[SPRITES] Spriting Carnival!!
- Hambourgeois
- Posts: 8
- Joined: Mon Jul 06, 2020 12:07 pm
Re: [SPRITES] Spriting Carnival!!
i'm sure this has been done a million times but i cobbled together pieces from the shotgun and pistol, plus a few hand placed pixels to make a hopefully better muzzle flash for the v0.5 assault rifle than the one in the wad. your preference of just the bright parts or the whole combined image. hope this saves someone else 5 or 10 minutes.
- Stopsignal
- Posts: 150
- Joined: Tue Apr 21, 2015 11:51 am
Re: [SPRITES] Spriting Carnival!!
first of all, thanks!! It does feel weird, still. The animation is *technically* correct, but it feels wrong, like the leg is sliding. Checking an older animation, looks like i had done this one a bit better (but with errors in other regards) so i'll check both and decide if it's worth fixingVostyok wrote: Personally I think the side animation is good as it is. Most of the leg is obscured, and trying to suggest more movement from that leg may instead distort the intended emphasis. You can see the left leg fully extending and bending, a little bit of asynchroncity is good for a living creature.
Thank you! sorry you had a bad day. Keep yer chin up, i'll take the opportunity to say your art is pretty cool!Nmn wrote:I understand you pixelled this from scratch.Stopsignal wrote:Monster sprite
This is very high quality, fabulous creature design as well. You've made my day, and it's been horrible thus far
May I inquire that software do you use to check the animation? Just cycling through opened separate frames as different images in the 2d software, or actuall using some soft to see how it walks.
Me? I still use good ol' Animation Shop that came bundled with PSP 7.0 by JASC.
I use photoshop's "Animation Timeline" function. It has a few idiosyncrasies that you need to get around, as in turning off "new layers visible in all frames" and avoiding changing stuff in the first frame (it moves it in all frames, unless you turn it off *per layer*, which is a hassle). After that, it's really perfect for animating pixelart with small frame counts. I'd like to say i'd try another program but i am so ridiculously used to Photoshop it would be impossible to leave it.
It's not the tool though, it's about how you use it!
If anyone needs a few more tips about how to animate in photoshop just contact me! I should probably continue my spriting tutorial some day.
-
- Posts: 2058
- Joined: Mon Feb 07, 2011 5:02 am
Re: [SPRITES] Spriting Carnival!!
some barrels:
and wooden ones (heretic and hexen inspired):
and a doom64 resize:
- Dr_Cosmobyte
- Posts: 2759
- Joined: Thu Jun 04, 2015 9:07 pm
- Location: Killing spiders.
Re: [SPRITES] Spriting Carnival!!
Hey, i like that last guy! Pretty nice (and can be used as a basis for a D64 flaming barrel)
- Hambourgeois
- Posts: 8
- Joined: Mon Jul 06, 2020 12:07 pm
Re: [SPRITES] Spriting Carnival!!
ed: forgot a pickup sprite
More raiding of pre-release content plus simple edits. Here's a sliced down BFG with the press release beta muzzleflash and some lighting in the grill.
More raiding of pre-release content plus simple edits. Here's a sliced down BFG with the press release beta muzzleflash and some lighting in the grill.
Last edited by Hambourgeois on Tue Jul 07, 2020 9:06 am, edited 1 time in total.
Re: [SPRITES] Spriting Carnival!!
Thank you, it means a lot to meStopsignal wrote:Keep yer chin up, i'll take the opportunity to say your art is pretty cool!
yes, if it's not a problem for you, please. Are you willing to redirect me to some tutorial I can actually understand regarding the subject? because I've tried 2 tutorials I still have little idea on using the animation bar in PS. Or would you rather share the knowledge yourself?Stopsignal wrote:If anyone needs a few more tips about how to animate in photoshop just contact me!
Is it that every animation is a different layer? Geez, because I keep transparency over my sprites as sepearate layers with hard edges, so one frame would actually be two layers.
I'm sorry.. I'm clueless what you meant by contact - you mean PM you or respond here? I can be dim sometimes
I'm using Photoshop CS 5 by the way. And I've grown much to it's use, regardless of my initial prejudice.
-
- Posts: 2058
- Joined: Mon Feb 07, 2011 5:02 am
Re: [SPRITES] Spriting Carnival!!
Good idea... Please do soDr_Cosmobyte wrote:Hey, i like that last guy! Pretty nice (and can be used as a basis for a D64 flaming barrel)
- Stopsignal
- Posts: 150
- Joined: Tue Apr 21, 2015 11:51 am
Re: [SPRITES] Spriting Carnival!!
Just tell me here, hahahahahNmn wrote: yes, if it's not a problem for you, please. Are you willing to redirect me to some tutorial I can actually understand regarding the subject? because I've tried 2 tutorials I still have little idea on using the animation bar in PS. Or would you rather share the knowledge yourself?
Is it that every animation is a different layer? Geez, because I keep transparency over my sprites as sepearate layers with hard edges, so one frame would actually be two layers.
It's done! viewtopic.php?f=39&t=67115&p=1158747#p1158747
Hope it helps! I'll also be posting my quick guide to walking frames there shortly, it will be the same one i wrote here, so it doens't get lost hahahahah
- Dr_Cosmobyte
- Posts: 2759
- Joined: Thu Jun 04, 2015 9:07 pm
- Location: Killing spiders.
Re: [SPRITES] Spriting Carnival!!
Sure thing man, will do.osjclatchford wrote:Good idea... Please do soDr_Cosmobyte wrote:Hey, i like that last guy! Pretty nice (and can be used as a basis for a D64 flaming barrel)
Re: [SPRITES] Spriting Carnival!!
Amazing! I'm bound to learn something new with thisStopsignal wrote:It's done! viewtopic.php?f=39&t=67115&p=1158747#p1158747
Interesting side note, just when I was looking for a sprite tutorial to supplement my knowledge on the subject last week this drops down from the sky as a gift
Re: [SPRITES] Spriting Carnival!!
Animating in Photoshop is pain. Main reason - when you change frame you than have to manually change the layer too. I've done most of Dex animations in it and it took 3 years. And for DooM there is another problem - you need to work in 5 or 8 rotations and the frames need to work together in every frame and every rotation. I would need to have a way to choose animation frame AND rotation frame and freely move between them. I guess you can make a Photoshop plugin that would solve both, but that's way over what I can do.
Also new versions of photoshop do have regular onion skins, but I think there are better programs for animation. I tried Clip studio and it works really well if you get over the setup, but it uses acceleration to add anti-aliasing when previewing the animation thus rendering it useless for pixel art.
Also new versions of photoshop do have regular onion skins, but I think there are better programs for animation. I tried Clip studio and it works really well if you get over the setup, but it uses acceleration to add anti-aliasing when previewing the animation thus rendering it useless for pixel art.
Re: [SPRITES] Spriting Carnival!!
My first attempt at rendering a weapon sprite from a 3D model in Blender. Still trying to get the lighting just right; I wonder if importing some normals+roughness+specular maps into the scene will help it shade a little more realistically. Are you guys aware of any Blender extensions which can preview a model in indexed color mode?
Excited to get better at this.
Excited to get better at this.
- Attachments
-
- untitled.png (4.44 KiB) Viewed 1145 times
Re: [SPRITES] Spriting Carnival!!
I would suggest changing the viewpoint a bit to the right (or move the weeapon to the left) so the angle is sharper, I think it looks much better than the 45 degree angle.
Re: [SPRITES] Spriting Carnival!!
I think you're right, it looks a little better (and the barrel looks less like a weird sideways protrusion) at a sharper angle. I've fiddled greatly with the lighting, and tweaked the colors a little in gimp to make it look more palettized. Still not quite there, but it's getting better.
- Attachments
-
- M3 Grease Gun
- untitled.png (4.05 KiB) Viewed 883 times
- ChopBlock223
- Posts: 80
- Joined: Tue Apr 02, 2019 3:19 pm
- Operating System Version (Optional): Windows 10 with extensive trimming and regedits.
- Graphics Processor: nVidia (Modern GZDoom)
Re: [SPRITES] Spriting Carnival!!
Very nice. Looks like the A1 model. I always thought the Greaseguns were really neat for how incredibly simple and fast their manufacture was, they'd make most of the gun's body by stamping a left side half and right side half out of sheet metal, then welding them together to make the receiver.
Subguns of that era have such a strong industrial look to them.
Subguns of that era have such a strong industrial look to them.