they are blank/missing in the editor, they work when testing, which is even weirder.
*edit: Okay, got redirected to this thread. Now, how would someone who is entirely computer illiterate install the fix?
I tried just running the updater then opening Builder.exe but I get a ton of errors, and every sprite seems to be missing now.
https://postimg.org/image/a71jmc4h9/
lights.pk3 are loaded in resources
Although they are blank/missing in the editor, they work when testing, which is even weirder.
*edit: Okay, got redirected to this thread. Now, how would someone who is entirely computer illiterate install the fix?
I tried just running the updater then opening Builder.exe but I get a ton of errors, and every sprite seems to be missing now.
- Kappes Buur
-
- Posts: 4122
- Joined: Thu Jul 17, 2003 12:19 am
- Graphics Processor: nVidia (Legacy GZDoom)
- Location: British Columbia, Canada
- Contact:
Re: GZDoom 3.1.0 Released
The most likely cause ... check what is selectedZan wrote:Uhh, why can't I see dynamic lights anymore? They seem to have vanished from the editor (GZDoom Builder).
https://postimg.org/image/a71jmc4h9/
lights.pk3 are loaded in resources
Although they are blank/missing in the editor, they work when testing, which is even weirder.
*edit: Okay, got redirected to this thread. Now, how would someone who is entirely computer illiterate install the fix?
Upload your map.Zan wrote: I tried just running the updater then opening Builder.exe but I get a ton of errors, and every sprite seems to be missing now.
Re: GZDoom 3.1.0 Released
Nope, dynamic lights are toggled. But the whole Thing folder where you get the dynamic lights is missing.Kappes Buur wrote: [...]
Upload your map.
Here is the map - https://we.tl/gHUnQYaiPS
Also, here's the pk3 (or you'll see everything as missing anyway) - https://we.tl/QkxjD0toRl