Color settings not applied automatically

Forum rules
Please don't bump threads here if you have a problem - it will often be forgotten about if you do. Instead, make a new thread here.

Post a reply

Smilies
:D :) :( :o :shock: :? 8-) :lol: :x :P :oops: :cry: :evil: :twisted: :roll: :wink: :geek: :ugeek: :!: :?: :idea: :arrow: :| :mrgreen: :3: :wub: >:( :blergh:
View more smilies

BBCode is OFF
Smilies are ON

Topic review
   

Expand view Topic review: Color settings not applied automatically

Re: Color settings not applied automatically

by drfrag » Wed Jan 08, 2020 1:12 pm

For me (AMD) contrast and saturation work well with hardware gamma so off this goes.

Re: Color settings not applied automatically

by Rachael » Tue Dec 03, 2019 12:42 am

vid_hwgamma is something that I removed from the GZDoom mainline (it's hard-set to "1" now).

But for LZDoom, here's what the actual values are:

0 - Force display driver gamma
1 - Force shader gamma
2 - Display driver gamma in fullscreen only, shader in window mode

Shader gamma is more accurate, and does not destroy the color gamut in its output. With display gamma, the ugly color banding, particularly at darker colors, will become much more visible. That, and a litany of other issues is why it was ultimately removed. GZDoom no longer supports hardware that would've been unable to use shader gamma, anyhow, so there was no real benefit to keeping that old setting around.

Re: Color settings not applied automatically

by bLUEbYTE » Mon Dec 02, 2019 10:54 pm

Found a workaround. I came across this post viewtopic.php?f=7&t=63347#p1088300 which explains the different vid_hwgamma settings. Setting it to 1 makes the game apply color settings automatically. Because the previous setting of 2 means it was relying on the driver to do the adjustments (I'm always running in fullscreen), maybe it was the driver's fault.

Color settings not applied automatically

by bLUEbYTE » Mon Dec 02, 2019 8:06 pm

Hi,
I recently switched to LZDoom from GZDoom as it performs better on my system at high resolutions. Just discovered an issue though, where color settings like contrast don't get applied automatically. They are saved in the .ini and when I go to display settings, I can see the values set correctly. However, only after playing with one of the sliders for contrast, saturation etc. do I see the changes. Unfortunately the screenshots do not show any difference so they were useless to provide here.

So, this is how I reproduced this bug:
- Launch LZDoom with -warp switch to go into a map directly
- Observe that the colors are relatively washed out and lacking in vividness
- Modify the slider for contrast from 1.1 to 1.05, and it takes effect immediately, increasing the contrast visibly.

Because the contrast value was already at 1.1, turning it down a notch should have decreased the visible contrast rather than increasing.

Also, the saturation slider does not seem to have any effect.

System specs are Windows 10 x64 running LZDoom v3.83a. GFX card is Intel Iris Plus 655.

.ini file attached.
Attachments
lzdoom-A.ini
(25.77 KiB) Downloaded 42 times

Top