ZDoom

Discussion about ZDoom
https://forum.zdoom.org/

Hide "invalid sound position/velocity" messages

https://forum.zdoom.org/viewtopic.php?t=61420

Page 3 of 4

Re: Hide "invalid sound position/velocity" messages

Posted: Mon Aug 20, 2018 6:42 am
by Talon1024
For some reason, I get invalid sound position/velocity messages on TNT: Revilution MAP16 after a while, even if I load a mod that removes all the monsters.

Re: Hide "invalid sound position/velocity" messages

Posted: Thu Nov 01, 2018 7:20 am
by Major Cooke
It would be greatly appreciated if these could be hidden or at least have a way to turn them off on the clientside.. I sometimes gain these when, in D4D, monsters are blasted by the BFG such as the Lost Soul.

It gets very spammy.

In my case it's only happening when they are simply launched ridiculous speeds because the dying actor gains +NOINTERACTION and uses velocity to fling a 'fake' of itself. Sure I could just call A_StopSound to shut it up which I probably will if this doesn't go away.

Re: Hide "invalid sound position/velocity" messages

Posted: Thu Nov 01, 2018 7:43 am
by _mental_
I agree to make it optional, like developer CVAR should be set to at least one to display them.
Although, it's only about messages as those actors still won't emit any sound.

Re: Hide "invalid sound position/velocity" messages

Posted: Thu Nov 01, 2018 7:56 am
by Major Cooke
That's fine by me.

Re: Hide "invalid sound position/velocity" messages

Posted: Mon Nov 05, 2018 11:31 pm
by Major Cooke
Admittedly, for once, I'm glad it's on.

Because getting NaN for positions is not right at all. I'm making a bug report about it as soon as I get more info.

Re: Hide "invalid sound position/velocity" messages

Posted: Tue Nov 06, 2018 12:21 am
by _mental_
If I knew that this warning will cause such attention, I would add reporting for invalid values only and keep out-of-bounds position/velocity as is.

Re: Hide "invalid sound position/velocity" messages

Posted: Sun Jan 06, 2019 2:45 pm
by Player701
Eh, I'm not sure if it's worth making a bug report for this because PrBoom-Plus seems to work the same way, but I've found a map which makes GZDoom produce a lot of "invalid sound position" messages after pressing a certain switch. This happens on Hadephobia MAP19. To reproduce, use the following command-line parameters:

Code: Select all

gzdoom.exe -file h_phobia.wad -nomonsters -warp 19 +"warp 1664 784"
Turn around and press the switch. In a few minutes, the "invalid sound position" message spam will start. It appears that the floor of sector 195, which is triggered to lower when the switch is pressed, doesn't stop where it has to and continues lowering towards negative infinity. Once the floor height passes a certain threshold, it triggers these warnings. I haven't got any crashes from this behavior so far, but this message spam kind of interferes with the gameplay. :?

Re: Hide "invalid sound position/velocity" messages

Posted: Sun Jan 06, 2019 3:05 pm
by Enjay
FWiW, it took just shy of 4 minutes after pressing the switch for the messages to start spamming, but when they did, it was constant.


Just a little sample, the full log file by the time I quit breaks the forum character limit:

Code: Select all

Invalid sound position (1984.000000, 2184.000000, -32772.000000)
Invalid sound position (1984.000000, 2184.000000, -32776.000000)
Invalid sound position (1984.000000, 2184.000000, -32780.000000)
Invalid sound position (1984.000000, 2184.000000, -32784.000000)
Invalid sound position (1984.000000, 2184.000000, -32788.000000)
Invalid sound position (1984.000000, 2184.000000, -32792.000000)
Invalid sound position (1984.000000, 2184.000000, -32796.000000)
Invalid sound position (2002.150879, 2184.000000, -32800.000000)
Invalid sound position (2022.977661, 2184.000000, -32804.000000)
Invalid sound position (2043.691284, 2184.000000, -32808.000000)
Invalid sound position (2062.796387, 2184.000000, -32812.000000)
Invalid sound position (2080.443604, 2184.000000, -32816.000000)
Invalid sound position (2096.770020, 2184.000000, -32820.000000)
Invalid sound position (2111.899170, 2184.000000, -32824.000000)
Invalid sound position (2112.000000, 2184.000000, -32828.000000)
Invalid sound position (2112.000000, 2184.000000, -32832.000000)
Invalid sound position (2112.000000, 2184.000000, -32836.000000)
Invalid sound position (2112.000000, 2184.000000, -32840.000000)
Invalid sound position (2112.000000, 2184.000000, -32844.000000)
Invalid sound position (2112.000000, 2184.000000, -32848.000000)
Invalid sound position (2112.000000, 2184.000000, -32852.000000)
Invalid sound position (2112.000000, 2184.000000, -32856.000000)
Invalid sound position (2112.000000, 2184.000000, -32860.000000)
Invalid sound position (2112.000000, 2184.000000, -32864.000000)
Invalid sound position (2112.000000, 2184.000000, -32868.000000)
Invalid sound position (2112.000000, 2184.000000, -32872.000000)
Invalid sound position (2112.000000, 2184.000000, -32876.000000)
Invalid sound position (2112.000000, 2184.000000, -32880.000000)
Invalid sound position (2112.000000, 2184.000000, -32884.000000)
Invalid sound position (2112.000000, 2184.000000, -32888.000000)
Invalid sound position (2112.000000, 2184.000000, -32892.000000)
Invalid sound position (2112.000000, 2184.000000, -32896.000000)
Invalid sound position (2112.000000, 2184.000000, -32900.000000)
Invalid sound position (2112.000000, 2184.000000, -32904.000000)
Invalid sound position (2112.000000, 2184.000000, -32908.000000)
Invalid sound position (2112.000000, 2184.000000, -32912.000000)
Invalid sound position (2112.000000, 2184.000000, -32916.000000)
Invalid sound position (2112.000000, 2184.000000, -32920.000000)
Invalid sound position (2112.000000, 2184.000000, -32924.000000)
Invalid sound position (2112.000000, 2184.000000, -32928.000000)
Invalid sound position (2112.000000, 2184.000000, -32932.000000)
Invalid sound position (2112.000000, 2184.000000, -32936.000000)
Invalid sound position (2112.000000, 2184.000000, -32940.000000)
Invalid sound position (2112.000000, 2184.000000, -32944.000000)
Invalid sound position (2112.000000, 2184.000000, -32948.000000)
Invalid sound position (2112.000000, 2184.000000, -32952.000000)
Invalid sound position (2112.000000, 2184.000000, -32956.000000)
Invalid sound position (2112.000000, 2184.000000, -32960.000000)
Invalid sound position (2112.000000, 2184.000000, -32964.000000)
Invalid sound position (2112.000000, 2184.000000, -32968.000000)
Invalid sound position (2112.000000, 2184.000000, -32972.000000)
Invalid sound position (2112.000000, 2184.000000, -32976.000000)
Invalid sound position (2112.000000, 2184.000000, -32980.000000)
Invalid sound position (2112.000000, 2184.000000, -32984.000000)
Invalid sound position (2112.000000, 2184.000000, -32988.000000)
Invalid sound position (2112.000000, 2184.000000, -32992.000000)
Invalid sound position (2112.000000, 2184.000000, -32996.000000)
Invalid sound position (2112.000000, 2184.000000, -33000.000000)
Invalid sound position (2112.000000, 2184.000000, -33004.000000)
Invalid sound position (2112.000000, 2184.000000, -33008.000000)
Invalid sound position (2112.000000, 2184.000000, -33012.000000)
Invalid sound position (2112.000000, 2184.000000, -33016.000000)
Invalid sound position (2112.000000, 2184.000000, -33020.000000)
Invalid sound position (2112.000000, 2184.000000, -33024.000000)
Invalid sound position (2112.000000, 2184.000000, -33028.000000)
Invalid sound position (2112.000000, 2184.000000, -33032.000000)
Invalid sound position (2112.000000, 2184.000000, -33036.000000)
Invalid sound position (2112.000000, 2184.000000, -33040.000000)
Invalid sound position (2112.000000, 2184.000000, -33044.000000)
Invalid sound position (2112.000000, 2184.000000, -33048.000000)
Invalid sound position (2112.000000, 2184.000000, -33052.000000)
Invalid sound position (2112.000000, 2184.000000, -33056.000000)
Invalid sound position (2112.000000, 2184.000000, -33060.000000)

Re: Hide "invalid sound position/velocity" messages

Posted: Mon Jan 07, 2019 3:38 am
by _mental_
Graf, are you OK with checking for infinite values only to output this message? I'm really tired of it, but making it optional is equal to making it useless IMHO.

Re: Hide "invalid sound position/velocity" messages

Posted: Mon Jan 07, 2019 5:01 am
by XLightningStormL
Fix your mod then, instead of asking the developers to fix it for you with a bunch of pointless code. :P

Re: Hide "invalid sound position/velocity" messages

Posted: Mon Jan 07, 2019 5:03 am
by Rachael
Wouldn't it be better to possibly do a compatibility fix on the offending object so that it cannot fall below Z -32768.00?

Re: Hide "invalid sound position/velocity" messages

Posted: Mon Jan 07, 2019 10:22 am
by wildweasel
XLightningStormL wrote:Fix your mod then, instead of asking the developers to fix it for you with a bunch of pointless code. :P
"Fix your mod" isn't necessarily a solution when "your mod" is somebody else's mod from years ago that worked fine until recently. (Especially if, in the case of a handful of mods I know, their licenses restrict people from releasing modified/fixed versions.)

Re: Hide "invalid sound position/velocity" messages

Posted: Mon Jan 07, 2019 10:48 am
by Matt
I remember asking a couple months back if a certain troublesome thing could be made to be subject to ZScript versioning and it was considered impossible or at least impractical to the point of impossibility, was it this?

Re: Hide "invalid sound position/velocity" messages

Posted: Mon Jan 07, 2019 6:01 pm
by Chris
_mental_ wrote:Graf, are you OK with checking for infinite values only to output this message? I'm really tired of it, but making it optional is equal to making it useless IMHO.
IIRC, the message was originally added because of errant NaNs being generated in a mod, so at the very least it should be non-finite values.

Re: Hide "invalid sound position/velocity" messages

Posted: Tue Jan 08, 2019 1:23 am
by Graf Zahl
I think the value range should at least be expanded. But if some truly outlandish numbers get through here they should still be reported. Something like 40000 may just be a quirk with the game physics, but something like, say 1'000'000 normally is a sign of an error.
All times are UTC-06:00
Page 3 of 4

Powered by phpBB® Forum Software © phpBB Limited