[SPRITES] Spriting Carnival!!
- raymoohawk
- Posts: 1153
- Joined: Fri Jan 17, 2014 7:16 pm
Re: [SPRITES] Spriting Carnival!!
attempted to sprite on sketchbook pro, not a good idea, had to do lots of clean up in photoshop afterwards, here is my unfinished attempt
- Captain J
-
- Posts: 16890
- Joined: Tue Oct 02, 2012 2:20 am
- Location: An ancient Escape Shuttle(No longer active here anymore)
- Contact:
Re: [SPRITES] Spriting Carnival!!
neat work! but that gun arms at the front sight is pretty bent unlike than the others, also out of color schemes.
Re: [SPRITES] Spriting Carnival!!
The detail on the tail seems completely different between the second and third pic. Odd.
- Captain J
-
- Posts: 16890
- Joined: Tue Oct 02, 2012 2:20 am
- Location: An ancient Escape Shuttle(No longer active here anymore)
- Contact:
Re: [SPRITES] Spriting Carnival!!
so...it's finished eventually. it was been late because of overwhelming fatigues and eyesores. god, i hate that shit. i didn't slept for a long times for reason, so that happens.arby26 from gamebanana.
oh, also i'd appreciated if someone's willing to put the laser sight at the crosshair.
glory to oh, also i'd appreciated if someone's willing to put the laser sight at the crosshair.
Re: [SPRITES] Spriting Carnival!!
raymoohawk wrote:attempted to sprite on sketchbook pro, not a good idea, had to do lots of clean up in photoshop afterwards, here is my unfinished attempt
Jeeez!!
The 3/4 quarter view is a little extreme, it's almost side-on.
Re: [SPRITES] Spriting Carnival!!
That looks very cool but if the intention is for it to be a doom sprite, the fact that the graphic is much wider in the side view than the front view is likely to be problematic in a whole range of mapping and rendering situations.raymoohawk wrote:
Re: [SPRITES] Spriting Carnival!!
Enjay wrote:That looks very cool but if the intention is for it to be a doom sprite, the fact that the graphic is much wider in the side view than the front view is likely to be problematic in a whole range of mapping and rendering situations.raymoohawk wrote:
Wait, is that a thing?
Re: [SPRITES] Spriting Carnival!!
Well, the problem is that Doom entities are square. So, if you have an enemy that is significantly longer than it is wide visually, it won't match up with its actual size.
You'd have to decide what width to make the underlying actor. Do you make it nearer to the width or the length of the sprite? Do you have a compromise? If you make it big, then it can't fit through gaps that it looks like it should be able to (from front on at least). If you make it small, then bits of it will stick out past its bounding box and could poke through walls or it could even appear/disappear if it was at the edge of your view and standing in a small sector.
You'd have to decide what width to make the underlying actor. Do you make it nearer to the width or the length of the sprite? Do you have a compromise? If you make it big, then it can't fit through gaps that it looks like it should be able to (from front on at least). If you make it small, then bits of it will stick out past its bounding box and could poke through walls or it could even appear/disappear if it was at the edge of your view and standing in a small sector.
Re: [SPRITES] Spriting Carnival!!
I removed it. NeutralStunner quoted what i said below, as it was a request more than a sprite.
Last edited by Athel on Tue Jan 06, 2015 3:42 pm, edited 1 time in total.
- Tapwave
- Posts: 2096
- Joined: Sat Aug 20, 2011 8:54 am
- Preferred Pronouns: No Preference
- Graphics Processor: nVidia with Vulkan support
Re: [SPRITES] Spriting Carnival!!
Was thinking of some kind of large heatsink or compensator. They're mostly just leftovers of my clean crossbow sprite I used as a base.wildweasel wrote:A rather large muzzle brake, possibly.smoke_th wrote:I sincerely doubt it. I mean it looks like someone threw pair of techno-horns onto a gun. What function do they do?
It's going to be a 'slow light' laser vulcan in my mod.
The sigil won't get more frames because it was a total bitch to edit, even if it was super simple: I just added an extra steel beam across the frame, and doubled the techy holes and cleaned them a little.
I'm using it as a zap-ring to force monsters into painstate (so it's just a lot of high-diff railbeams). Also you can just basically just copypaste the sigil flash over this and it'll work just fine.
- NeuralStunner
-
- Posts: 12326
- Joined: Tue Jul 21, 2009 12:04 pm
- Preferred Pronouns: He/Him
- Graphics Processor: nVidia with Vulkan support
- Location: capital N, capital S, no space
- Contact:
Re: [SPRITES] Spriting Carnival!!
Wait, what? It's an erratic color blob. You're basically asking someone to make a complete sprite out of it. That's not how things work.fellowzdoomer wrote:
Can anyone apply Dodge and Burn to this shotgun? Im going to clean it up a bit afterwards.
Re: [SPRITES] Spriting Carnival!!
Also: make it large and from the front you'll be able to hurt it by visually shooting next to it (blood will spurt out of empty air). Make it thin and you get the reverse problem: when shooting at it from the side, you can see your shots disappearing through the sprite harmlessly.Enjay wrote:Well, the problem is that Doom entities are square. So, if you have an enemy that is significantly longer than it is wide visually, it won't match up with its actual size.
You'd have to decide what width to make the underlying actor. Do you make it nearer to the width or the length of the sprite? Do you have a compromise? If you make it big, then it can't fit through gaps that it looks like it should be able to (from front on at least). If you make it small, then bits of it will stick out past its bounding box and could poke through walls or it could even appear/disappear if it was at the edge of your view and standing in a small sector.
- Galaxy_Stranger
- Posts: 1326
- Joined: Sat Aug 16, 2003 11:42 pm
- Location: Shropshire
- Contact:
Re: [SPRITES] Spriting Carnival!!
I guess I should have posted this here:
Team Fortress Classic ideas using Marine Skins, VWeps, Blake Stone and Strife, etc.
Team Fortress Classic ideas using Marine Skins, VWeps, Blake Stone and Strife, etc.
- Carbine Dioxide
- Posts: 1927
- Joined: Thu Jun 12, 2014 3:16 pm
- Location: Anywhere.
Re: [SPRITES] Spriting Carnival!!
I like how you used the Nail Borg Commando's gun as a grenade launcher. I like the medic too.
Re: [SPRITES] Spriting Carnival!!
Is this something for Resource Request thread? I apologize.NeuralStunner wrote:Wait, what? It's an erratic color blob. You're basically asking someone to make a complete sprite out of it. That's not how things work.fellowzdoomer wrote:
Can anyone apply Dodge and Burn to this shotgun? Im going to clean it up a bit afterwards.