[SPRITES] Spriting Carnival!!

Discuss anything ZDoom-related that doesn't fall into one of the other categories.

Re: [SPRITES] Spriting Carnival!!

Postby Cherno » Fri Aug 24, 2018 12:06 pm

I think it would be easier to take a 3d models of a G36C or whatever, and model the additional pieces onto it, and then render it. That's how I would do it, anyway.
User avatar
Cherno
 
Joined: 06 Dec 2016

Re: [SPRITES] Spriting Carnival!!

Postby jdredalert » Fri Aug 24, 2018 12:15 pm

Cherno wrote:I think it would be easier to take a 3d models of a G36C or whatever, and model the additional pieces onto it, and then render it. That's how I would do it, anyway.


That's surely a way to go, but it's not that hard to do some photoshop magic using those resources as base. Here's a small, rough-on-the edges concept done in 30 minutes. There's a lot more to improve, but hey, that's what concepts are. :wink:

Image
Doom Movie Rifle first try

EDIT - In order to avoid double posting, i'm updating this post here. I did what i could about the Doom movie rifle. I think the results are better than what it used to be, but there are some inconsistency between the idle and the reload frame. Maybe someone else can take it from here, as fun as it was to play around with those sprites earlier today, i'm done with them. I'm now working on a Glock 18. Basic frames are done, i'll start with the optional ADS frames right now. I hope you enjoy.

Image
Reaper's Rifle. Credits to ElectricPulse, VriskaSerket and Ninlhil (for the parts i used from his UAC Carbine)

Image
Glock 18 from CoD MW3, basic frames. Credits goes to Infinity Ward.
Last edited by jdredalert on Fri Aug 24, 2018 5:55 pm, edited 1 time in total.
User avatar
jdredalert
State of badass art.
 
Joined: 14 Jul 2013

Re: [SPRITES] Spriting Carnival!!

Postby Kinsie » Fri Aug 24, 2018 5:50 pm

Mr.Enchanter wrote:Ruiner mugshot
Image
Did you seriously watermark this after your ripping-from-Ion-Maiden-screenshots debacle?
User avatar
Kinsie
Dog Days
 
Joined: 22 Oct 2004
Location: MAP33
Discord: Find Me...
Twitch ID: thekinsie

Re: [SPRITES] Spriting Carnival!!

Postby ElectricPulse » Fri Aug 24, 2018 5:54 pm

jdredalert wrote:
Cherno wrote:I think it would be easier to take a 3d models of a G36C or whatever, and model the additional pieces onto it, and then render it. That's how I would do it, anyway.


That's surely a way to go, but it's not that hard to do some photoshop magic using those resources as base. Here's a small, rough-on-the edges concept done in 30 minutes. There's a lot more to improve, but hey, that's what concepts are. :wink:

Image
Doom Movie Rifle first try

EDIT - In order to avoid double posting, i'm updating this post here. I did what i could about the Doom movie rifle. I think the results are better than what it used to be, but there are some inconsistency between the idle and the reload frame. Maybe someone else can take it from here, as fun as it was to play around with those sprites earlier today, i'm done with them. I'm now working on a Glock 18. Basic frames are done, i'll start with the optional ADS frames right now. I hope you enjoy.

Image
Reaper's Rifle. Credit to ElectricPulse, VriskaSerket and Ninlhil (for the parts i used from his UAC Carbine

Image
Glock 18 from CoD MW3, basic frames. Credits goes to Infinity Ward.


Oh man, that is f*cking amazing!
User avatar
ElectricPulse
Don't worry, i'm just a simple man.
 
Joined: 31 May 2016
Location: São Paulo, Brazil
Operating System: Windows 10/8.1/8/201x 64-bit
OS Test Version: No (Using Stable Public Version)
Graphics Processor: Intel (Modern GZDoom)

Re: [SPRITES] Spriting Carnival!!

Postby PersonalComp234 » Fri Aug 24, 2018 7:14 pm

dasjfncsi.png

Used a lighter gradient and made some extra frames, looking pretty good.
The last frame is pretty much a placeholder, i'll work that out.
You do not have the required permissions to view the files attached to this post.
User avatar
PersonalComp234
 
Joined: 13 Jul 2018
Location: Being shipped to your front door.
Discord: pc234#2015
Twitch ID: pc2345

Re: [SPRITES] Spriting Carnival!!

Postby Mr.Enchanter » Fri Aug 24, 2018 10:15 pm

Kinsie wrote:
Mr.Enchanter wrote:Ruiner mugshot
Image
Did you seriously watermark this after your ripping-from-Ion-Maiden-screenshots debacle?

Uhh yes? I made that mistake long ago and I understand why it was a problem, It's not difficult to fill in the dots for someone that knows what they are doing, this is to prevent sprite shitposters from using while Im still working on it and with the rise of lazy screenrips and whatnot I felt it appropriate at least until done. Someone that can fill in the spots and actually do something with It Is welcome to do so but I'd rather not have It thrown into a brutal doom mugshot mutator before it's done.

Purely brutal doom fan drm

Im also trying to set a trend with sharing if people dont want it used but want to show it off.

Also the non watermark version is on Discord so this is just to filter out general public as well.

This is potentially for a community project as well so it'll be communal once that's decided.
Last edited by Mr.Enchanter on Fri Aug 24, 2018 10:45 pm, edited 1 time in total.
User avatar
Mr.Enchanter
Certified Shitposter
 
Joined: 21 Mar 2015
Location: USA
Discord: Enchanter#5420

Re: [SPRITES] Spriting Carnival!!

Postby Captain J » Fri Aug 24, 2018 10:21 pm

jdredalert wrote:Doom rifle stuff
Now that looks nice, detailed and stuff. But that angled one still looks blurred tho, i would like to see some of more improvements!
User avatar
Captain J
That's Amoreee
 
 
 
Joined: 02 Oct 2012
Location: A Year old Pizza Box
Discord: DiscussJ#3128

Re: [SPRITES] Spriting Carnival!!

Postby jdredalert » Sat Aug 25, 2018 6:00 am

Captain J wrote:
jdredalert wrote:Doom rifle stuff
Now that looks nice, detailed and stuff. But that angled one still looks blurred tho, i would like to see some of more improvements!


Thanks Cap. The angled one i thought it was a lost cause, because the source material was in really bad shape. Maybe someone can improve it a lil bit more in the future? I would like to see that.
User avatar
jdredalert
State of badass art.
 
Joined: 14 Jul 2013

Re: [SPRITES] Spriting Carnival!!

Postby Dr_Cosmobyte » Sat Aug 25, 2018 8:09 am

Ripping through one of my favorite childhood games, Ace Combat 2, i found these ranking medals and maybe this could look useful:

Image
User avatar
Dr_Cosmobyte
Also known as: GAA1992
 
Joined: 05 Jun 2015
Location: Killing spiders.

Re: [SPRITES] Spriting Carnival!!

Postby ElectricPulse » Sat Aug 25, 2018 11:20 am

New idle and firing frames:

Image

And what about the chainsaw?

Image

BIG UPDATE --> Finished the Chainsaw and ripped the SMG from the Cover Art:

Image

Image
User avatar
ElectricPulse
Don't worry, i'm just a simple man.
 
Joined: 31 May 2016
Location: São Paulo, Brazil
Operating System: Windows 10/8.1/8/201x 64-bit
OS Test Version: No (Using Stable Public Version)
Graphics Processor: Intel (Modern GZDoom)

Re: [SPRITES] Spriting Carnival!!

Postby jdredalert » Sat Aug 25, 2018 4:13 pm

I wonder how are we going to animate that chainsaw :lol:

And the third frame of the P90, is that supposed to be the reload frame? Keep in mind that the whole magazine must be detached in order to reload it.
User avatar
jdredalert
State of badass art.
 
Joined: 14 Jul 2013

Re: [SPRITES] Spriting Carnival!!

Postby ElectricPulse » Sat Aug 25, 2018 4:18 pm

Nah, it's just supposed to be an empty magazine :S
Last edited by ElectricPulse on Sat Aug 25, 2018 5:04 pm, edited 1 time in total.
User avatar
ElectricPulse
Don't worry, i'm just a simple man.
 
Joined: 31 May 2016
Location: São Paulo, Brazil
Operating System: Windows 10/8.1/8/201x 64-bit
OS Test Version: No (Using Stable Public Version)
Graphics Processor: Intel (Modern GZDoom)

Re: [SPRITES] Spriting Carnival!!

Postby jdredalert » Sat Aug 25, 2018 4:29 pm

Oh, i see. Well, in this case, try to keep the red tone on it, while trying to make it look empty on the inside. The P90 magazine is a basically a transparent case made of plastic/polymer/whatever the hell the material is.
User avatar
jdredalert
State of badass art.
 
Joined: 14 Jul 2013

Re: [SPRITES] Spriting Carnival!!

Postby Assassin of Purity » Sat Aug 25, 2018 4:43 pm

How people do this is just phenomenal.
Assassin of Purity
 
Joined: 10 May 2018

Re: [SPRITES] Spriting Carnival!!

Postby ElectricPulse » Sat Aug 25, 2018 5:12 pm

jdredalert wrote:Oh, i see. Well, in this case, try to keep the red tone on it, while trying to make it look empty on the inside. The P90 magazine is a basically a transparent case made of plastic/polymer/whatever the hell the material is.


Thanks for the tip, bro :)
User avatar
ElectricPulse
Don't worry, i'm just a simple man.
 
Joined: 31 May 2016
Location: São Paulo, Brazil
Operating System: Windows 10/8.1/8/201x 64-bit
OS Test Version: No (Using Stable Public Version)
Graphics Processor: Intel (Modern GZDoom)

PreviousNext

Return to General

Who is online

Users browsing this forum: Gez and 3 guests