[SPRITES] Spriting Carnival!!
Re: [SPRITES] Spriting Carnival!!
Those are some rad designs, D3ath. Though how are you gonna implement the MG61, since you already have the Venom Gun?
- D3athStalker
- Posts: 234
- Joined: Sun Feb 28, 2016 10:45 am
- Location: The evil world that is known as Heck
Re: [SPRITES] Spriting Carnival!!
It's gonna be one of the disposable heavy weapons that can't be dual wielded or cross wielded. You can disassemble the heavy weapons to further upgrade certain weapons. In this case, disassembling MG-61 will upgrade Venom Gun.Jeimuzu73 wrote:Those are some rad designs, D3ath. Though how are you gonna implement the MG61, since you already have the Venom Gun?
- Dr_Cosmobyte
- Posts: 2759
- Joined: Thu Jun 04, 2015 9:07 pm
- Location: Killing spiders.
Re: [SPRITES] Spriting Carnival!!
Nice to see ny ideas serve as inspiration! I wish i had your creativity for Frankenspriting at the moment because... damn i haven't created a good plasma-BFG-esque weapon in months.
EDIT: Since nobody posted...
Here's a (edited) Radar from Demolition Man (3DO):
EDIT: Since nobody posted...
Here's a (edited) Radar from Demolition Man (3DO):
- Captain J
-
- Posts: 16890
- Joined: Tue Oct 02, 2012 2:20 am
- Location: An ancient Escape Shuttle(No longer active here anymore)
- Contact:
Re: [SPRITES] Spriting Carnival!!
Oooooo Badass and Big Weaponry. And i thank you for using my resources too!D3athStalker wrote:The remaining heavy weapons:
- TiberiumSoul
- Posts: 1065
- Joined: Fri Jan 20, 2012 11:29 pm
- Graphics Processor: nVidia (Modern GZDoom)
- Location: My Computer...
Re: [SPRITES] Spriting Carnival!!
I did a thing.
original model by ProgramerNetwork on Deviantart
Following Marty's Tutorial on XPS Model Ripping
original model by ProgramerNetwork on Deviantart
Following Marty's Tutorial on XPS Model Ripping
- Captain J
-
- Posts: 16890
- Joined: Tue Oct 02, 2012 2:20 am
- Location: An ancient Escape Shuttle(No longer active here anymore)
- Contact:
Re: [SPRITES] Spriting Carnival!!
That definitely looks like it's from the good ol' era of doom modding. Pretty cool!
- ChopBlock223
- Posts: 80
- Joined: Tue Apr 02, 2019 3:19 pm
- Operating System Version (Optional): Windows 10 with extensive trimming and regedits.
- Graphics Processor: nVidia (Modern GZDoom)
Re: [SPRITES] Spriting Carnival!!
https://i.imgur.com/A83l6CB.gif
I made a Sniper's Rifle / Designated Marksman's Rifle.
The scope is based on a graphic by MatthewTheGlutton, from his Hideous Destructor, with permission, the rest is made from Id sprites.
Use as you feel like. No reticle included, figure that out yourself.
I picture it as some manner of roller delayed blowback rifle (but not a CETME/H&K design), with a fully free-floated barrel, and with a recoil buffer inside the stock (I'm fond of those). Probably in a cartridge like .300 Winchester Magnum
I made a Sniper's Rifle / Designated Marksman's Rifle.
The scope is based on a graphic by MatthewTheGlutton, from his Hideous Destructor, with permission, the rest is made from Id sprites.
Use as you feel like. No reticle included, figure that out yourself.
I picture it as some manner of roller delayed blowback rifle (but not a CETME/H&K design), with a fully free-floated barrel, and with a recoil buffer inside the stock (I'm fond of those). Probably in a cartridge like .300 Winchester Magnum
Re: [SPRITES] Spriting Carnival!!
Very nice sprite work (also the previous ones)! I also dig how you describe what kind of in-game usage/gun type you imagine! Good game design foundations, kudosChopBlock223 wrote: I made a Sniper's Rifle / Designated Marksman's Rifle.
The scope is based on a graphic by MatthewTheGlutton, from his Hideous Destructor, with permission, the rest is made from Id sprites.
Use as you feel like. No reticle included, figure that out yourself.
I picture it as some manner of roller delayed blowback rifle (but not a CETME/H&K design), with a fully free-floated barrel, and with a recoil buffer inside the stock (I'm fond of those). Probably in a cartridge like .300 Winchester Magnum
Would we sit at the same table, I'd silently grin, nod and hand you my fist to bump
- Kinsie
- Posts: 7399
- Joined: Fri Oct 22, 2004 9:22 am
- Graphics Processor: nVidia with Vulkan support
- Location: MAP33
- Contact:
Re: [SPRITES] Spriting Carnival!!
Tried to figure out a player sprite design for MetaDoom.
It'll need some rethinking - the Doom 3 belt would basically be covered up by the player's gun the whole time - and I never got around to the feet (wanted to use the Doom 2016 feet but couldn't get it right and didn't have any sprites with appropriate permissions handy) - but it's something to look at, at least.
It'll need some rethinking - the Doom 3 belt would basically be covered up by the player's gun the whole time - and I never got around to the feet (wanted to use the Doom 2016 feet but couldn't get it right and didn't have any sprites with appropriate permissions handy) - but it's something to look at, at least.
- Captain J
-
- Posts: 16890
- Joined: Tue Oct 02, 2012 2:20 am
- Location: An ancient Escape Shuttle(No longer active here anymore)
- Contact:
Re: [SPRITES] Spriting Carnival!!
Pretty neat and new, while trying to keep up the each doomguy's design imo! And i think his belt looks very big. Why not make the chest armor large as well? To fit the belt's width.
-
- Posts: 533
- Joined: Fri Sep 11, 2015 5:26 am
Re: [SPRITES] Spriting Carnival!!
what was based off of?Kinsie wrote:Tried to figure out a player sprite design for MetaDoom.
[imghttps://i.imgur.com/C4fD1zu.png/img]
It'll need some rethinking - the Doom 3 belt would basically be covered up by the player's gun the whole time - and I never got around to the feet (wanted to use the Doom 2016 feet but couldn't get it right and didn't have any sprites with appropriate permissions handy) - but it's something to look at, at least.
-
- Posts: 409
- Joined: Fri Feb 10, 2017 2:17 pm
- Preferred Pronouns: He/Him
- Graphics Processor: nVidia (Modern GZDoom)
Re: [SPRITES] Spriting Carnival!!
This looks like a great DoomPlayer Skin. Granted, it's not yet finished, but it looks great imo. 5/5Kinsie wrote:Tried to figure out a player sprite design for MetaDoom.
It'll need some rethinking - the Doom 3 belt would basically be covered up by the player's gun the whole time - and I never got around to the feet (wanted to use the Doom 2016 feet but couldn't get it right and didn't have any sprites with appropriate permissions handy) - but it's something to look at, at least.
Re: [SPRITES] Spriting Carnival!!
Looks awesome but i thought that to represent the Slayer's praetor suit from 2016, you could add a red dot somewhere in the armor and maybe some red thing in the helmet to represent the "mark of the slayer".Kinsie wrote:Tried to figure out a player sprite design for MetaDoom.
It'll need some rethinking - the Doom 3 belt would basically be covered up by the player's gun the whole time - and I never got around to the feet (wanted to use the Doom 2016 feet but couldn't get it right and didn't have any sprites with appropriate permissions handy) - but it's something to look at, at least.
And with Eternal, would it be crazy to add the shoulder canon?
I mean, the way how inventory works kinda resembles that.
An extra detail could be a red dot in the back as a reference to Doom 2's cover art (the one where he fights the cybie) but that's just a silly idea.
- Kinsie
- Posts: 7399
- Joined: Fri Oct 22, 2004 9:22 am
- Graphics Processor: nVidia with Vulkan support
- Location: MAP33
- Contact:
Re: [SPRITES] Spriting Carnival!!
If you're willing to put together your own concept/prototype, I'm willing to consider it.whatup876 wrote:Looks awesome but i thought that to represent the Slayer's praetor suit from 2016, you could add a red dot somewhere in the armor and maybe some red thing in the helmet to represent the "mark of the slayer".Kinsie wrote:Tried to figure out a player sprite design for MetaDoom.
It'll need some rethinking - the Doom 3 belt would basically be covered up by the player's gun the whole time - and I never got around to the feet (wanted to use the Doom 2016 feet but couldn't get it right and didn't have any sprites with appropriate permissions handy) - but it's something to look at, at least.
And with Eternal, would it be crazy to add the shoulder canon?
I mean, the way how inventory works kinda resembles that.
An extra detail could be a red dot in the back as a reference to Doom 2's cover art (the one where he fights the cybie) but that's just a silly idea.