SLADE Discussion - Latest: v3.2.5 (19/Dec/2023)
Forum rules
The Projects forums are ONLY for YOUR PROJECTS! If you are asking questions about a project, either find that project's thread, or start a thread in the General section instead.
Got a cool project idea but nothing else? Put it in the project ideas thread instead!
Projects for any Doom-based engine (especially 3DGE) are perfectly acceptable here too.
Please read the full rules for more details.
The Projects forums are ONLY for YOUR PROJECTS! If you are asking questions about a project, either find that project's thread, or start a thread in the General section instead.
Got a cool project idea but nothing else? Put it in the project ideas thread instead!
Projects for any Doom-based engine (especially 3DGE) are perfectly acceptable here too.
Please read the full rules for more details.
- mty
- Posts: 46
- Joined: Thu Mar 29, 2018 1:48 pm
- Graphics Processor: nVidia with Vulkan support
- Location: EU
- Contact:
Re: SLADE Discussion - Latest: v3.1.2 Beta 5 (11/Sep/2017)
Also the text editor behaves a bit strange to me.
When you edit a file in the right pane and edit it, everything behaves as expected. But when you open a text file with a double click, CTRL+S doesnt work, and you are not warned about unsaved changes + CTRL+W closes the whole PK3, instead of just the text file. Is this intended?
When you edit a file in the right pane and edit it, everything behaves as expected. But when you open a text file with a double click, CTRL+S doesnt work, and you are not warned about unsaved changes + CTRL+W closes the whole PK3, instead of just the text file. Is this intended?
Re: SLADE Discussion - Latest: v3.1.2 Beta 5 (11/Sep/2017)
You can't close a text entry, the entry content panel is always there. What you can do is click on another entry to change it.
- sirjuddington
- Posts: 1025
- Joined: Wed Jul 16, 2003 4:47 am
- Location: Australia
- Contact:
Re: SLADE Discussion - Latest: v3.1.2 Beta 5 (11/Sep/2017)
Yeah that issue was already reported here: https://github.com/sirjuddington/SLADE/issues/549. It's not really a bug since Ctrl+S is 'Save Archive'. Making it behave differently if an entry tab is open would make things inconsistent in that regard, though it is pretty un-intuitive I agree.
- mty
- Posts: 46
- Joined: Thu Mar 29, 2018 1:48 pm
- Graphics Processor: nVidia with Vulkan support
- Location: EU
- Contact:
Re: SLADE Discussion - Latest: v3.1.2 Beta 5 (11/Sep/2017)
Yeah i thought so, didn't find that issue, sorry for double reporting.
I hope I'm not going on your nerves too much with all my recent activities (I'm matthiasmendler on github) xD I just got a daughter and so I'm on holidays at home, using my free time to edit doom, and now also going through slade's code.
Thanks again.
I hope I'm not going on your nerves too much with all my recent activities (I'm matthiasmendler on github) xD I just got a daughter and so I'm on holidays at home, using my free time to edit doom, and now also going through slade's code.
Thanks again.
- sirjuddington
- Posts: 1025
- Joined: Wed Jul 16, 2003 4:47 am
- Location: Australia
- Contact:
Re: SLADE Discussion - Latest: v3.1.2 Beta 5 (11/Sep/2017)
Not at all, feel free to submit pull requests for things you add/fix too.mty wrote:Yeah i thought so, didn't find that issue, sorry for double reporting.
I hope I'm not going on your nerves too much with all my recent activities (I'm matthiasmendler on github) xD I just got a daughter and so I'm on holidays at home, using my free time to edit doom, and now also going through slade's code.
Thanks again.
- Void Weaver
- Posts: 724
- Joined: Thu Dec 18, 2014 7:15 am
- Contact:
Re: SLADE Discussion - Latest: v3.1.2 Beta 5 (11/Sep/2017)
Just a few questions about SLADE Run Configuration Setup parameters. I use the next line:but are some parameters seems doesn't work or are work not as intended:
1) +map MAP20 - doesn't work
2) +give all - gives all exclude weapons
3) +chase - doesn't work, like as other command variations (+chase 1, +chasecam, +chasemode, +chaseon)
So, what I doing wrong and how to enable this commands?
Btw, is have somewhere a complete list of eligible parameters for SLADE command line?
SLADE version 3.1.1.5
P. S. And I know about autoexec command-key binding, but I need a some quick presets for testing.
Code: Select all
-iwad "C:\Games\Doom\DOOM2.wad" -file %r %a +map MAP20 -skill 5 +sv_cheats 1 +notarget +buddha +noclip +give all +give megasphere +chase 1
1) +map MAP20 - doesn't work
2) +give all - gives all exclude weapons
3) +chase - doesn't work, like as other command variations (+chase 1, +chasecam, +chasemode, +chaseon)
So, what I doing wrong and how to enable this commands?
Btw, is have somewhere a complete list of eligible parameters for SLADE command line?
SLADE version 3.1.1.5
P. S. And I know about autoexec command-key binding, but I need a some quick presets for testing.
Re: SLADE Discussion - Latest: v3.1.2 Beta 5 (11/Sep/2017)
IIRC give all CCMD has some quirks when used from command line.
At the moment chase cannot be used from command line because technically game isn't in playing state yet.
So, those aren't problems of SLADE but map apparently should work.
At the moment chase cannot be used from command line because technically game isn't in playing state yet.
So, those aren't problems of SLADE but map apparently should work.
- Void Weaver
- Posts: 724
- Joined: Thu Dec 18, 2014 7:15 am
- Contact:
Re: SLADE Discussion - Latest: v3.1.2 Beta 5 (11/Sep/2017)
Oh. Thank you for explanations, but the map warping still not work, in my case at least.
Re: SLADE Discussion - Latest: v3.1.2 Beta 5 (11/Sep/2017)
I've been having a problem with Slade 3 where there is no UI. Tried too look for a solution for a while now, and haven't come across anything to solve this. I'm not exactly sure what caused this.
[imgur]https://i.imgur.com/X8MFqKR[/imgur]
[imgur]https://i.imgur.com/X8MFqKR[/imgur]
Last edited by Blue Shadow on Sun Apr 29, 2018 11:06 pm, edited 1 time in total.
Reason: Used [imgur] tag on screenshot(s).
Reason: Used [imgur] tag on screenshot(s).
- Kappes Buur
-
- Posts: 4120
- Joined: Thu Jul 17, 2003 12:19 am
- Graphics Processor: nVidia (Legacy GZDoom)
- Location: British Columbia, Canada
- Contact:
Re: SLADE Discussion - Latest: v3.1.2 Beta 5 (11/Sep/2017)
- Have you been using Slade3 before and this started happening recently ?
- Is this a new installation of Slade3 ?
If it is, did you install the Microsoft Visual C++ 2015 Runtime ?
Re: SLADE Discussion - Latest: v3.1.2 Beta 5 (11/Sep/2017)
You can forget about the runtime, if it was the issue, SLADE wouldn't start at all.Kappes Buur wrote:
- Have you been using Slade3 before and this started happening recently ?
- Is this a new installation of Slade3 ?
If it is, did you install the Microsoft Visual C++ 2015 Runtime ?
My recommendation would be to make sure the slade pk3 is up to date (i.e. you didn't update SLADE by just installing the new exe without changing the older files) and to erase (or move away to a different directory for backup) the slade configuration file that should be, on Windows systems, in %APPDATA%\SLADE3\.
Re: SLADE Discussion - Latest: v3.1.2 Beta 5 (11/Sep/2017)
Wish I knew this way earlier.
Deleting the configuration file worked and now I can be able to go back to modding again.
Thanks for the help.
Deleting the configuration file worked and now I can be able to go back to modding again.
Thanks for the help.
- DoomKrakken
- Posts: 3482
- Joined: Sun Oct 19, 2014 6:45 pm
- Location: Plahnit Urff
- Contact:
Re: SLADE Discussion - Latest: v3.1.2 Beta 5 (11/Sep/2017)
Mty, how did you get the fully dark theme on SLADE3?
Re: SLADE Discussion - Latest: v3.1.2 Beta 5 (11/Sep/2017)
Do I report issues here?
If so, what will you need? Here's the link describing some of my situation...
tl;dr - trying to compile Slade to run on my Linux distro, because the one I have isn't debian-based; picked a different wx-config, causing a name conflict.
viewtopic.php?f=4&t=60535
If so, what will you need? Here's the link describing some of my situation...
tl;dr - trying to compile Slade to run on my Linux distro, because the one I have isn't debian-based; picked a different wx-config, causing a name conflict.
viewtopic.php?f=4&t=60535
Re: SLADE Discussion - Latest: v3.1.2 Beta 5 (11/Sep/2017)
Change your OS' own theme.DoomKrakken wrote:Mty, how did you get the fully dark theme on SLADE3?
If you don't know how to do that, make a web search for "dark theme" with your OS or desktop manager's name (Windows 7, 8, 10; OSX; KDE; GNOME; whatever).